• Journal of Industrial Technology
• /
• v.24 no.A
• /
• pp.23-28
• /
• 2004

Seat is one of the most important part of an automobile for passenger's safety especially when an accident happens. A recliner is a part of the seat assembly, having the function of adjusting the back-plate angle of a seat. Recently, many kinds of vehicles have adopted the round recliner module rather than the conventional types of recliners because of its broad compatibility and structural simplicity. In this study a two-dimensional finite element strength analysis has been performed using a commercial code ABAQUS/Standard for the purpose of developing a new round recliner model. The loading condition for the analysis is the same as the FMVSS 301 regulation. The finite element result for the round recliner has been compared with that for the conventional type.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.767-772
• /
• 2002

Free-field ground motion during earthquake is significantly affected by the local site conditions and it is essential in the seismic design to perform the accurate site-specific ground response analysis. In this paper, one-dimensional seismic characteristics of waste landfill are studied based on the vertical propagation of horizontal shear waves through the column of soil/waste. Seismic response analysis is peformed for short-period, long-period and artificial earthquake ground motions using a computer program for seismic response analysis of horizontally layered soil deposits. The computed peak ground accelerations are compared with the values calculated according to Korean seismic design guidelines. The analysis result shows that the long-period earthquake causes the largest peak ground acceleration while the artificial earthquake results in the smallest one.

• Journal of the Korea Institute of Building Construction
• /
• v.3 no.4
• /
• pp.129-134
• /
• 2003

The purpose of this study is to evaluate efficiency by the Life Cycle Cost(LCC) analysis of floor covering materials for remodeling. This study has been performed as a case study. The LCC analysis is a technique which takes account into both initial-future costs and benefits of an investment over some period of time. LCC is important in commercial decision making because it provides improved assessment of the living-term cost effectiveness of construction projects as well as alternative economic methods that focus on initial costs. For LCC analysis and comparison, the present value technique is used. The results of this study are summarized as follows; (1) A LCC analysis model of floor covering materials is suggested through a case study (2) As a result of LCC case study, the type of sheet is analysed more economical than that of tile in floor covering materials.

• Journal of Fashion Business
• /
• v.24 no.6
• /
• pp.120-134
• /
• 2020

Recently, the beauty industry has implemented personalized services based on skin big data. To increase competitiveness in the beauty industry, systematic data measurement and evaluation indicators are necessary to select data and obtain necessary knowledge. In response, this study sought to stably enhance the accuracy of skin diagnosis based on satisfaction and reliability. To this end, the research was conducted through focus group interviews (FGI), a case study of brands, and analysis of prior research results. In particular, as a result of analyzing keywords that classify skin types by brand, common survey items for skin types were oiliness and using moisturizer, cosmetic use and vascular of skin, external stimulus and blemish & freckles, facial wrinkle, outside activities, self-consciousness, and smoke. In additioin to the common questions of the preceding study and the brand survey items, the questions concerning complex skin types, seasonal change, facial color, wrinkles and elasticity were added, and the questions were presented in a total of 40 items. In particular, it suggested that skin measurement could be conducted by focusing on elasticity and pigmentation items by reflecting the results of prior research and the opinions of FGI, and based on this, a customized service with high satisfaction and high accuracy of beauty care based on this could be proposed. We hope that this study will facilitate active self-care by providing more satisfying skin stones and personalized cosmetics proposals, thus laying the foundation for the further development of the cosmetics industry.

• Journal of Korean Society of Rural Planning
• /
• v.18 no.4
• /
• pp.13-26
• /
• 2012

The purpose of this study is to select the study area, which will be formed into Daegu Science Park as an national industrial complex, and to assess the landscape value based on biotop classification with different polygon forms, and to develop and computerize Biotop Value Assessment Tool (B-VAT) based on GIS. The result is as follows. First, according to the result of biotop classification based on an advanced analysis on preliminary data, a field study, and a literature review, total 13 biotop groups such as forrest biotop groups and total 63 biotop types were classified. Second, based on the advanced research on landscape value assessment model of biotop, we development biotop value assessment tool by using visual basic programming language on the ArcGIS. The first application result with B-VAT showed that the first grade was classified into 19 types including riverside forest(BE), the second grade 12 types including artificial plantation(ED), and the third class, the fourth grade, and the fifth grade 12 types, 2 types, and 18 types respectively. Also, according to the second evaluation result with above results, we divided a total number of 31 areas and 34 areas, which had special meaning for landscape conservation(1a, 1b) and which had meaning for landscape conservation(2a, 2b, 2c). As such, biotop type classification and an landscape value evaluation, both of which were suggested from the result of the study, will help to scientifically understand a landscape value for a target land before undertaking reckless development. And it will serve to provide important preliminary data aimed to overcome damaged landscape due to developed and to manage a landscape planning in the future. In particular, we expect that B-VAT based on GIS will help overcome the limitations of applicability for of current value evaluation models, which are based on complicated algorithms, and will be a great contribution to an increase in convenience and popularity. In addition, this will save time and improve the accuracy for hand-counting. However, this study limited to aesthetic-visual part in biotop assessment. Therefore, it is certain that in the future research comprehensive assessment should be conducted with conservation and recreation view.

