• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.80-83
• /
• 2008

Because of its advantages of simple structure, fast response speed, strong anti-pollution ability and good stability, high-speed solenoid valve has been widely used in aeroengine control systems, and some performances of the aeroengine control systems were affected directly by the response speed of high-speed solenoid valve. For some two-position two-way highspeed solenoid cone-valve, the paper discusses the establishment of its mathematical model and analyses its response characteristics by simulation model which is run in simulink of Matlab. Further more, a backstepping and segmentation method is used in the research of response characteristics, and the method is proved to be an accurate, fast and new method to get the influences of parameters on the valve s response characteristics.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.574-577
• /
• 2004

This paper presents a hybrid system combining lead rubber bearings and hydraulic actuators controlled by a $\mu-synthesis$ method for seismic response control of a cable-stayed bridge. A hybrid system could alleviate some of restrictions and limitations that exist when each system is acting alone because multiple control devices are operating. Therefore, the overall control performance of a hybrid system may be improved compared to each system, however the overall system robustness may be negatively impacted by active device in the hybrid system or active controller may cause instability due to small margins. Therefore, a $\mu-synthesis$ method that guarantees the robust performance is considered to enhance the possibility of real applications of the control system. The performances of the proposed control system are compared with those of passive, active, semiactive control systems and hybrid system controlled by a LQG algorithm. Furthermore, an extensive robust analysis with respect to stiffness and mass matrices perturbation and time delay of actuator is performed. Numerical simulation results show that the performances of the proposed control system are superior to those of passive system and slightly better than those of active and semiactive systems and two hybrid systems show similar control performances. Furthermore, the hybrid system controlled by a f-synthesis method shows the good robustness without loss of control performances. Therefore, the proposed control system could effectively be used to seismically excited cable-stayed bridge which contains many uncertainties.

• Proceedings of the KIEE Conference
• /
• 1979.08a
• /
• pp.166-167
• /
• 1979

Performances of three computational algorithms for one-dimensional frequency filtering are compared and tradeoffs are studied. If the size of the filter impulse response is small, it is well-known that the conventional convolution is superior than the FFT convolution. If the size of the impulse response is large, it was suggested that the recursive filter might be competitive in terms of speed to the FFT convolution. We, therefore, have developed an computational, algorithm for the recursive filter to compare the speed advantages over the FFT convolution and the results are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.566-569
• /
• 1987

The primary difficulties encountered in the use of step motors are underdamped response when stopping at a specified position and dynamic instability during high-speed slewing. This paper proposes a speed and position detection scheme using the back EMF generated by the rotating permanent magnet field of a two-phase 1.8.deg. hybrid step motor, and presents its application to the state-variable feedback control of the hybrid step motor. All simulation results in a single step response show that the hybrid step motor performances such as peak overshoot and settling time are greatly improved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.87-90
• /
• 2009

A dual-cell-gap transflective liquid crystal display (TR-LCD) with identical response time in the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy condition is used to decrease the response time, while in the reflective region weak anchoring energy condition is used to increase the response time. The simulated dual-cell-gap TR-LCD has good performances.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.5
• /
• pp.259-267
• /
• 2003

In this paper, we propose a nonlinear variable PID controller using a cell-mediated immune response. An immune feedback response is based on the functioning of biological T-cells. An immune feedback response and P-controller of conventional PID controllers resemble each other in role and mechanism. Therefore, we extend immune feedback mechanism to nonlinear PE controller. And in order to choose the optimal nonlinear PID controller games, we also propose the on-line tuning algorithm of nonlinear functions parameters in immune feedback mechanism. The trained parameters of nonlinear functions are adapted to the variations of the system parameters and any command velocity. And the adapted parameters obtained outputs of nonlinear functions with an optimal control performance. To verify performances of the proposed control systems, the speed control of nonlinear BC motor is performed. The simulation results show that the proposed control systems are effective in tracking a command velocity under system variations.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.289-290
• /
• 2005

