• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.66-71
• /
• 2010

In the Joseon Dynasty, various fruit teas were popularized to promote health, with spread of Donguibogam and Hyangyag gugeupbang. As interest in fruit tea has recently increased, studies on its manufacture have become necessary. We used response surface analysis for rediscovery and commercialization of grape tea. Major materials of traditional grape tea are grape juice, pear juice, ginger juice, and honey, and the sugar contents of these materials were 12.3, 14.1, 3.3 and 75 $^{\circ}Brix$, respectively. When sensory examinations were conducted with subjects aged 40-60 years, the difference between dilution ratios of 100% and 150% was not significant, but tea diluted by 150% showed somewhat higher scores than did tea diluted by 100%. Ginger taste and sweetness were found to have the greatest effect on overall acceptance. Regression analysis on color, flavor, taste, and overall acceptance values, with reference to ginger juice and honey as independent variables, revealed that the $R^2$ values were 0.8411, 0.6717, 0.9499, and 0.9015, respectively. Contour maps were superimposed to obtain an optimal combination of ingredients for traditional grape tea, and the indicated levels of ginger juice and honey were 0.46-0.69% and 3.85-5.20%, in combination with grape juice, pear juice, and water concentrations of 28%, 9% and 60% (all w/w), respectively. Thus, it is now possible to prepare traditional grape tea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.6
• /
• pp.780-785
• /
• 2006

The composition analysis of various radish (Rapharnus sativus L.) leaves and the effects of drying condition on the quality characteristics of hot-air dried radish leaves were carried out by a response surface methodology. Independent variables put in drying temperature $(X_1)$ and drying time $(X_2)$, dependent variables put in color, calcium, iron, vitamin, etc. In the proximate composition of radish leaves by varieties, there were no significant differences in the ash, protein, lipid, calcium and iron content of samples, but there were significant differences in the vitamins, chlorophyll and color value of samples. The quality characteristics on dried radish leaves by central composite design, it was significant value on the moisture content, chlorophyll and color value according to drying temperature and drying times. But there were no significant differences in the contents of calcium $(31.41{\sim}35.80\;mg/g,\;dry\;base)$ and iron $(0.21{\sim}0.29\;mg/g\;dry\;base)$. The multiplex regression coefficients analysis were calculated with independent variables $(X_1,\;X_2)$ and dependent variables (moisture, chlorophyll, color value). The calculated coefficient correlations for the each samples were $R^2>0.97$. The effects of drying temperature were greater than drying time in the total chlorophyll content changes of radish leaves. Based on the present study, the optimum drying condition for the lowest color changes and effective reduction of moisture of radish leaves were expected to be $5{\sim}6$ hours at $70^{\circ}C$.

• Korean Journal of Agricultural Science
• /
• v.10 no.2
• /
• pp.324-333
• /
• 1983

Modeling of longterm runoff is theoritically based on waterbalance analysis. Simplified equation of water balance with rainfall, evapotranspiration and soil moisture storage could be formulated into regression model with variables of rainfall, pan evaporation and previous-month streamflow. The hydrologic response of water shed could be represented lumpedly, qualitatively and deductively by regression coefficients of water-balance regression model. Characteristics of regression modeling of water-balance were summarized as follows; 1. Regression coefficient $b_1$ represents the rate of direct runoff component of precipitation. The bigger the drainage area, the less $b_1$ value. This means that there are more losses of interception, surface detension and transmission in the downstream watershed. 2. Regression coefficient $b_2$ represents the rate of baseflow due to changes of soil moisture storage. The bigger the drainage area and the milder the watershed slope, the bigger b, value. This means that there are more storage capacity of watershed in mild downstream watershed. 3. Regression coefficient $b_3$ represents the rate of watershed evaporation. This depends on the s oil type, soil coverage and soil moisture status. The bigger the drainage area, the bigger $b_3$ value. This means that there are more watershed evaporation loss since more storage of surface and subsurface water would be in down stream watershed. 4. It was possible to explain the seasonal variation of streamflow reasonably through regress ion coefficients. 5. Percentages of beta coefficients what is a relative measure of the importance of rainfall, evaporation and soil moisture storage to month streamflow are approximately 89%, 9% and 11% respectively.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.227-234
• /
• 2000

