• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.19-23
• /
• 2001

In addition to landfilling and incineration, waste minimization and recycling have become priorities in Taiwan's municipal waste management strategies over the past 10 years. Major recycling initiatives being implemented in Taiwan include producer responsibility, "pay-as-you-throw, " and mandatory sorting provisions. Currently, the producer responsibility regime established under the Waste Disposal Act and administered by the Environmental Protection Administration (EPA) requires that manufacturers or importers of listed items, including containers, batteries. cars, motorcycles ("scooters"), tires, oil, televisions, refrigerators, air conditioners, washing machines, computers, and printers, pay recycling fees to government recycling funds. EPA then uses the recycling funds to subsidize collection and recycling. The 2001 recycling fund budget totals NT$57 billion (NT$35 = US$l). Under the producer responsibility regime, EPA-designated retailers ("sellers") must accept end-of-life items returned to them by the consumers. At the local level, Taipei City implements a pay-as-you-throw program, whereby citizens pay waste collection and treatment fees through the purchase of special trash bags approved by the Taipei City Government. However. recyclables that are separated by citizens are collected free-of-charge by the City. Taichung City and Kaohsiung City, on the other hand, enforce mandatory sorting schemes, whereby citizens face penalties if they don't separate recyclables from the trash before pick-up. These programs have resulted in a significant reduction in municipal waste. Per capita waste collected per day has dropped from 1.143 kg in 1997 to 0.978 kg in 2000. Targeting a 10% recycling rate for municipal waste in 2001. EPA plans to research and develop new recycling techniques, expand the scope of producer responsibilities, and strengthen existing municipal recyclable collection programs. To this end, among other initiatives, EPA has prepared a draft "Resource Recycling and Reuse Act" that would complement the existing producer responsibility programs by incorporating into the current recycling framework the concept of product life-cycle management.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2003.06a
• /
• pp.94-97
• /
• 2003

This study performed the research about the recycling basin supernatant by pre-coat filtration in the D water treatment plant at Gwangju. Choice the prompt conditions with diatomaceous earth filtration which makes contaminant reduced in the basin supernatant. Element disk of candle used in this experiment are pore size 10$\mu\textrm{m}$(R), 20$\mu\textrm{m}$(B) and 40$\mu\textrm{m}$(Y). Diatomaceous earth are cake pore size 3.5$\mu\textrm{m}$(A), 7$\mu\textrm{m}$(B) and 17$\mu\textrm{m}$(C). The filtrate concentrations were from 0.18 to 0.92$\mu\textrm{g}$/1 of Chlorophyll-a. And then, removal rate percentage were from 78.30 to 95.57(R-A). In addition SS 80%, CODMn32% COD 61%, T-N 10% and T-P 39% on the D water treatment plant. The R(40$\mu\textrm{m}$) C(17$\mu\textrm{m}$) process can be substituted of reusing the recycled water of recycling basin supernatant view of capacity and removal rate of filtrate.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.692-700
• /
• 2018

In this study, the results of PBDEs and HBCDs of the products and waste that contain BFRs such as domestic electronic products, automobiles and textile products were compared with international management standards, and their excess rates were calculated. Deca-BDE was detected among the PBDEs in TV rear cover plastics, car seats, automotive interior plastics, and automobile shredding residues of products and waste containing BFRs. The comparison with Basel Convention management standards (1,000 mg/kg) for PBDE-containing wastes (4 types in total) shows that the excess rate of all samples was less than 1.5%. The estimated excess rate compared to the EU and Basel convention management standards (1,000 mg/kg) for PBDEs (4 species + deca-BDE) and TV rear cover plastics was 37.5% (30 of 80 samples exceeded the standards). The estimated excess rate compared to the Basel convention management standards (1,000 mg/kg) for HBCD, building materials products and waste was 15.7% (17 of 108 samples exceeded the standards). In the case of PBDEs, it is necessary to remove only the rear cover of CRT TV among the electric and electronic products and treat it in the flame retardant treatment facility to improve the recycling collection system. In the case of HBCD, it is necessary to appropriately dispose of the recycled materials, heat insulation materials, TV plastics, and styrofoam in marine fishery among construction materials and restrict the use as recycled raw materials.

