• Journal of Industrial Technology
• /
• v.38 no.1
• /
• pp.21-27
• /
• 2018

In January 2018, the Ministry of Education published "Seismic design criteria for school buildings" and "Manual for seismic performance evaluation and retrofit of school buildings" to evaluate seismic performances through linear analysis. This paper evaluates the seismic performance of an old school building through the linear analysis. The target building was constructed in the late 1970s, and the seismic-force-resisting system was assumed to be a reinforced concrete moment frame with an un-reinforced masonry wall. As a result of the evaluation, the target building does not satisfy the 'life safety' level of 1.2 times the design spectrum. The average strength ratio of moment frames, an indicator of the level of seismic performance tends to be controlled by beams. However, through the Pohang earthquake, it was known that the short column effect caused by the partially infilled masonry wall caused shear failure of the columns in school buildings. Therefore, it is necessary to improve the linear analysis so that the column controls the average strength ratio of moment frames.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.5
• /
• pp.119-127
• /
• 2008

In this paper, the influence of the stamping effect is investigated in the performance analysis of a side structure. The analysis covers the performance evaluation such as the crashworthiness and NVH. Stamping analyses are carried out for the center pillar and the side sill made of high strength steels. Then, numerical simulations are carried out in order to identify the stamping effect on the crashworthiness, the natural frequency and the normal mode. The result shows that the analysis of the side structure considering the forming history leads to a different result from that without considering the forming effect. The variation of the system response fully reveals effects of thinning and hardening of members on the performance prediction of vehicle parts. The analysis results demonstrate that the design of auto-body members should be carried out considering the stamping history for accurate assessment of various performances.

• Journal of the Korean Society for Library and Information Science
• /
• v.54 no.4
• /
• pp.107-122
• /
• 2020

In this Analysis using the evaluation data of public libraries located in Chungcheongnam-do, we compared and analyzed whether there was a difference in the average between the evaluation groups according to the size and institution of the public library, and analyzed the factors influencing the number of visitors to public libraries. The research data used public library evaluation data conducted in Chungcheongnam-do in 2020, and four areas of quantitative evaluation and nine detailed items were set as independent variables. Statistical analysis methods were T-test, ANOVA, and Regreesion. As a result of the analysis, it was found that there was a significant difference in the average of the evaluation group according to the affiliated organization and size. In addition, the factors affecting the number of visitors to public libraries were analyzed and presented. Implications were derived based on the analysis results, and can be used as a basis for establishing public library policies in the future.

• Korean Journal of Human Ecology
• /
• v.17 no.2
• /
• pp.305-313
• /
• 2008

This subject investigated visual evaluation of preference and fitness level of set-in sleeve in sleeve types(form)and studied suitable sleeve type at silhouette and targeted female students in twenties. The results of study were as follows: 1. Visual evaluation factors in set-in sleeve of sleeve types were selected 6 factors; the 1st factor is decorativeness, the 2nd factor is attractiveness, the 3rd factor was activeness, the 4th factor was feminine, the 5th factor was charming and 6th factor was a figural element. Decorativeness and attractiveness factors in visual evaluation of sleeve types were the most important level. 2. The visual evaluation differences of sleeve types in set-in sleeve were as follows; in the 1st factor, S and P2 were the most decorative sleeve type. in the 2nd factor, S, P2 and P3 are the most attractive sleeve type. in the 3rd factor, B and P3 were the most active sleeve type. in the 4th factor, L was the most feminine sleeve type. in the 5th factor, P1, L and P3 were charming sleeve type. in the 6th factor, P3 was evaluated that it shows narrowened shoulder sleeve types. 3. The analysis result of preference and wearing level in each sleeve types were as follows. 20's female university students like to wear S, P1, P2 and P3 sleeve types and the most favorite sleeve types are S, P2 and P3. 4. The analysis result of silhouette set-in sleeve in sleeve types; S, B and P2 in H-type silhouette, P2, S and P1 in A-type silhouette, B and P3 in O-type silhouette, L and P3 in X-types silhouette were show the most suitable sleeve types.

