• Resources Recycling
• /
• v.23 no.5
• /
• pp.62-67
• /
• 2014

Used metallic can should be recycled from the point of view of environmental preservation and resource recycling. Metallic can is one of EPR items, and classified into steel can and aluminum can according to the can body material. In Korea about eighty percent of metallic cans are made of steel. In this article, production of cans and current status on domestic recycling of used metallic cans in recent years(2008-2012) were surveyed. Recycled ratio by weight of used steel and aluminum cans was about 80.8% and 81.8%, respectively in 2012. Totally it reached 81.8%.

• Resources Recycling
• /
• v.16 no.4
• /
• pp.47-60
• /
• 2007

Plastic supply and recycling are increasingly becoming matters of social concern. In our country, Extended Producer Responsibility(EPR) system has been adopted in 2003 to expand recycle and reuse of waste resources at producer side, and due to expansion of the EPR system, amount of the mixed plastic waste generation has been drastically increased. Plastic-plastic separation is most fundamental technique to achieve effective plastic recycling. This paper reviews recent developments in plastic-plastic separation techniques and describe future tasks. The mechanisms of each separation which contain gravity separation, electrostatic separation, flotation, and separation of automotive shredder residue are described, and commercial scale and lab-scale results are introduced.

• Resources Recycling
• /
• v.5 no.1
• /
• pp.9-13
• /
• 1996

Once-used $CO_2$-silicate bonded sand from domestic foundry is mostly discarded in a reclaimed land because of its bad collapsibility and reproduction properties. So this causes serious environmental problem. We can get 82% recovery of silica from used sand by scrubbing reclamation process in this research. When we repeat the reclamation-recycling of the foundry sand, artificial silica sand is broken down below 2-cycles, but natural silica sand does not destroyed when used repeatedly more than 10-cycles and have a good property of recycling with little change of its size.

• Resources Recycling
• /
• v.21 no.2
• /
• pp.59-65
• /
• 2012

The refining effect of tantalum by electron beam melting(EBM) process for recycling tantalum scraps was investigated in the study. The purity of the tantalum metals refined by EBM was evaluated using glow discharge mass spectrometry (GDMS). From the result of GDMS, most impurities in the tantalum metals were removed by EBM down to a few mass ppm levels. The purity of the refined tantalum scraps was improved up to 5N (99.9991%) from 4 N (99.996%) of the initial tantalum scraps. The amount of metallic impurities in the tantalum was decreased from 30 ppm to 8 ppm. In addition, the gaseous impurities in the tantalum were decreased from 470 ppm to 50 ppm. Therefore a possibility of refining method for recycling tantalum scraps by EBM process was confirmed in this study.

• Resources Recycling
• /
• v.33 no.2
• /
• pp.24-36
• /
• 2024

The lithium-ion battery recycling process has been classified into direct recycling, hydrometallurgical process, and pyrometallurgical process. The commercial process based on the hydrometallurgical process produces black mass through pretreatment processes consisting of dismantling, crushing and grinding, heat treatment, and beneficiation, and then each metal is recovered by hydrometallurgical processes. Since all lithium-ion battery recycling processes under development conducts hydrometallurgical processes such as leaching, after the pretreatment process, to produce precursor raw materials, this article suggests a classification method according to the pretreatment method of the recycling process. The processes contain sulfation roasting, carbothermic reduction roasting, and alloy manufacturing, and the economic feasibility of the lithium-ion battery recycling process can be enhanced using unused by-products in the pretreatment process.

• Resources Recycling
• /
• v.20 no.3
• /
• pp.3-11
• /
• 2011

Magnesium has been used as parts of vehicles, case materials of notebook PC and mobile phone, and its demand has been increasing recently. So until now, there has little magnesium scraps from the end of life vehicles or electronic parts, and most scraps has been generated from magnesium processing lines such as melting, die casting and machining. It is to review the present status of magnesium recycling. Here, domestic demand of magnesium, recycling amount and technologies used in domestic recycling companies were surveyed in recent years. In 2010, 8,840 tons of magnesium scraps were processed and used as raw materials for die casting products. The recycling ratio was estimated as 32.5%.

• Resources Recycling
• /
• v.33 no.1
• /
• pp.3-14
• /
• 2024

Owing to technological advancements and energy-saving policies, the demand for LED is increasing, leading to rapid industry expansion. Consequently, efficient recycling of accumulated LED waste has become a growing social concern, and current recycling status of LED waste resources and future directions were reviewed. Currently, waste LED recycling is focused on Ga recovery. Therefore, the development of integrated recycling technologies such as pre-treatment and concentration/recovery of high valued materials is necessary. In this study, we investigated the status and recycling technologies of waste LED and presented prospects.

• Resources Recycling
• /
• v.23 no.1
• /
• pp.3-16
• /
• 2014

Recycling of spent autocatalyst that includes the platinum group metals (PGMs), namely palladium, platinum and rhodium, is a very profitable endeavor. In order to ensure an efficient promotion of an appropriate policy-making and the technical development of the recycling process of spent autocatalyst in Korea, the generated amount, trading conditions, and recycling technology for spent autocatalyst were surveyed. The generated amount of spent autocatalyst was estimated by analyzing the domestic statistical data of registration & disuse of automobiles and the records of autocatalyst installation to new cars. The review of the recycling technology was carried out by surveying the recycling processes of 'Heesung PMTech Ltd.', which is the largest company in the recycling industry for spent autocatalyst in Korea. In addition to the above, some policy suggestions for the improvement of recycling industries for spent autocatalyst were offered.

• Resources Recycling
• /
• v.17 no.2
• /
• pp.16-29
• /
• 2008

According to the statistical data of the Ministry of Environment, 47million tons of construction waste were generated, and 96.7% of them was recycled in 2005. However, the recycled products seem to be remained under low quality. Because mixed demolition and construction waste, so called DC Waste, including concrete, brick, plaster, lumber, plastics building materials, paper and some dirt and stone, is very variable and difficult to estimate its exact composition, it is regarded as having little or no value to the construction industry. 'The Research group on recycling of construction waste' was started by the Housing & Urban Research Institute(KNHC), which is sponsored as a large scale national project by the Ministry of Construction and Transportation. This research group intends to establish recycling system through planing, processing, developing practical technology, and eventually contribute to save natural resource and to vitalize the industry. In this paper an overview of DC waste management and recycling technology is given in some detail. Particularly, "recycling law of construction waste" and recent research trends on recycling of construction waste are discussed.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 1993.03a
• /
• pp.5.2-5
• /
• 1993