Soilcrete has been a traditional material for pavement and soft ground improvement techniques. However, since the durability is not excellent and the quality is not consistent, it has not been used for various purposes up to date. However, with the increase of naturally oriented needs for light traffic roads such as pedestrian roads of garden, golf courses and sidewalks, the cases of the high strength soilcrete paving have been increased lately. This study aims at making a reference table of mix design in accordance with the required design specifications fur the high strength soilcrete admixtured with the pozzolanic cement by using a statistical experimental method. The treated soil is the clay which is widely found in Korea. As the results of this study, we could derive an effective reference mix design table for the clay treated with the pozzolanic cement stabilizer in accordance with the compressive strength of $50~150kg/cm^2$ soilcrete.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.3
• /
• pp.65-77
• /
• 2015

The urban park has important functions as a habitat for wildlife as well as open space of rest and community for people. This study was carried out to find what factors of structure and vegetation of urban parks could affect forest bird species diversity in Cheonan city. The study surveyed bird and vegetation species in 26 urban parks, Cheonan city. A correlation analysis and multiple linear regressions were performed to test whether habitat structure and vegetation were the major correlate with species diversity. The results showed the Dujeong park was the most high bird species diversity (H' = 2.13), and the Dujeong-8 park (H' = 2.02) and the Cheongsa park (H' = 1.73) were considerably higher than the other urban parks. The variables that were strongly correlated with bird species diversity were park area, number of subtree species, canopy of shrub, number of shrub species, shape index, canopy of subtree, canopy of tree, and impervious surface ratio. The regression of bird species diversity against the environmental variables showed that 3 variables of park area, canopy of subtree, and canopy of tree were included in the best model. Model variable selection was broadly similar for the 5 optimal models. It means park area and multi-layer vegetation were the most consistent and significant predictor of bird species diversity, because urban parks were isolated by built-up areas. Especially the subtree coverage that provides shelter and food for forest birds was an important variable. Therefore, to make parks circular-shaped and abundant multi-layer vegetation, which could be a buffer to external disturbances and improve the quality of habitats, may be used to enhance species diversity in creation and management of urban parks.

• Advances in nano research
• /
• v.10 no.1
• /
• pp.77-90
• /
• 2021

In the present study, novel chitosan coated magnetic magnetite (Fe3O4) nanoparticles were successfully biosynthesized from mushroom, Agaricus campestris, extract. The obtained bio-nanocomposite material was used to investigate ultra-fast and highly efficient for removal of Ni2+ ions in a fixed-bed column. Chitosan was treated as polyelectrolyte complex with Fe3O4 nanoparticles and a Fungal Bio-Nanocomposite Material (FBNM) was derived. The FBNM was characterized by using X-Ray Diffractometer (XRD), Scanning Electron Microscopy-Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Fourier Transform Infrared spectra (FTIR) and Thermogravimetric Analysis (TGA) techniques and under varied experimental conditions. The influence of some important operating conditions including pH, flow rate and initial Ni2+ concentration on the uptake of Ni2+ solution was also optimized using a synthetic water sample. A Central Composite Design (CCD) combined with Response Surface Modeling (RSM) was carried out to maximize Ni2+ removal using FBNM for adsorption process. A regression model was derived using CCD to predict the responses and analysis of variance (ANOVA) and lack of fit test was used to check model adequacy. It was observed that the quadratic model, which was controlled and proposed, was originated from experimental design data. The FBNM maximum adsorption capacity was determined as 59.8 mg g-1. Finally, developed method was applied to soft drinks to determine Ni2+ levels. Reusability of FBNM was tested, and the adsorption and desorption capacities were not affected after eight cycles. The paper suggests that the FBNM is a promising recyclable nanoadsorbent for the removal of Ni2+ from various soft drinks.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.5
• /
• pp.5-12
• /
• 2012

