• Analytical Science and Technology
• /
• v.19 no.4
• /
• pp.333-341
• /
• 2006

PVP-protected Ag, Pd and $Pt_{50}-Ru_{50}$ colloids were prepared independently by using ${\gamma}$-irradiation and electron beam (EB) at ambient temperature. UV-visible spectra of these colloids show the characteristic bands of surface resonance and give evidence for the formation of nanoparticles. Transmission electron microscopy (TEM) experiments were used to know the morphology of nanoparticles prepared by ${\gamma}$-irradiation and EB. The size of Ag, Pd, and $Pt_{50}-Ru_{50}$ nanoparticles prepared by ${\gamma}$-irradiation was ca. 13, 2-3, 15 nm, respectively. While, the size of Ag, Pd, and $Pt_{50}-Ru_{50}$ nanoparticles prepared by EB was ca. 10, 6, and 1-3 nm, respectively. Cyclic voltamograms (CV) were recorded for the Au electrodes immobilized with these nanoparticles. CVs indicated the modifications in the surface as a result of immobilization.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.28 no.6
• /
• pp.627-636
• /
• 2010

Image segmentation technique is becoming increasingly important in the field of remote sensing image analysis in areas such as object oriented image classification to extract object regions of interest within images. This paper presents a new method for image segmentation to consider spectral and spatial information of high resolution satellite image. Firstly, the initial seeds were automatically selected using local variation of multi-spectral edge information. After automatic selection of significant seeds, a segmentation was achieved by applying MSRG which determines the priority of region growing using information drawn from similarity between the extracted each seed and its neighboring points. In order to evaluate the performance of the proposed method, the results obtained using the proposed method were compared with the results obtained using conventional region growing and watershed method. The quantitative comparison was done using the unsupervised objective evaluation method and the object-based classification result. Experimental results demonstrated that the proposed method has good potential for application in the object-based analysis of high resolution satellite images.

• Journal of Aerospace System Engineering
• /
• v.17 no.5
• /
• pp.19-27
• /
• 2023

In this study, we used finite element analysis to conduct a containment capability evaluation of a turbine case. When analyzing the impact behavior of structures subjected to impact loads, it is important to consider the strain rate, as it affects the increase in flow stress. Therefore, we applied three material models (Cowper-Symonds, Johnson-Cook, and Modified Johnson-Cook) for the impact analysis. To validate these material models, we performed an impact test on an aluminum 6061 plate. By comparing and analyzing the experimental and analytical results, we determined that the Modified Johnson-Cook material model exhibited the least error. As a result, we applied this material model to evaluate the containment capability of the turbine case. This evaluation involved determining the occurrence of penetration, as well as the stress and strain induced at the collision area due to the initial velocity of the blade.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.21 no.4
• /
• pp.75-86
• /
• 2018

This research was thereby made to study and analysis ecological, landscape, and stability qualities of roadside cut Slopes in expressways and national highways that went through revegetation works. Also, evaluation items and framework for integrated assessment of plant structure and restored state for the maintenance were suggested. Following is the summary of the result. firstly, for stabilization of introduced native plant species on roadside cut slops, assessment on the post-project environmental management through long-term monitoring and maintenance works must be made. It signifies a form of authentic recovery and restoration by the native plants. second, current evaluation framework on the test beds is well managed with clear evaluation standards and table while its method of assessing the post management with only test bed results lacks conformity with this study site. Newly developed evaluation framework on the post construction sites is estimated to be used as assessment standards on any roadside construction sites. Third, after site investigation distinction was observed among different revegetating construction types in the long-term perspective. Due to the different duration time of vegetation state between seed-spray measures(degraded in time) and layer-spray measure(maintained), the use of coarse straw-mat mulching work or Coir net was suggested in long term maintenance of cut slopes. forth, segmentation of post environmental assessment is organized into three large categories of "ecological", "stabile", and "landscape" qualities regarding post restoration quality and stability of slope through native plants with which categories marks 50, 30, 20 points of rates. fifth, components of the post environmental assessment were segmented in twelve categories driving results from former experimental construction and newly focused items on site. In the future, it is possible to propose a customized assessment method considering the location and location of construction work if the research on the application of post-environment assessment methods for road construction surface recording is conducted systematically.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.151-157
• /
• 2022

In this paper, the performance of various blockchain consensus algorithms was compared and analyzed as a method to increase the transaction cost and processing time during NFT transactions and to increase the transaction stability requirements that occur during smart contract execution. Network reliability and TPS are evaluation items for performance comparison. TPS and the stability of the Consensus algorithm are presented for three evaluation items. In order to establish a standardized expression for each evaluation item, the reliability of the node and the success rate of the smart contract were considered as variables in the calculation formula, and the performance of the consensus algorithm of the three groups, PoW/PoS, Paxos/Raft and PBFT, was compared under the same conditions. / analyzed. As a result of the performance evaluation, the network reliability of the three groups was similar, and in the case of the remaining two evaluation items, it was analyzed that the PBFT consensus algorithm was superior to other consensus algorithms. Through the performance evaluation equations and results of this study, it was analyzed that when the PBFT consensus processing process is reflected in the consensus process, the network reliability can be guaranteed and the stability and economic efficiency of the consensus algorithm can be increased.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.467-470
• /
• 2005

