• Journal of Conservation Science
• /
• v.30 no.1
• /
• pp.103-109
• /
• 2014

This study aimed to develop materials to compensate for problems of restoration for lost parts and material problems in the conservation treatment. First, there are several problems with existing materials as follows: secondary damage due to the high shrinkage rate and low adhesive strength, sense of difference due to the severe yellowing, remelting due to irreversibility of materials, processability due to the high strength, sag due to the prolonged setting time in the work process and surface contamination of artifacts due to tools or gloves. In order to solve these problems, this study set developmental goals after understanding the types and physical properties based on epoxy resin among the currently used restoration materials of pottery and earthenware. The developed epoxy resin is epoxy putty, which is cured within 5 minutes, for earthenware restoration. In the earthenware restoration method, the epoxy putty enhanced the workability by quickly curing in paste form and compensated disadvantages such as surface contamination. In addition, the use of white micro-balloon for the epoxy stock solution made coloring easier and weight lighter, and a restoration material with low shrinkage and superior processability was developed.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.306-314
• /
• 2020

The use of synthetic resins in ceramic restoration poses several challenges, including aging and potential damage to artifacts, which has raised the need to investigate new materials and restoration methods. This study set out to incorporate full color 3D printing into the 3D digital technology-based restoration method, an emerging approach currently being researched, and to print out missing parts with color information. After examining material physical properties with an experiment, the investigator printed out missing parts from a white porcelain vessel and grayish-blue-powdered celadon plate and compared them in chromaticity and brilliance. The experimental results show that the outputs had comparable tensile strength to the original restoration materials, whereas the recorded compressive strength was approximately 1.4~2 times higher than that of the original restoration materials. According to the NIST table of color difference values, the white porcelain vessel was visible at ΔE^*ab 1.55, and the grayish-blue-powdered celadon plate was perceivable at 3.34. Even though it was impossible to express the colors accurately owing to printer limitations, this non-contact approach reduced the possibility of damage to the minimum. In conclusion, it can be applied to objects with a high chance of damage or generate display effects through purposeful color differentiation in missing parts.

• Journal of Conservation Science
• /
• v.36 no.6
• /
• pp.494-504
• /
• 2020

Ten historic sites (denoted as A- J in this study) of a tomb were found during the construction of the east-west expressway in District 2 of Hyangnam, Hwaseong, which is implemented by the Gyeonggi-do headquarters of the Korea Land & Housing Corporation. Thetombswere first detected at siteH, and further investigations revealed various tombs from the Three Kingdoms period; artifacts such as gilt-bronze shoes and caps were excavated from wooden coffins in the tombs. The pottery examined in this study was the only pottery artifact excavated from the site. Its raw clay was soft and loose, reddish brown, and had quartz and feldspar particles of < 1 mm, which appeared to have been added as reinforcing agents. The firing temperature of the pottery was estimated to be under 800-870 ℃ as the mica remains and tridimite, which is the phase transition mineral of quartz, was not produced; a slight endothermic peak was also detected because of the hydration of sericite at 800 ℃. The condition of the artifact was severely weakened because of various factors, such as soil pressure from the stratum formed over the site and repeated freezing and thawing. The artifact could not be collected alone, and thus, surrounding soil that had attached to the artifact was also collected; the artifact was transported to the laboratory and conservation treatment was conducted in a safe and systematic manner.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.3
• /
• pp.158-171
• /
• 2023

Pottery filled with organic materials was excavated from the G-2 building site of Yongjangseong Fortress, Jingo, a relic of the Goryeo Dynasty. In this study, the characteristics of organic material were confirmed by a scientific analysis of organic material in pottery found at the palace in Yongjangseong, Jindo. In addition, it was intended to review the analysis method to identify the natural resin and to secure characteristic components(biomarkers) for each natural resin and use them as basic data in the future. The organic materials in the pottery were analyzed using attenuated total reflectance Fourier-transformed infrared spectroscopy(ATR-FTIR) and gas chromatography mass spectrometry(GC-MS). The infrared spectral characteristics were estimated to be natural resin, and biomarkers of organic materials were identified as sesquiterpene-based compounds(C₁₅H₂₄, MW 204) and derivatives. The lacquer(T.vemicifluum) is composed mainly of alkenes, alkanes, and catechol. Pine resin(P.densiflora), on the other hand, is primarily composed of diterpenoid(abietic acid, pimaric acid) and Whangchil(yellow lacquer) is identified to have sesquiterpenes(such as selinene, muurolene, calamenene) as its main components. So, the organic material in the pottery can be identified as Whangchil by comparing their compounds with modern resin materials from Dendropanax. morbifera that correspond with the results. Whangchil, which is exuded from the Dendropanax. morbifera, has been used as a natural coating materials since ancient times, and it has been confirmed that the characteristic components are well preserved even 700 years later. It can be assumed that the interior Whangchil was stored not for use as a coating, but rather for ritual purposes when the building was constructed, because the pottery was found near the cornerstone. Furthermore, based on simplified sample preparation using pyrolysis-gas chromatography mass spectrometry(Py-GC-MS), the thermal decomposition products were found to be similar to the characteristic components, suggesting that this method can be applied to the identification of natural resins used in historic artifacts.