• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.716-722
• /
• 2017

The present study numerically investigates the effect of obstacles located in the trajectory of fire plume flow on heat flow characteristics by using Fire Dynamics Simulation (FDS) software in an underground combined cycle power plant (CCPP). Fire size is taken as 10 MW and two different locations of fire source are selected depending on the presence of an obstacle. As the results, when the obstacle is in the trajectory of fire plume, hot plume arrives at the ceiling about 5 times slower in the upper of the fire in comparison to the results without obstacle. In addition, the average propagation time of ceiling jet increases by about 70 % with the distance from the ceiling in the upper of the fire, and it increases mainly about 4 times at the distance of 10 m. Consequently, it is noted that the analysis of heat flow characteristics in the underground CCPP considering fire scenarios is essential to develop the fire detection system for initial response on evacuation and disaster management.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.1
• /
• pp.49-60
• /
• 2017

As well as the strength check, fatigue life check is also mainly required for designing mooring lines of the floating structures. In general, forces which induce dynamic structural response significantly affect to fatigue design of the mooring lines. So, waves are mainly considered as the governing loading for fatigue design of the mooring lines. In this study, characteristics of the fatigue damage of the mooring lines for submerged floating tunnels (SFT) under irregular waves are investigated. For this study time domain hydrodynamic analysis is used to obtain motion of the tunnel and tension and stresses of the mooring lines under the specific environmental conditions. Also, the Rainflow-counting method, the Palmgren-Miner's rule, and S-N curves for floating offshore structures presented by DNV recommendation is applied to calculate the fatigue damage due to the fluctuating stresses. Referring to the design plactice of the tendon pipes for TLP (tension-leg platform), which is very similar structural system to SFT, it is assumed that a 100 year return period wave attacks the SFT systems during 48 hours and the fatigue damages due to the environmental loading are calculated. Following the analysis sequence, the effects of the tunnel draft, spacing and initial inclination angle of the mooring lines on the fatigue damage under the specific environmental loadings are investigated.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.3
• /
• pp.137-149
• /
• 2021

Cable-stayed bridges are infrastructure facilities of a highly public nature; therefore, it is essential to ensure operational safety and prompt response in the event of a collapse or damage caused by natural and social disasters. Among social disasters, impact accidents can occur in bridges when a vehicle collides with a pier or when crashes occur due to aircraft defects. In the case of offshore bridges, ship collisions will occur at the bottom of the pylon. In this research, a procedure to evaluate the structural behavior of a cable-stayed bridge for aircraft impact is suggested based on a numerical analysis approach, and the feasibility of the procedure is demonstrated by performing an example assessment. The suggested procedure includes 1) setting up suitable aircraft impact hazard scenarios, 2) structural modeling considering the complex behavior mechanisms of cable-stayed bridges, and 3) structural behavior evaluation of cable-stayed bridges using numerical impact simulation. It was observed that the scenario set in this study did not significantly affect the target bridge. However, if impact analysis is performed through various scenarios in the future, the load position and critical load level to cause serious damage to the bridge could be identified. The scenario-based assessment process employed in this study is expected to facilitate the evaluation of bridge structures under aircraft impact in both existing bridges and future designs.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.3
• /
• pp.151-171
• /
• 2023

This study analyzed farmer's responses to the pilot project in advance of the nationwide expansion of the farm-customized early warning service for weather risk management by conducting a survey among all farmers who received text messages of this service. We analyzed not only the satisfaction of farmers with the early warning service, but also the effectiveness of the service in preventing agrometeorological disasters through cross-tabulation analysis of survey results. More than 330 farmers participated in the survey, and more than 60% of the respondents said that they had prevented or mitigated crop disasters by using the early warning service. The cross-tabulation analysis showed that farmers who perceived the field-specific weather information of the early warning service to be more accurate than the weather forecast were statistically significantly more likely to prevent crop disasters than those who did not. According to our case study, farmers who grew open field fruit crops were particularly sensitive to weather information and confirmed that early warning services, along with disaster prevention facilities, were effective in preparing for freezing and frost injury that had been occurring frequently under the influence of climate change. This study is significant in that it is the first to systematically analyze the effectiveness of the farm-customized early warning service for weather risk management based on extensive surveys. It is expected to contribute to exploring ways to develop the service ahead of the nationwide expansion of the early warning service in the near future.

• Journal of the Korea Concrete Institute
• /
• v.28 no.5
• /
• pp.535-544
• /
• 2016

This paper aims at examining the effects of sustained load and elevated temperature on the time-dependent deformation of a carbon fiber reinforced polymer (CFRP) sheets bonded to concrete as well as the pull-off strength of single-lap shear specimens after the sustained loading period using digital images. Elevated temperature during the sustained loading period resulted in increased slip of the CFRP composites, whereas increased curing time of the polymer resin prior to the sustained loading period resulted in reduced slip. Pull-off tests conducted after sustained loading period showed that the presence of sustained load resulted in increased pull-off strength and interfacial fracture energy. This beneficial effect decreased with increased creep duration. Based on analysis of digital images, results on strain distributions and fracture surfaces indicated that stress relaxation of the epoxy occurred in the 30 mm closest to the loaded end of the CFRP composites during sustained loading, which increased the pull-off strength provided the failure locus remained mostly in the concrete. For longer sustained loading duration, the failure mode of concrete-CFRP bond region can change from a cohesive failure in the concrete to an interfacial failure along the concrete/epoxy interface, which diminished part of the strength increase due to the stress relaxation of the adhesive.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.5
• /
• pp.487-498
• /
• 2010