We have investigated the electro-optical (EO) performances of the flexible liquid crystal display (LCD) on twisted nematic (TN) mode according to variation of cell gap in comparison with glass LCD. There were four kinds of cells which were having cell gaps of 3$\mu$m, 4$\mu$m and 5$\mu$m, especially the lowest 2$\mu$m on flexible and glass substrates separately. The EO performances of the flexible cells on the rubbed potyimide (PI) were almost the same those of glass cells. The response time of flexible cells was shorter than that of glass cells but the alignment of liquid crystal (LC) of flexible cells was weaker than that of glass cells. The residual DC of flexible cells was on the increase like that of glass cells in compliance with lowering cell gap.

• The Journal of Asian Finance, Economics and Business
• /
• v.5 no.4
• /
• pp.135-147
• /
• 2018

There has been a recent increase in the interest towards founding companies and in line with the South Korean Government's policy on start-up support, discussions are rife about the effect of entrepreneurship on the management and performances of these companies. To enhance the competitiveness of SMEs, it is expedient to acquire and deploy consistent entrepreneurship, differentiate corporate resources, ensure the appropriate utilization of resources and the integration of such factors in response to the changing environment. This research examines relationships among entrepreneurship, three components of corporate capabilities, dynamic capability and technical performance based on resource-based view and the dynamic capability theory. The authors also investigate the moderating role of corporate life cycle. To test the hypothesis, we conducted a survey on 352 technologies -innovative SMEs located in South Korea via professional research institutes. The findings confirm the hypothesis that SMEs' entrepreneurship has a positive effect on three kinds of corporate capabilities (e.g., marketing, R&D, operations capability), and it had a positive effect on dynamic capability, whiles dynamic capability also had an influence on technical performances. The findings also confirmed the hypothesis that corporate life cycle moderates the relationship between dynamic capability and technical performances respectively. The research implications for both practitioners and academicians are discussed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.10
• /
• pp.1561-1570
• /
• 1997

This study explores the treatment of the max-value cost function over a parameter interval in parametric optimization. To avoid the computational burden of the transformation treatment using an artificial variable, a direct treatment of the original max-value cost function is proposed. It is theoretically shown that the transformation treatment results in demanding an additional equality constraint of dual variables as a part of the Kuhn-Tucker necessary conditions. Also, it is demonstrated that the usability and feasibility conditions on the search direction of the transformation treatment retard convergence rate. To investigate numerical performances of both treatments, typical optimization algorithms in ADS are employed to solve a min-max steady-state response optimization. All the algorithm tested reveal that the suggested direct treatment is more efficient and stable than the transformation treatment. Also, the better performing of the direct treatment over the transformation treatment is clearly shown by constrasting the convergence paths in the design space of the sample problem. Six min-max transient response optimization problems are also solved by using both treatments, and the comparisons of the results confirm that the performances of the direct treatment is better than those of the tranformation treatment.

• Phonetics and Speech Sciences
• /
• v.2 no.2
• /
• pp.63-68
• /
• 2010

A new version of sequential probability ratio test (SPRT) which has been investigated in utterance-length control is proposed to obtain uniform response results in speaker verification (SV). Although SPRTs can obtain fast responses in SV tests, differences in the performance may occur depending on the compositions of consonants and vowels in the sentences used. In this paper, a fast sequential probability ratio test (FSPRT) method that shows consistent performances at all times regardless of the compositions of vocalized sentences for SV will be proposed. In generating frames, the FSPRT will first conduct SV test processes with only generated frames without any overlapping and if the results do not satisfy discrimination criteria, the FSPRT will sequentially use frames applied with overlapping. With the progress of processes as such, the test will not be affected by the compositions of sentences for SV and thus fast response outcomes and even consistent performances can be obtained. Experimental results show that the FSPRT has better performance to the SPRT method while requiring less complexity with equal error rates (EER).