• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1288-1293
• /
• 2009

This paper discusses about modeling method to simulate a nonlinear behavior like sliding or rocking of two stacked body system under earthquake condition. A double body system design can be an option to reduce seismic response of a component in comparison to a single body system for free standing structures. Therefore, according to the priority of components, the structure is to be designed by proper ratio of partition in their height for improvement of seismic capability and structural integrity. Nonlinear modeling and analysis using simple rigid body and dynamic system has been performed to check the trend in such cases. As a result, one of the two bodies can be chosen to reduce the seismic response from energy absorption of the other one by appropriate application of friction ratios not only in slip-slip condition but in slip-rock condition.

• 대한치과의사협회지
• /
• 제51권11호
• /
• pp.604-609
• /
• 2013

Crown fractures are relatively common trauma to anterior teeth, and should be restored immediately in most cases. For those who suffer from unfortunate traumatic episode, the best treatment option should be minimally invasive approach. In the presence of fractured tooth fragment, reattachment procedure creates positive emotional response in the patient and simplifies the procedure and maintenance of the patient's original tooth anatomy and occlusion. Without fractured tooth fragment, next conservative option could be direct composite restoration which is based on minimal invasion concept. This article proposes simple and very conservative techniques that anyone can do in daily practice.

• Advances in Computational Design
• /
• 제8권2호
• /
• pp.97-112
• /
• 2023

The Finite Element (FE) modeling of Reinforced Concrete (RC) under seismic loading has a sensitive impact in terms of getting good contribution compared to experimental results. Several idealized model types for simulating the nonlinear response have been developed based on the plasticity distribution alone the model. The Continuum Models are the most used category of modeling, to understand the seismic behavior of structural elements in terms of their components, cracking patterns, hysteretic response, and failure mechanisms. However, the material modeling, contact and nonlinear analysis strategy are highly complex due to the joint operation of concrete and steel. This paper presents a numerical simulation of a chosen RC column under monotonic and cyclic loading using the FE Abaqus, to assessthe hysteretic response and failure mechanisms in the RC columns, where the perfect bonding option is used for the contact between concrete and steel. While results of the numerical study under cyclic loading compared to experimental tests might be unsuccessful due to the lack of bond-slip modeling. The monotonic loading shows a good estimation of the envelope response and deformation components. In addition, this work further demonstrates the advantage and efficiency of the damage distributions since the obtained damage distributions fit the expected results.

• 인지과학
• /
• 제20권2호
• /
• pp.197-223
• /
• 2009

반응 조화설 (Shafir, 1993)은 결정에서 두 대안 중 한 대안의 특징들이 선택이나 거부의 반응과 조화될수록 사람들이 그 대안을 더 택한다고 주장한다. 장단점을 많이 가진 풍부한 대안이 그렇지 않은 보통의 대안보다 더 많이 선택되고 더 많이 거부되어야 한다. 유승민과 이영애(2001)는 이 가설의 예측과 일치하지 않은 결과를 얻었다. 본 연구는 두 대안의 특징들의 제시 방식 그리고 질문 순서를 변화시켜 반응 조화설을 검토하였다. 특징들을 나열하지 않고 문장으로 제시하고 선택 또는 거부 질문을 먼저 제시하였을 때 반응 조화설과의 예측과 상당히 일치하는 결과를 얻었다. 본 연구는 반응 조화설을 검토할 때 선호의 구성 방식이 중요함을 밝혔다. 본 연구의 결과를 최근 연구들과 비교하였다.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.291-297
• /
• 2010

A system called demand response programs (DRP) is being introduced among various countries owing to the lack of new generation capacity and the higher fuel generation cost. It is a program which provides for the end-users to select their consumption of electricity by recognizing the value of their consumption in real time. That is, Demand Response can be defined as the changes in electric usage by end-use customers from their normal consumption patterns in response to changes in the price of electricity or other signals. It is expected that the effects of DRP are preventing price spike, improving supply reliability and social welfare and increasing option of customers. Considering the customer's thermal comfort zone, this paper determines the most profitable combination of optimal incentives and amounts of load reduction for a retailer to maximize profits according to predicted outdoor temperatures while implementing DRP.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.707-712
• /
• 2006

Knowing the ground thermal conductivity is very importnat in designing ground heat exchangers. Knowledge of the ground soil and rock composition information dose not guarantee the prediction of accurate thermal information. In Situ testing of ground heat exchangers is becoming popular. However, in situ testing are performed at construction sites in real life. Adequate data collection and analysis are not easy mainly due to poor power quality. Power fluctuation also causes the fluctuation of received data. The power quality must be maintained during the entire in situ testing processes. To accurately analyse the test data, the understanding of the response of the power fluctuation is essential. Testing under the power quality varied by tester is very difficult. Analyzing power variation by numerical simulation is a realistic option. By varying power in a sinosuidal manner, its effects on predicting thermal conductivity from thermal response plots made from the test data are examined.