Antibiotics have been considered emerging compounds due to their continuous input and persistence in environment. Due to the limited biodegradability and widespread use of these antibiotics, an incomplete removal is attained in conventional wastewater treatment plants and relative large quantities are released into the environment. In this study, it was determined the adsorption and photocatalysis kinetics of antibiotics (Sulfamethoxazole, SMX) with various catalyst (Titanium dioxide; $TiO_2$, Hydroxyapatite; HAP) conditions under UV/$TiO_2$/HAP system. In addition, the statistical analysis of response surface methods (RSM) was used to determine the effects of operating parameters on UV/$TiO_2$/HAP system. $TiO_2$/HAP adsorbent were found to follow the pseudo second order reaction in the adsorption. In the result of applied intrapaticle diffusion model, the constants of reaction rate were $TiO_2$=$0.064min^{-1}$, HAP=$0.2866min^{-1}$ and $TiO_2$/HAP=$0.3708min^{-1}$, respectively.The result of RSM, term of regression analysis in analysis of variance (ANOVA) showed significantly p-value (p<0.05) and high coefficients for determination values($R^2$=96.2%, $R^2_{Adj}$=89.3%) that allowed satisfactory prediction of second order regression model. And the estimated optimal conditions for Y(Sulfamethoxazole removal efficiency, %) were $x_1$(initial concentration of Sulfamethoxazole)=-0.7828, $x_2$(amount of catalyst)=0.9974 and $x_3$(reation time)=0.5738 by coded parameters, respectively. According to the result of intraparticle diffusion model and photocatalysis experiments, it was shown that the $TiO_2$/HAP was more effective system than conventional AOPs(advanced oxidation processes, UV/$TiO_2$ system).

• Korean Chemical Engineering Research
• /
• v.56 no.4
• /
• pp.568-576
• /
• 2018

In order to investigate the adsorption characteristics of the antibiotics trimethoprim (TMP) by activated carbon (WCAC) prepared from waste citrus peel, the effects of operating parameters on the TMP adsorption were investigated by using a response surface methodology (RSM). Batch experiments were carried out according to a four-factor Box-Behnken experimental design with four input parameters : concentration ($X_1$: 50-150 mg/L), pH ($X_2$: 4-10), temperature ($X_3$: 293-323 K), adsorbent dose ($X_4$: 0.05-0.15 g). The experimental data were fitted to a second-order polynomial equation by the multiple regression analysis and examined using statistical methods. The significance of the independent variables and their interactions was assessed by ANOVA and t-test statistical techniques. Statistical results showed that concentration of TMP was the most effective parameter in comparison with others. The adsorption process can be well described by the pseudo-second order kinetic model. The experimental data of isotherm followed the Langmuir isotherm model. The maximum adsorption amount of TMP by WCAC calculated from the Langmuir isotherm model was 144.9 mg/g at 293 K.

• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.1-8
• /
• 1993

Extruded defatted soy flour (DSF) with twin screw extruder was compared with steam treated DSF for soy sauce fermentation. Independent variables of response surface methodology (RSM) for extrusion were barrel temperature $(145{\sim}165^{\circ}C)$, feed moisture content $(25{\sim}35%)$, and feed rate $(20{\sim}30\;kg/hr)$. Extrusion conditions for production of the extrudates having highest water absorption capacity, lowest bulk density and highest expansion ratio were obtained by regression analysis of each dependent variable. Electron photomicrographs revealed significant increase of porosity inside the koji made from extruded DSF. Therefore, growth of fungi inside the koji made from extrudates of DSF was accelerated to achieve higher activities of protease, ${\alpha}-amylase$, and glucoamylase compared to the koji made from steamed DSF. Although amino acid composition of soy sauces prepared from two different DSF did not show any significant difference, the content of free amino acids in soluble nitrogen compounds was higher $(13%{\pm}2)$ in soy sauce made from extruded SDF. During the whole period of fermentation color of soy sauce made from extrudates of DSF was darker. Sensory evaluation did not reveal any serious off-odor and off-taste in the soy sauce fermented from extruded DSF.

• Food Science and Preservation
• /
• v.13 no.4
• /
• pp.506-512
• /
• 2006

Gastrodia elata Blume (GEB) is a traditional herbal plant that has been used in Asian countries for centuries as an anticonvulsant analgesic, and a sedative for treating general paralysis, epilepsy, vertigo, and tetanus. This study was designed to optimize conditions for ethanol extracts or GEB by analyzing and monitoring the extraction characteristics with response surface methodology. The extract was used for analysis of the effective components of GEB. The estimated optimal conditions were 63.62% in ethanol of 5.06 mL/g in solvent per sample, and 6.25 hr in extract time. The optimal extraction conditions for $ \gamma-aminobutyric$ acid, were 45.52%, 5.67 mL/g, and 6.04 hr, while those for $\rho-hydroxybenzyl$ alcohol were 62.73%, 5.02 mL/g, and 5.95 hr. Regression equation was generated for each variables and then superimposed them, such as soluble solid, $ \gamma-aminobutyric$ acid and $\rho-hydroxybenzyl$ alcohol content thereby resulting in superimposed values of extinction conditions like $45\sim65%,\;5\sim7mL/g$ and $5\sim7$ hr, respectively.