• Korean Journal of Organic Agriculture
• /
• v.22 no.4
• /
• pp.561-579
• /
• 2014

This research estimates the necessity of a better governance plan on the purpose of fulfillment energy recovery by building resource recycling system for biomass resources and waste resources that derive from agricultural and mountain village areas. The utilization of new renewable energy technology which uses waste and biomass sources diverse as variety of resources, collecting method, operator etc. and is structurally complicated the formation of policy is also very difficult. There is failure because of the problems which occurs from the policy led by government. Biomass Town Development Project should be made through the central government and the local government integrated support system and should be formed a consultative group in order to process the project mutually with these two department including the experts from the related areas. This consultative group, while government organizations carry out the hub function of strategic knowledge management, should carry out the control tower function to be able to be net working transfer the information with the cooperation of private and government so vitalize the communication area among the related actors. And to be able to increase the participation rate of the local people the consistent and various educations should be given so a smooth business promotion progress will be desired through the change of perception and coactive participation of people.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.13-22
• /
• 2016

This study is aimed at compare and evaluate the environmental impact of End-of-Life Vehicle(ELV) on the eco-friendly technology dismantling and recycling system, using Life Cycle Assessment (LCA) method. In this study, it was analyzed for the environmental impacts of raw materials, disassemble process, recycle parts separation and waste treatment into the process of ELV treatment by greenhouse gas and resource consumption, etc. Through this study, the indoor rail type dismantling technology were recycling rate applied on the alternate system was increased by approximately 8%. As a result, it was 3 to 88% by improving the environmental impact category. In addition, the added benefit of approximately 8 - 62% in pre-market occurred through the recycling rate, improve parts reuse rate of ELV. Through the results of this study, legal compliance, improved reuse and recycling ratio, used parts market reach, enable exports has identified the need for the effort that the dissemination and diffusion of eco-friendly technology.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.606-615
• /
• 2018

Over the past two decades, the options for solid waste management have been changing from land disposal to recycling, waste-to-energy, and incineration due to growing attention for resource and energy recovery. In addition, the reduction of greenhouse gas (GHG) emission has become an issue of concern in the waste sector because such gases often released into the atmosphere during the waste management processes (e.g., biodegradation in landfills and combustion by incineration) can contribute to climate change. In this study, the emission and reduction rates of GHGs by the municipal solid waste (MSW) management options in D city have been studied for the years 1996-2016. The emissions and reduction rates were calculated according to the Intergovernmental Panel on Climate Change guidelines and the EU Prognos method, respectively. A dramatic decrease in the waste landfilled was observed between 1996 and 2004, after which its amount has been relatively constant. Waste recycling and incineration have been increased over the decades, leading to a peak in the GHG emissions from landfills of approximately $63,323tCO_2\;eq/yr$ in 2005, while the lowest value of $35,962tCO_2\;eq/yr$ was observed in 2016. In 2016, the estimated emission rate of GHGs from incineration was $59,199tCO_2\;eq/yr$. The reduction rate by material recycling was the highest ($-164,487tCO_2\;eq/yr$) in 2016, followed by the rates by heat recovery with incineration ($-59,242tCO_2\;eq/yr$) and landfill gas recovery ($-23,922tCO_2\;eq/yr$). Moreover, the cumulative GHG reduction rate between 1996 and 2016 was $-3.46MtCO_2\;eq$, implying a very positive impact on future $CO_2$ reduction achieved by waste recycling as well as heat recovery of incineration and landfill gas recovery. This study clearly demonstrates that improved MSW management systems are positive for GHGs reduction and energy savings. These results could help the waste management decision-makers supporting the MSW recycling and energy recovery policies as well as the climate change mitigation efforts at local government level.