• Journal of Korean Society of Water and Wastewater
• /
• v.29 no.4
• /
• pp.519-531
• /
• 2015

It has been widely accepted that the pressure management of water distribution systems using pressure reducing valves(PRVs) would be an effective method for controlling leakages. A pressure reducing valve (PRV) regulates outlet pressure regardless of fluctuating flow and varying inlet pressure, thereby reducing leakage and mitigating the stress on the water distribution system. However, the operation of a PRV is vulnerable to its mechanical condition and hydraulic operability. In this research, the effect of PRVs installed in water distribution system are evaluated in terms of hydraulic pressure reduction and mechanical performance by analyzing measured pressure data with statistical approach. A statistical approach using the moving average filter and frequency analysis based on fourier transform is presented to detect abnormally operated PRVs that have been densely installed in water distribution system. The result shows that the proposed approach can be a good performance evaluation method by simply measuring pressures for the PRVs.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.525-530
• /
• 2013

With the increasing the importance of emotional quality of vehicle, the sound quality of systems with electric motor components has become increasingly important. Electric motors are used for windows, seats, sun roof, mirrors, steering columns, windshield wiper, climate control blowers, etc. In this paper, a study was conducted to identify sound quality factors that contribute to customer's satisfaction and preference of the window lift system. Jury test for subjective evaluation was carried out and sound quality index was developed. Averaged sound pressure level and sharpness were significant factors when glass moves down. Also, maximum loudness at stop section and averaged loudness were significant factor when glass moves up. Noise source identification was carried out for the reduced the loudness and sharpness during glass transferred section and impulsive noise at stop section, Using the source identification result, several improvement points were applied. And finally, the degree of sound quality improvement was judged using sound quality index.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.24 no.6
• /
• pp.97-107
• /
• 2021

Abnormal climate caused by climate change causes enormous social and economic damage. And such damage and its impact may vary depending on the location and regional characteristics of the region and the social and economic conditions of local residents. Therefore, it is necessary to continuously monitor whether there are indicators that are weaker than other regions among the detailed indicators that constitute the risk, exposure and vulnerability of climate change risk. In this study, the concept of climate change risk was used for heatwave to determine regional inequality of climate change risk. In other words, it was judged that inequality in climate change risk occurred in regions with high risk but high exposure and low vulnerability compared to other regions. As a result of the analysis, it was found that 13 local governments in Korea experienced regional inequality in climate change risk. In order to resolve regional inequality in climate change risks, the current status of regional inequality in climate change should be checked based on the analysis proposed in this study, there is a need for an evaluation and monitoring system that can provide appropriate feedback on areas where inequality has occurred. This continuous evaluation and monitoring-based feedback system is expected to be of great help in resolving regional inequality in climate change risks.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.4
• /
• pp.21-30
• /
• 2022

To mitigate the environmental impacts of the energy sector, the government of South Korea has made a continuous effort to facilitate the development and commercialization of renewable energy. As a result, the efficiency of renewable energy plants is not a consideration in the potential site selection process. To contribute to the overall sustainability of this increasingly important sector, this study utilizes the Black-Scholes model to evaluate the economic value of potential sites for off-site wind farms, while analyzing the environmental mitigation of these potential sites in terms of carbon emission reduction. In order to incorporate the importance of flexibility and uncertainty factors in the evaluation process, this study has developed a site evaluation model focused on system dynamics and real option approaches that compares the expected revenue and expected cost during the life cycle of off-site wind farm sites. Using sensitivity analysis, this study further investigates two uncertainty factors (namely, investment cost and wind energy production) on the economic value and carbon emission reduction of potential wind farm locations.

• New & Renewable Energy
• /
• v.20 no.1
• /
• pp.61-69
• /
• 2024

This study investigates the barriers to the deployment of solar thermal and ground source heat pump (GSHP) from the perspective of consumers and businesses, as well as evaluates priorities for improving the barriers via expert AHP evaluation. From a consumer's perspective, the overall satisfaction with solar thermal is significantly lower than that with PV and needs to be improved at the installation and use stages. GSHP needs to be improved at the prior-information search stage. From a business perspective, the non-distinction between heat and electricity in mandatory installations in public buildings, the difficulty in assessing the value of heat, and high initial costs impede the deployment. Based on the result of AHP analysis, the priorities for improving the barriers to the wide utilization of solar thermal are evaluated in the order of economic feasibility, policy, acceptability, and technology, where high installation cost is shown to be the greatest barrier. Barriers for GSHP are evaluated in the order of policy, acceptability, economic feasibility, and technology, where policy means improvement is evaluated as the most important factor in promoting the deployment of GSHP.