• Journal of Technology Innovation
• /
• v.26 no.2
• /
• pp.129-149
• /
• 2018

Technology finance is an area in which financial authorities have introduced and implemented a strong policy will for the advancement of the financial industry and the development of SMEs. As a result, the Bank's own technology evaluation was conducted from September 2016. Technically superior companies are upgrading their credit ratings, and as a result, they benefit from financial transactions as much as their higher credit ratings through technology evaluation. Based on the data generated during this process, we analyze the degree to which credit ratings was upgraded by technology evaluation. The pre study handles 406 data from KEB Hana Bank's technology evaluation conducted in the second half of 2016. As a result of combining the credit rating with the calculated technology rating, J58 'Publishing Activities' technology-credit rating is raised by 1.05 rating, which is the highest, and C10 'Manufacture of Food Products' is the second highest. As a result, we were able to identify the sectors that benefited from the technology evaluation and confirmed the usefulness of technology evaluation by industry(KSIC). To expanding the study, 2,719 companies evaluated during the entire period were analyzed by technology grade, business experience and promising growth industry code. As a result of the analysis, technological power over T-4 grade companies had the highest credit rating upgrades. The companies belonging to promising growth industries designated for efficiency of policy support, it is confirm that the support of the promising business type was useful because the credit grade was upgraded through technology evaluation. The validity of the technology evaluation based on the five-year business experience was found to be insignificant. In the future, it will be possible to maximize the support effect by concentration on the companies with over T-4 grade and growth potential companies when supporting SMEs.

• Journal of the Korean Society for Library and Information Science
• /
• v.21
• /
• pp.141-168
• /
• 1991

The Purpose of this study is to explore and analyse ways of enhancing the effectiveness of reference service through reference evaluation. Marketing research technique combined with pre-evaluation theory was applied in this study to find out information for practice the service based on current concept of reference service. Aims and results of this study can be summarised as follows: First, the evaluation of effectiveness of reference service should be conducted for the purpose of finding out the ways of increasing user's satisfaction. Second, the policy evaluation was understood as the appropriated evaluation concept. The policy evaluation in principle coincides with reference service in sense that the satisfaction of public should have priority and hence be the criterion of the evaluation. Third, marketing research based on recently developed 'marketing concept', which concentrates all its efforts to meet user's demand and attempt to acquire the information for better marketing management of non-profit organization such as library, is examined to find out the evaluation method practically applicable to the pre-evaluation of reference service. In this study , conjoint analysis was adopted as the method of pre-evaluation about reference service. The Reference Room of the Central Library Yonsei University, was selected as the arget sample to find out the expected condition for the maximization of the user's satisfaction from the reference service. Based on this example study, the analysis indicates as the most desirable combination for reference service in terms of the user's satisfaction is following condition: the younger librarian with aimable personality who displays willingness In his/her assistance, plus as the method of reference service, sufficient and practical introduction to the reference materials available, plus immediate and satisfactory result of the service, and finally a library equipped with inter-library use system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.40 no.1
• /
• pp.185-198
• /
• 2015

This study drew performance management factors analyzed a causal link between acceptance and satisfaction of performance management to present the method for promoting acceptance on the performance management system that most of the public enterprises, government-affiliated organizations are implementing. To achieve this, qualitative analysis and quantitative analysis were conducted in parallel through in-depth case studies and surveys. The results of this study are as follows. First, the analysis of the performance management factors with preceding studies shows that performance management indicators, performance management operations and performance management communications. Second, from the causal relationship of performance management factors affecting performance management acceptance reveals that performance management operation has statistical significance. Third, the analysis of the effect of performance management factors on the management satisfaction shows that operation and indicator of the performance management have statistical significance and reflecting the performance indicators to business, adequacy of target level, training, system support and CEO's Leadership have been revealed as important variables to the management satisfaction. Fourth, the result of the analysis on casual connection between acceptance and satisfaction of the performance management shows that improving management acceptance has a direct impact on satisfaction because performance management receptiveness were deemed statistically significant. Fifth, the result of the in-depth case studies on improving performance management acceptance shows that public enterprises have been putting in an effort to design indicators and try to encourage internal member's involvement during the monitoring and evaluation. The quantitative analysis based on survey has turned out that performance management operation and performance management indicators have statistical significance. The qualitative analysis by in-depth analysis shows that public enterprises put a lot of effort to performance management indicators and communication between internal members. As a result, commitment to performance management operation is required to improve the performance management acceptance. In other words, a detailed implementation plan for training, information system support, and CEO's leadership has to be established and ought to be pushed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.262-272
• /
• 2015

