Resources Recycling (자원리싸이클링)

The Korean Institute of Resources Recycling (한국자원리싸이클링학회)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Environmental Review through the Life Cycle Assesment Method of End-of-life Vehicle Dismantling Technology Via Indoor Rail Type

레일형 옥내화 자동차해체시스템의 전과정평가 방법을 통한 환경영향평가에 관한 연구

  • Kim, DaeBong (Department of Environmental Engineering, Kumoh National Institute of Technology,) ;
  • Park, JeChul (Department of Environmental Engineering, Kumoh National Institute of Technology,) ;
  • Park, Jungho (Insun Motors co.) ;
  • Ha, SeongYong (Department of Automotive Engineering, Shinhan University) ;
  • Sung, Jonghwan (Solutis co. ltd.)
  • Received : 2016.09.13
  • Accepted : 2016.12.04
  • Published : 2016.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study is aimed at compare and evaluate the environmental impact of End-of-Life Vehicle(ELV) on the eco-friendly technology dismantling and recycling system, using Life Cycle Assessment (LCA) method. In this study, it was analyzed for the environmental impacts of raw materials, disassemble process, recycle parts separation and waste treatment into the process of ELV treatment by greenhouse gas and resource consumption, etc. Through this study, the indoor rail type dismantling technology were recycling rate applied on the alternate system was increased by approximately 8%. As a result, it was 3 to 88% by improving the environmental impact category. In addition, the added benefit of approximately 8 - 62% in pre-market occurred through the recycling rate, improve parts reuse rate of ELV. Through the results of this study, legal compliance, improved reuse and recycling ratio, used parts market reach, enable exports has identified the need for the effort that the dissemination and diffusion of eco-friendly technology.

본 연구는 환경 친화적인 폐자동차 해체 및 재활용 기술을 대상으로 전과정 평가 방법을 적용하여 환경에 미치는 영향을 평가해 보았다. 폐자동차 해체 처리 과정에서 투입 원부재료 및 배출되는 해체 부품의 재활용 및 폐기 처리에 따른 자원소모, 지구온난화 등의 환경적 영향에 대한 분석을 수행했다. 본 연구를 통해 옥내화 레일형 기술이 적용된 해체 시스템을 통해 기존 해체 시스템 대비 재활용율이 약 8% 증가 됨을 확인하였으며, 이를 통해 환경 영향 범주별 3 ~ 88%의 개선효과가 있음을 확인하였다. 또한, 폐자동차의 해체 처리 속도 및 부품의 재활용 및 재자원화 비율 향상을 통해 국내외 중고부품 시장에서 약 9 ~ 67% 의 부가이익을 창출할 수 있음을 확인하였다. 본 연구의 결과를 통해, 폐자동차 처리의 법규 준수와 동시에 재자원화율 증대 및 중고 부품 시장의 활성화를 위해 레일형 옥내화 폐자동차 해체 시스템의 보급 및 확산 노력의 필요성을 확인할 수 있었다.

Keywords

References

  1. Jung et al., 2012 : Trend of Eco-friendly Dismantling Technology of ELV, Auto Journal, p.32.
  2. H. C. Yi et al., 1997 : Collection and Recycling of Scrap Cars, Journal of KSAE, Vol.19(6), pp.34-44.
  3. EDP target product and guideline (Ministry of Environment Notification 2013-116), Ministry of environment
  4. Ministry of environment, 2014 : Regulations on Certification of Carbon Footprint Labeling (Ministry Notification No. 2014-150), KOREA
  5. K. M. Jeong et al., 2005 : Life Cycle Assessment on the End-of-Life Vehicle Treatment System in Korea, Transactions of KSAE, Vol. 13(6), pp.105-112.
  6. Park et al., 2012 : A Study on Monitoring System Architecture for Calculation of Practical Recycling Rate of End of Life Vehicle, CLEAN TECHNOLOGY, Vol.18(2), pp.373-378 https://doi.org/10.7464/ksct.2012.18.4.373
  7. Korea Automotive Recyclers Association, 2009 : Research on effective recycling of ELV dismantled parts, KOREA.
  8. Ministry of environment, 2009 : Study on efficient recycling of dismantling end-of-life vehicle parts, KOREA.
  9. Maria B. G. Castro et al., 2003 : Life cycle impact assessment of the average passenger vehicle in the Netherlands, Int J LCA, Vol. 8, p.297. https://doi.org/10.1007/BF02978922