• Journal of the Korean Data and Information Science Society
• /
• 제17권4호
• /
• pp.1129-1139
• /
• 2006

Pearson's correlation coefficient and vector similarity are generally applied to The users' similarity weight of user based recommender system. This study is needed to find that the correlation coefficient of similarity weight is effected by the number of pair response and significance probability. From the classified correlation coefficient by the significance probability test on the correlation coefficient and pair of response, the change of MAE is studied by comparing the predicted precision of the two. The results are experimentally related with the change of MAE from the significant correlation coefficient and the number of pair response.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.90-96
• /
• 2016

This study proposes a dynamic reliability analysis of control system as a method of quantitative evaluation of its performance in probabilistic terms. In this dynamic reliability analysis, the failure event is defined as an event that the dynamic response of the structural system exceeds a displacement limit, whereas the conventional reliability analysis method has limitations that do not properly assess the actual time history response of the structure subjected to dynamic loads, such as earthquakes and high winds, by taking the static response into account in the failure event. In this first paper, we discuss the control effect of the viscous damper on the seismic performance of the member-level failure where the failure event of the structural member consists of the union set of time-sequential member failures during the earthquake excitations and the failure probability of the earthquake-excited structural member is computed using system reliability approach to consider the statistical dependence of member failures between the subsequent time points. Numerical results demonstrate that the proposed approach can present a reliable assessment of the control performance of the viscous damper system in comparison with MCS method. The most important advantage of the proposed approach can provide us more accurate estimate of failure probability of the structural control system by using the actual time-history responses obtained by dynamic response analysis.

• Journal of the Korean Data and Information Science Society
• /
• 제25권1호
• /
• pp.263-269
• /
• 2014

When the loss of samples appears under repeated surveys, new samples can often replace missing values. Estimators using response probability can be considered under repeated surveys on two occasions where new samples are selected instead of missing data on the second occasion. We propose a new estimator that uses both respondents and new samples on the second occasion. It is considered for the simulation setting that missing values can happen at the second occasion and are replaced by new samples. We can see that the proposed estimator is more efficient than that using a weighting adjustment method for respondents at the second occasion.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제2권3호
• /
• pp.119-126
• /
• 2010

The response of ship roll oscillation under random ice impulsive loads modeled by Poisson arrival process is very important in studying the safety of ships navigation in cold regions. Under both external and parametric random excitations the evolution of the probability density function of roll motion is evaluated using the path integral (PI) approach. The PI method relies on the Chapman-Kolmogorov equation, which governs the response transition probability density functions at two close intervals of time. Once the response probability density function at an early close time is specified, its value at later close time can be evaluated. The PI method is first demonstrated via simple dynamical models and then applied for ship roll dynamics under random impulsive white noise excitation.

• Structural Engineering and Mechanics
• /
• 제18권3호
• /
• pp.343-362
• /
• 2004

Rocking response of rigid bodies with rectangular footprint, freely standing on horizontal rigid plane is studied analytically. Bodies are subjected to simulated single component of horizontal earthquakes. The effect of baseline correction, applied to simulated excitations, on the rocking response is first examined. The sensitiveness of rocking motion to the details of earthquakes and geometric properties of rigid bodies is investigated. Due to the demonstrated sensitivity of rocking response to these factors, prediction of rocking stability must be made in the framework of probability theory. Therefore, using a large number of simulated earthquakes, the effects of duration and shape of intensity function of simulated earthquakes on overturning probability of rigid bodies are studied. In the case when a rigid body is placed on any floor of a building, the corresponding probability is compared to that of a body placed on the ground. For this purpose, several shear frames are employed. Finally, the viability of the energy balance equation, which was introduced by Housner in 1963 and widely used by nuclear power industry to estimate the rocking stability of bodies, is evaluated. It is found that the equation is robust. Examples are also given to show how this equation can be used.