• Resources Recycling
• /
• v.31 no.6
• /
• pp.18-24
• /
• 2022

Dry reduction using natural gas was proposed to recover tin from waste tin oxide generated in a tin bath that was used for controlling the smoothness of architectural glass during production, and the reduction behavior was investigated. The utilized vertical natural gas dry reduction system is capable to process 4 L or 20 kg depending on input raw materials. The system was established by applying the upper intake and lower discharge method. The recovery rate was 97.2% at 800 ℃ and 4 sccm flow rate and increased with the amount of input gas. Hydrogen accounted for 23% of the discharge gas, showing a 16.6% hydrogen conversion rate. The reaction behavior of tin recovered via natural gas reduction provides basic data on the new waste resource reduction/recovery technology.

• Clean Technology
• /
• v.12 no.3
• /
• pp.113-127
• /
• 2006

Waste lubricating oil(WLO)s have been recycled as energy source through direct fuel in cement kilns and fossil power plants, or as fuel oils, or re-refined lubricating base oils. In our country, they have been recycled as low grade fuel oil through chemical treatment process. In 2003, extended producer responsibility (EPR) system was adopted from deposit system on sale of lubricating oils in order to promote their recycleing rate. However, our recycling rate of WLOs have been stagnant(below 70%) for last 5 years. And there has been no research work on recycling of WLOs as re-refined base oil until now in this country. Stabilization technology of thermally cracked oils to reduce tar and malodor and to improve their color for production of high grade fuel oil, and a novel process production of high grade re-refined lubricating base oil from WLOs have been developed and commercialized recently in Canada and U.S.A., respectively. Several countries like Australia, Italy, Germany and U.S.A., etc. are encouraging recycling companies to recycle WLOs as re-refined lubricating oil by giving greater subsidies or benefits compared to other recycling methods. They also adopt a policy to purchase re-refined lubricating oil preferentially in the federal or local governments and to recommend consumers to purchase it willingly. Based on the facts that several advanced countries have adopted a policy to recycle WLOs as re-refined base oil for saving of petroleum resource and reduction of environmental pollution, it is right time to be considered that our present policy for recycling of WLOs should be reevaluated and the new policy of their environmental-friendly and sustainable recycling should be established.

• Journal of Environmental Impact Assessment
• /
• v.18 no.5
• /
• pp.257-270
• /
• 2009

The central government in Korea has pursued a policy to privatize municipal solid waste treatment facilities in order to enhance the effectiveness of public financial management in recent years. To understand the intentions of local governments on this policy, the survey with questionnaires on 37 out of 256 local governments was made in October, 2007. The results were analyzed and compared in 6 classified policy areas. The results showed that local government had enough financial status to operate the facilities with proper services and had the opinion with positive management in finance with increasing rate of prospective views. Among the facilities operated by local governments, the satisfaction levels for landfill(46.2%) and incineration(40.0%) were relatively higher. However those for recycling and food waste resource facilities were not satisfied with showing lower rate of satisfaction. The priority of privatization in consideration among them were following in order of food waste resource plants(76.2%), incinerators(63.6%), and recycling facilities(53.9%) and the most considerable reason to privatize them was due to resolve financial problems(59.7%). They thought and expected that the privatization would provide cost reduction effects in local governments and also be easier to achieve the environmental goals. To enhance such privatization, expanding more incentives by central government would be essential as shown in the investigation of this survey.

• Resources Recycling
• /
• v.21 no.1
• /
• pp.49-59
• /
• 2012

One of the world's top resource-rich countries, the Democratic Republic of the Congo has ample reserves of cobalt, iron ore, copper and diamond in particular. Importing most of major mineral resources, the Republic of Korea has examined-together with the Congo government since 2008-the possibility of a project where it supports port construction in the Democratic Republic of the Congo and acquires useful minerals such as zinc, cobalt and copper in exchange through slag reprocessing in the local city of Lubumbashi. This study conducted feasibility analysis on the slag reprocessing project in Lubumbashi, Congo and found that the project's payback period stands at 6.7 years, net present value(NPV) at 34 million dollars and internal rate of return(IRR) at 17.4%. According to sensitivity analysis that takes into account uncertainties concerning taxation, fixed cost, operational cost and resource prices, the NPV of the project ranges from -24.8 million dollars to 92.7 million dollars.