There are about 10 motors for tile actuator of the automation system in an auto-mobile recently. The performance of the motor-case is much related to the noise and the vibration of an auto-mobile Multi-Forming process is so much the better than existing deep-drawing or Multi-step forming by press by less cost, installation and staff. But there isn't the specific and general process design, so we aren't good at competition. So in the first step, I want to study about the core design for the multi-forming process. We can access by the elasto-plastic theory and the finite element method, and we use a commercial package of the Deform-2D and, Deform-3D which is based on three-dimensional elasto-plastic finite element, evaluated propriety oi the package. The evaluation of the package propriety was simulated by simple bending example. It was found the elasto-plastic theory was mostly in agreement with the simulation. We proposed that three type of section for the core and analyzed by finite element method (Deform-2D). We can get the best result with the ellipse type core. Then we apply the result of the preceding analysis to the finite element method (Deform-3D). In 3D-finite element analysis, we can get the result of 8/100mm-roundness. This result can help the improvement of the multi-forming process.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.1
• /
• pp.10-18
• /
• 2011

Ergonomic product design considering users' natural use motion is of importance to improve the usability and satisfaction of a product. A five-step process of product design was developed in the present study by measuring and analyzing users' natural product-use motion with a motion capture system. The developed process was applied to ergonomic design improvement of a half guard installation part of refrigerator; new guard designs (diagonal and arc shape) were developed with the process and evaluated in terms of validity during the development as two measures (task satisfaction and similarity of natural motion). According to the evaluation result, the satisfaction at putting in- and out-task of new guard designs ($6.3{\pm}0.5$ points) was significantly higher than that of existing guard designs ($3.3{\pm}1.0$ points); the difference between natural motion and product-use motion in new guard designs ($1.0{\pm}0.3cm$) was significantly less than that of existing guard designs ($2.0{\pm}0.2cm$). The proposed process of natural motion analysis and product design is applicable to ergonomic product design and evaluation.

• The Korean Journal of Food And Nutrition
• /
• v.12 no.2
• /
• pp.156-163
• /
• 1999

This study was evaluate of chemical properties. textural charact6eristics and sensory properties prod-uced peach pyuns through the change of gelling agents such as mungbean starch potato starchy and pec-tin and of sugar density with 10%, 20%, and 30%. Sensory evaluation was that peach pyun added mun-gbean starch was more preferable in appearance and texture than peach pyun added potato starch. Peac-h pyun added 0% pectin was more preferable than peach pyun with 1% pectin. As a result of texture analysis the texture of peach pyun added mungbean starch was denser than that added potato starch. Adding 1% pectin to peach pyun increased mechanical properties such as hardness and chewiness. Mun-gbeaan starch pyun with pectin on lightness Potato starch pyun with pectin on redness and potato star-ch pyun with pectin on yellowness were significant(p<001). Lightness has a tendency to decrease with increasing sugar density. Adding 1% pectin has the effect to increase lightness redness and yellowness. The subject parameters that effect overall quality on sensory evaluation were found taste quality tex-ture quality hardness adhesiveness and taste by using regression analysis.

• Journal of information and communication convergence engineering
• /
• v.7 no.1
• /
• pp.7-12
• /
• 2009

The advanced computer network and Internet technology enables connectivity of computers through an open network environment. Despite the growing numbers of security threats to networks, most intrusion detection identifies security attacks mainly by detecting misuse using a set of rules based on past hacking patterns. This pattern matching has a high rate of false positives and can not detect new hacking patterns, making it vulnerable to previously unidentified attack patterns and variations in attack and increasing false negatives. Intrusion detection and prevention technologies are thus required. We proposed a network based hybrid Probe Intrusion Detection model using Fuzzy cognitive maps (PIDuF) that detects intrusion by DoS (DDoS and PDoS) attack detection using packet analysis. A DoS attack typically appears as a probe and SYN flooding attack. SYN flooding using FCM model captures and analyzes packet information to detect SYN flooding attacks. Using the result of decision module analysis, which used FCM, the decision module measures the degree of danger of the DoS and trains the response module to deal with attacks. For the performance evaluation, the "IDS Evaluation Data Set" created by MIT was used. From the simulation we obtained the max-average true positive rate of 97.064% and the max-average false negative rate of 2.936%. The true positive error rate of the PIDuF is similar to that of Bernhard's true positive error rate.

• Korean Institute of Interior Design Journal
• /
• v.23 no.6
• /
• pp.221-229
• /
• 2014

In elderly housing facilities where are elderly living facilities, the importance of outdoor space for psychological healing and stability, health improvement and environmental improvement is increasing, since elderly people suffer from depression and are hostile to these facilities. This study aims to identify if outdoor spaces in elderly housing facilities in Seoul have environments appropriate for the elderly and to suggest problems and improvements. For achieving this purpose, nine elderly housing facilities in Seoul were chosen and a field survey was conducted targeting five facilities with outdoor spaces. Based on the previous studies, the concepts of elderly housing facility and outdoor space were organized. Then, a checklist was drawn up as a framework of analysis for evaluating the present state of outdoor spaces of elderly housing facilities and space planning, and improvements were explored. It was found that elderly housing facilities in Seoul had good connectivity and accessibility to the surrounding areas, but there were few supporting facilities, except for resting places. Also, the result of analysis of the present state showed that most elderly housing facilities were located in high lands and the safety of elderly people was being threatened while moving, due to the absence of handrails. In conclusion, it is considered that outdoor space of elderly housing facility should be planned in consideration of safety, affordance and cognition out of the standards of researcher's evaluation tool.