This article presents an effect of deicer such as $CaCl_2$(calcium chloride) and EFD(Eco-Friendly Deicer) composed by organic acids on the survival and growth of plant. Pine and bush clover which are main natural species on the road side, and young radish and kidney bean which are cultivation species used in this test that responses of survival and growth were analyzed as grade concentration of deicers. Bush clover showed the most sensitive survival response among 4 species to the deicer. Pine growth didn't have statistical significance as the kind of deicers and concentration variation, but growths of bush clover and kidney bean showed growth inhibition in concentration more than 3% of $CaCl_2$ and EFD1. The results of survival and growth for $CaCl_2$(calcium chloride) demonstrated that young radish and pine are tolerant species and bush clover and kidney bean are sensitive species. Although EFD1 manufactured by chemical showed the negative effect on the survival and growth of plants, EFD2 made with waste compost was confirmed that it has the positive influence to the survival and growth of the both sensitive and tolerant plant species for chloride.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.407-416
• /
• 2020

North Korea's demand for infrastructure construction and maintenance is growing rapidly. On the other hand, the number of skilled workers is insufficient. Therefore, through a survey of North Korean defectors, this study analyzed the status of construction technology and the difficulties of construction workers. In addition, an attempt was made to derive an appropriate education and training program process and operation plan. As a result of the survey, the reason for the low technical level of construction workers was the lack of skills, lack of motivation to work, and the lack of training and management systems. The appropriate education and training period was 56% of the total response within one year and 36% within six months. Based on the results of this survey, the period of education and training for the rapid training of construction technical personnel in North Korea was adopted as one year. Moreover, compared to the NCS standard in South Korea, appropriate training hours were suggested, excluding training courses, such as planning and design, construction management that require specialized knowledge. Finally, the curriculum corresponding to the education and training courses and the standards for facility names and required areas for facility operation were suggested.

• Fire Science and Engineering
• /
• v.31 no.6
• /
• pp.23-32
• /
• 2017

Foam block, popularized as the self-interior goods, is susceptible to fire since the main material is the polyethylene flammable synthetic resin. However, it is widely used in homes, offices, and multi-use facilities. In order to understand the fire characteristics of the foam block, two kinds of foam blocks sold in the market (non-fire retardant and fire retardant) were evaluated according to standard of KS F 5660-1 (Reaction to fire test). In addition, the hazard analysis of the gas generated by the combustion of the specimen was performed using the FTIR gas analyzer. The cone calorimeter test showed that the ignition and flame combustion of both two specimens were burned as soon as the radiant heat blocking device was removed, and it was confirmed that the flame could become a rapid propagation factor during the fire. The analysis of the combustion gas through the FTIR gas analyzer showed that both the carbon dioxide and carbon monoxide classified as the common combustion gases and the acrolein, ammonia, and hydrogen cyanide causing serious damage to the human body were detected substantially. This study showed that a foam block product has high ignitionability and generates toxic gases. Hence, it is urgently required to establish the standards used for properly classifying the combustion characteristics of the material on the basis of the use conditions of a foam block product and to prepare the standards on the purpose of use.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.8
• /
• pp.159-172
• /
• 2020

Social networking services (SNS) are developing significantly with the Internet and smartphones. It's a friendly social media, but if you think deeply about it, you'll find that it has a variety of faces. It is a communication tool between users, a medium for delivering information, an infrastructure for providing applications, and a community where people with common interests gather. In recent years, business tools, shopping and payment methods are also being swallowed. The influence of the spread of SNS on the real world is also expanding, and the work being dealt with from a sociological perspective is also increasing. Also, if you pay attention to the technical aspects of SNS, it is composed of various technical elements, such as infrastructure that handles large-scale access, user interface that supports comfortable use, and big data analysis to understand people's behavior more deeply. However, I usually use it as usual. However, if you look through SNS, you can see that the situation is surprisingly profound and multifaceted. This study began by looking at the history and current status of SNS and attempted to find its status through comparison with other media. From the point of view of relationship with society, it can be a risk and legal issue when using SNS, such as crimes using bad social media or social media. It is also necessary to comment on the activities on SNS or the guidelines established by the operators. Therefore, various legal issues on SNS will be discussed. Also, as an example of using SNS, I will introduce an example of using SNS in disaster response. From a more technical point of view, you will receive commentary on SNS's network-based technology and SNS's information use, and these articles will help you understand and use SNS safely and help you further utilize or develop SNS.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.21-30
• /
• 2011

In the global IT market, a lot of issues for responding to various environmental regulations emerged. In case of the data centers, it is consuming huge amounts of energy to maintain. So there have been various technical attempts as Consolidation, Virtualization, Optimization to efficiently manage energy and data storage to fix the problems. In this paper, we propose a new RAID(Redundant Array of Independent Disks) mechanism which is differing the intensity of power consumption and works to provide data protection and disaster recovery(backup, mirroring etc.) to stratify multiple volumes. G-RAID minimize the power consumption and the lower of I/O performance by selecting the volume depending on the frequency of data access while classifying the power consumption between volumes in storage system. Also, it is possible that a filesystem and block map information of G-RAID is processed by basic unit which is group located in a row for the blocks to work efficiently and can minimize the performance degradation of block mapping load by the access frequency in each groups. As a result, we obtained to elevate a little bit of response time caused by block relocation work, but showed the decrease of power consumption by 38%.