• Composites Research
• /
• 제23권2호
• /
• pp.40-47
• /
• 2010

본 논문에서는 복합 반응면 기법을 제안하고 성능을 고찰하였다. 복합 반응면 기법은 MPP의 좌표를 기준으로 하여 근사모델을 반복 계산하는 기법이다. 성능을 검증하기 위해 비선형 함수와 복합재 적층판에 대하여 신뢰성 해석 기법을 적용하여 파괴확률, MPP(Most Probable failure Point), 신뢰도 지수를 계산하고 일반적인 반응면 기법의 결과와 비교하였다. 파괴확률은 비선형 한계상태식을 가정하고 임의의 파괴 기준을 정의하여 계산하였다. 제안한 복합 반응면 기법을 이용하여 파괴확률을 계산한 결과 일반적인 반응면 기법보다 향상된 성능을 나타내었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.275-282
• /
• 2006

System algorithms estimated by deterministic input may occur the error between predicted and actual output. Especially, actual system can't predict the exact outputs due to uncertainty and tolernce of input parameters. A single output to a set of inputs has a limited value without the variation. Hence, we should consider various scatters caused by the load assessment, material characteristics, stress analysis and manufacturing methods in order to perform the robust design or etimate the reliability of structure. The system design with uncertainty should perform the probabilistic structural optimization with the statistical response and the reliability. This method calculated the probability distributions of the characteristics such as stress by combining stress analysis, response surface methodology and Monte Carlo simulation and got the probabilistic sensitivity. The sensitivity of structural response with respect to in constant design variables was estimated by fracture probability. Therefore, this paper proposed the probabilistic reliability design method for fracture of uncorved freight end beam and the design criteria by fracture probability.

• Structural Engineering and Mechanics
• /
• 제57권1호
• /
• pp.21-43
• /
• 2016

A conditional probability based approach known as Particle Filter Method (PFM) is a powerful tool for system parameter identification. In this paper, PFM has been applied to identify the vehicle parameters based on response statistics of the bridge. The flexibility of vehicle model has been considered in the formulation of bridge-vehicle interaction dynamics. The random unevenness of bridge has been idealized as non homogeneous random process in space. The simulated response has been contaminated with artificial noise to reflect the field condition. The performance of the identification system has been examined for various measurement location, vehicle velocity, bridge surface roughness factor, noise level and assumption of prior probability density. Identified vehicle parameters are found reasonably accurate and reconstructed interactive force time history with identified parameters closely matches with the simulated results. The study also reveals that crude assumption of prior probability density function does not end up with an incorrect estimate of parameters except requiring longer time for the iterative process to converge.

• International Journal of Advanced Culture Technology
• /
• 제9권4호
• /
• pp.102-109
• /
• 2021

Since the 4th Industrial Revolution is implemented based on superintelligence, new insights must be provided through convergence studies with other fields to find optimal solutions to create new ideas. In this paper, we intende to present improvement measures for probability and statistical education, which is an athlete's subject on data analysis and processing in the ICT(Information & Communication Technologies) field in the era of superintelligence of the 4th industrial revolution. This paper aims to strengthen competitiveness through early development and commercialization of new technologies by presenting probabilities and statistical curriculums that require linkage in the ICT field. Second, it is necessary to present an educational system diagram linking probabilities and statistics in the ICT field to prepare a mid- to long-term response strategy for ICT education in response to innovative changes. Third, through a survey, we intend to present an effective educational operation plan linking probability and statistics to ICT major subjects by analyzing the perception of probability, statistical importance, and utilization of majors in this field.

• Structural Engineering and Mechanics
• /
• 제68권4호
• /
• pp.423-442
• /
• 2018

In this paper, masonry infilled reinforced concrete (RC) frames are analyzed through a probabilistic approach. A macro-modeling technique, based on an equivalent diagonal pin-jointed strut, has been resorted to for modelling the stiffening contribution of the masonry panels. Since it is quite difficult to decide which mechanical characteristics to assume for the diagonal struts in such simplified model, the strut width is here considered as a random variable, whose stochastic characterization stems from a wide set of empirical expressions proposed in the literature. The stochastic analysis of the masonry infilled RC frame is conducted via the Probabilistic Transformation Method by employing a set of space transformation laws of random vectors to determine the probability density function (PDF) of the system response in a direct manner. The knowledge of the PDF of a set of response indicators, including displacements, bending moments, shear forces, interstory drifts, opens an interesting discussion about the influence of the uncertainty of the masonry infills and the resulting implications in a design process.