• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.78-86
• /
• 1999

The improvement of the water level control is important since it will prevent the steam generator trip so that improve the reliability and credibility of operation system. In this paper, the closed loop system identification is performed which can be used for the system monitoring and prediction of the system response. The model also can be used for the prediction control. Irving model is used as a steam generator model. The plant is an open loop unstable and non-minimum phase system. Fuzzy controller stabilize the system and the stable controller stabilize the system and the stable closed loop system is identified using neural networks. The obtained neural network model is validated using the untrained input and output. The results of computer simulation show the obtained Neural Network model represents the closed loop system well.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.201-208
• /
• 2004

Response characteristics of the CVT system for a parallel hybrid electric vehicle (HEV) are investigated. From the experiment, CVT ratio control algorithm for the optimal engine operation is obtained. To investigate the effect of the CVT system dynamic characteristics on the HEV performance, a hardware in the loop simulation (HILS) is performed. In the HILS, hardwares of the CVT belt-pulley and hydraulic control valves are used. It is found that the engine performance by the open loop CVT ratio control shows some deviation from the OOL in spite of the RCVs open loop control ability. To improve the engine performance, a closed loop control of the CVT ratio is proposed with variable control gains depending on the shift direction and the CVT speed ratio range by considering the nonlinear characteristics of the RCV and CVT belt-pulley dynamics. The HILS results show that the engine performance is improved by the closed loop control showing the operation trajectory close to the OOL.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권3호
• /
• pp.124-132
• /
• 2000

In this paper, presented are an active surface-micromachined silicon accelerometer, force rebalance loop using parametric robust control method, and experimental results with a real micromachined accelerometer. And finally, a robust controller of the form of PID compensator was designed to construct force rebalance loop. Through the frequency response analysis, it is shown that the loop guarantees appropriate stability and robustness. Experiments with a real accelerometer demonstrated that the proposed loop effectively controls the position of the accelerometer's proof mass. It also demonstrated that the resolution of the fabricated accelerometer is better than 1mg. Compared with a commercial accelerometer the proposed force rebalance silicon accelerometer showed better performances.

• 한국전자통신학회논문지
• /
• 제16권4호
• /
• pp.591-598
• /
• 2021

디지털 위상 고정 루프는 위상 동기화를 위해 사용되는 회로로 일반적으로 통신, 회로분야 등 다양한 분야에서 사용된다. 디지털 위상 고정 루프를 설계 시 상태추정기를 사용하는 경우 보통 칼만 필터와 같은 무한 임펄스 응답 상태추정기를 활용해왔다. 일반적으로 무한 임펄스 응답 상태추정기 기반 디지털 위상 고정 루프의 성능은 우수하지만, 초기값의 부정확, 모델 오차, 외란 등의 예상하지 못하는 상황에서 급격한 성능저하가 발생할 수 있다. 본 논문에서는 새로운 디지털 위상 고정 루프를 설계 하기 위해 최적의 측정값 구간 길이를 갖는 최소 공분산 유한 임펄스 응답 필터를 제안한다. 제안된 유한 임펄스 응답 필터의 중요 파라미터인 측정값 구간 길이를 구하기 위해 수치적 방법을 소개하며, 필터의 이득을 얻기 위해 비용함수로 오차의 공분산 행렬을 설정하고, 이를 최소화 하기 위하여 선형 행렬 부등식을 사용하였다. 제안된 디지털 위상 동기 루프의 우수성과 강인성을 검증하기 위해 노이즈 정보가 부정확한 상황에서 기존 방법과의 비교 및 분석을 위한 시뮬레이션을 수행하였다.