• Journal of Korean Neurosurgical Society
• /
• 제66권5호
• /
• pp.562-572
• /
• 2023

Objective : Bevacizumab is a feasible option for treating cerebral radiation necrosis (RN). We investigated the clinical outcome of RN after treatment with bevacizumab and factors related to the initial response and the sustained effect. Methods : Clinical data of 45 patients treated for symptomatic RN between September 2019 and February 2021 were retrospectively collected. Bevacizumab (7.5 mg/kg) was administered at 3-week intervals with a maximum four-cycle schedule. Changes in the lesions magnetic resonance image (MRI) scans were examined for the response evaluation. The subgroup analysis was performed based on the initial response and the long-term maintenance of the effect. Results : Of the 45 patients, 36 patients (80.0%) showed an initial response, and eight patients (17.8%) showed delayed worsening of the corresponding lesion. The non-responders showed a significantly higher incidence of diffusion restriction on MRI than the responders (100.0% vs. 25.0%, p<0.001). The delayed worsening group showed a significantly higher proportion of glioma pathology than the maintenance group (87.5% vs. 28.6%, p=0.005). Cumulative survival rates with sustained effect were significantly higher in the groups with non-glioma pathology (p=0.019) and the absence of diffusion restriction (p<0.001). Pathology of glioma and diffusion restriction in MRI were the independent risk factors for non-response or delayed worsening after initial response. Conclusion : The initial response of RN to bevacizumab was favorable, with improvement in four-fifths of the patients. However, a certain proportion of patients showed non-responsiveness or delayed exacerbations. Bevacizumab may be more effective in treating RN in patients with non-glioma pathology and without diffusion restriction in the MRI.

• Nuclear Medicine and Molecular Imaging
• /
• 제42권sup1호
• /
• pp.157-161
• /
• 2008

Malignant pleural mesothelioma (MPM) has a poor prognosis and a strong association with exposure to asbestos. Although there are not generally accepted guidelines for treatment of MPM, recent reports suggest that multi modality therapy combining chemotherapy, radiotherapy, and surgery can improve the survival of patients with MPM. Therefore exact staging is required to decide the best treatment option. However, it is well known that there are many difficulties in determining precise preoperative stage, predicting prognosis, and monitoring response to therapy with conventional imaging modalities such as CT and MRI in MPM. Recently PET with $^{18}F-FDG$ comes into the spotlight as an important staging method. There is increasing evidence that PET is superior to other conventional imaging modalities in diagnosis and staging of MPM. Particularly PET/CT improves the diagnostic and staging accuracy over PET or CT alone in MPM because it provides anatomic imaging data as well as functional information. PET and PET/CT are also useful for monitoring response to therapy and SUV is reported as a prognostic factor in MPM.

• Radiation Oncology Journal
• /
• 제38권2호
• /
• pp.148-150
• /
• 2020

Pleuropulmonary blastoma (PPB) is a rare intrathoracic neoplasm in children. Although surgery with or without chemotherapy mainly conducted, the response of radiotherapy (RT) has not been evaluated yet. For unresectable tumor, RT might be considered as one option to decrease tumor extent to relieve obstructing symptoms or to facilitate successive treatment. We report one child in whom PPB with DICER1 mutation recurred after surgery and lead to respiratory distress. She emergently received palliative RT with a relatively low dose (20 Gy), and symptoms sufficiently relieved. Even she showed an 84.3% reduction in diameter and maintained the remission status for 1 year. These might reflect possible radiosensitivity of PPB, and further investigations of RT might be necessary for unresectable PPB.

• Structural Engineering and Mechanics
• /
• 제35권4호
• /
• pp.479-491
• /
• 2010

Advances in geological studies, have identified increased seismic activity in the world's ocean once believed to be far from seismic hazards. The increase in demand of oil and other hydrocarbons leaves no option but to install a suitable offshore platform on these seismically sensitive offshore basins. Therefore, earthquake based design criteria for offshore structures are essential. The focus of the present review is on various computational techniques involved for seismic response study. The structural and load modeling approaches, the disturbed fluid-structure and soil-structure interaction as well as hydrodynamic damping due to earthquake excitation are also discussed. A brief description on the reliability-based seismic design approach is also presented.