The aim of this study is to analysis factors that determine the competitiveness of container ports using the KJ and AHP methods. For this, 54 detailed attributing factors were identified both by previous studies and port users. 24 attributing factors were identified by a group of port experts. also, These were grouped 18 detailed attributing factors into 6 attributing factors by a group of port experts using the KJ method. These were made into a model of hierarchical structure with 3 levels, taking 1 goal factor, 6 evaluation factors and 18 detailed evaluation factors. The collected date of questionnaires were analyzed by a group of port experts using the AHP method. The analysis result of the evaluation factors in container port shows that port cargo volume is the most important factor, followed by port location, port cost, port service, port facility and port management. The analysis results of detailed evaluation factors in container port shows that import and export cargo volume is the most important factor, followed by transshipment cargo volume, distance from main trunk, cargo handling cost, distance from the point of importing and exporting, speediness of cargo handling, stability of cargo handling, vessel/cargo cost in port entry and leaving, punctuality in port entry and leaving, number and length of berth, collateral service cost, terminal area, hinterland accessibility, ability of terminal operation company, front depth of berth, etc.

• Journal of Information Technology Applications and Management
• /
• v.16 no.4
• /
• pp.205-222
• /
• 2009

Considering time-lag in the performance evaluation of information system (IS) investment is important because its effect reveals after certain period of time passed. Particularly it is more in the systems of e-government informatization projects which the amount of investment and the scale of business are huge. Many methods to solve this issue have been proposed such as system dynamics methods, simulations, structural equations etc. However, it is still difficult and unsolved problem because collecting practical data for time-lag analysis is very hard. In this paper, we analyze IS time-lag effect through factor analysis using the accumulated practical operational DB data. For the performance evaluation of the G4C system, the representative e-government web portal, we selected eleven factors reflecting time passing in G4C DB data. With these factors this paper conduct time-lag analysis in four view points. First, we conducted 'Stabilizing of G4C system' and got a result that IS is needed about three years for the stabilization. Second, we conducted 'Utilization of G4C system' and got a result that the utilization reaches appropriate level after in three years later after the introduction of G4C system. Third, we conducted 'Cost reduction effect' and got a result that cost reduction is stable in the third year after the introduction of G4C system. Lastly, we conducted 'System maturity effect' and got a result that the system reaches to the quality level that users expect after third to fourth years. According to the results of this research, we found that performance of IS improv continuously not immediately, and it needs three or four years of time-lag.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.14 no.4
• /
• pp.127-137
• /
• 2012

The purpose of this study is to recognize the differences of visual evaluation by variations in width of hem line and waistline position of the flare pants. The stimuli are 9 samples: One control group, 3 variations of the width of hem line and 3 variations of the waistline position. The data has been obtained from 44 fashion students. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: The visual evaluation by the width of hem line and waistline position of flare pants are composed of 5 factors : physical characteristics, elegance, originality, comfort, and stiffness. Among these factors, the physical characteristic is evaluated to be the most important factor. As a v isual evaluation result o f changes in the width o f hern l ine, 8 4 cm in width (the narrowest width) was highly evaluated in physical characteristics, elegance, and originality factors. For the result of changes in the waistline position, high-waisted flare pants were highly effective in physical characteristics, and also evaluated well in elegance, originality and stiffness factors. The flare pants did not show any interaction between the width of hem line and waistline position. The waistline position had more influence on visual evaluation in physical characteristics, originality and comfort factors while elegance and stiffness factors were affected by the width of hem line.