• 한국자동차공학회논문집
• /
• 제2권6호
• /
• pp.94-101
• /
• 1994

About vibration model of Six-degrees-of-freedom(DOF), in mass load, examined results for knowing dynamic interference and response variation is as follows; In case of putting mass load upon the object, experimented results on two-degrees-of-freedom of the translation-1 direction and the rotation-1 direction at open-loop-control system, about 0.19 arcsed in input of the translation-$0.1{\mu}m$ and $0.022{\mu}m$ on input of the rotation-0.5 arcsec, the justicse of motion equation is acknowledged as confirming the appearance of the interference-$0.022{\mu}m$. In establishing calculation of transformation matrix by using analogue circuit, as simulating results that used incomplete differentiation, interference is $1.7{\times}10^{-3}$ arcsec on input of the translation-$0.1{\mu}m$ and $1.4{\times}10^{4}{\mu}m$ on input of the rotation-0.5 arcsec in open-loop-control system. Also it is $4.2{\times}10^{-4}$ arcsec on input of the translation-$0.1{\mu}m$ and $5.6{\times}10^{-5}{\mu}m$ on input of the rotation-0.5 arcesc in closed-loop-control system. As closed-loop-control system is better than open-loop-control system, equivalent accordance is confirmed on original response. Finally, fundamental validity of this theory is acknowledged.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.489-494
• /
• 2003

Vibration localization characteristics of open loop repeated structures with mistuning are investigated in this paper. Mistuning of a periodic structure often creates significant non-uniformity in vibration responses. As a result of the localization, critical fatigue problems often occur in repeated structures. Therefore, it is of great importance to predict the vibration response of the mistuned repeated structures accurately. In this paper, a simplified model for the open-loop repeated structure is introduced and dimensionless parameters which influence the localization characteristics are identified. The effects of the parameters on the localization characteristics are investigated through numerical study.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.496-500
• /
• 2001

There are two ways in the output voltage control method in PWM inverter. One is the double loop voltage control composed of inner current control loop and outer voltage control loop. Because it shows fast response and low steady state error, utilized in many application. The Other is single loop voltage control method composed of voltage control loop only. It's characteristics shows lower performance in case of high output impedance than double loop voltage control. But in low output impedance, it shows good control performance in all load range than double loop control. In this paper, single loop voltage control rule and gain was developed analytically, and these were verified through computer simulation and experiment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.744-747
• /
• 2005

This research studied 6-Axes Articulated Robot Manipulator's gain Tuning in consideration of dynamic. First of all, search fur proportional gain of velocity control loop by dynamic signal analyzer. Proportional gain of velocity control loop is connected to dynamic signal analyzer. Next Select free Proportional Gain value. And Select amplitude X of sinusoidal properly so that enough Velocity Feedback Signal may be paid as there is no group to utensil department. Next step, We can get Bode Diagram of Closed loop transfer function response examination in interested frequency. Integral calculus for gain of velocity loop is depended on integral calculus correction's number. We can obtain open loop transfer function by integrator. And we can know bode diagram's special quality from calculated open loop transfer function. With this, Velocity Control Loop's Parameter as inner loop is controlled. Next In moving, when vibration occurs, it controls notch filter. And finally, we have to control fred-forward filter parameter for elevation of control performance.

• 전기학회논문지
• /
• 제57권6호
• /
• pp.1048-1057
• /
• 2008

This paper represents a design method for PID or low-order controllers cascaded with a linear plant in the unit feedback system where it is required to meet the given time response specifications such as overshoot and settling time. This problem is difficult to solve because the zeros of the controller appear in the numerator of the overall system and thus those zeros may make the time response design difficult. In this paper, we propose a new approach based on the partial model matching and the so called K-polynomial. The partial matching problem is formulated to an optimization problem in which a quadratic function of coefficient errors between a target model and the resulting closed loop system is minimized. For the sake of satisfying the closed loop stability, a set of quadratic constraints associated with the cost function is introduced. As a result, the controller designed meets both time response requirements and the closed loop stability, if any. It is shown through several examples that the present method can be easily applied to these problems.

• 전력전자학회논문지
• /
• 제14권2호
• /
• pp.134-141
• /
• 2009

전원사고로 인하여 야기되는 전원급변상황에서 위상각의 새로운 PLL 방법은 추종속도를 개선시키기 위하여 제안되었다. 일반적으로 측정된 전원이 이상적이지 않고 고조파가 포함되어 있으며 센서의 노이즈 때문에 동기좌표계 PLL의 피드백 루프에는 LPF를 사용하고 있다. 그러므로 과도상태의 빠른 동특성을 얻기 위해서 LPF를 고려한 PLL시스템의 모델링을 제안하였다. 또한 전원의 급변 시에 빠른 위상각 검출을 위한 방법으로 자동으로 제어기 대역폭과 LPF의 차단주파수를 변동시키는 가변 파라미터 PLL방법을 제안하였다. 이를 시뮬레이션과 실험을 통해 검증하여 유효성을 보이고자 한다.