• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.6
• /
• pp.613-619
• /
• 2000

The purpose of the present study was to investigate the effect of Bioactive glass on bone regeneration in the experimental mandibular bone defects. Five rabbits, weighing about 2.0kg, were used. Three artificial bone defects, $5{\times}5{\times}5mm$ in size, were made at the inferior border of the mandible. In the experimental group 1, the bone defect was grafted with $Biogran^{(R)}$ and covered with $Bio-Gide^{(R)}$ resorbable membrane. In the experimental group 2, $Biogran^{(R)}$ was grafted only. In the control group, the bone defect was filled with blood clot and was spontaneously healed. The animals were sacrificed at 1, 2, 4, and 8 weeks after the graft. Microscopic examination was performed. Results obtained were as follows: In the control group, the osteoid tissue was observed at week 1 and the bone trabeculi were connected each other and matured at week 2. The lamellar bone formation appeared at week 4, and the amount of bone tissue was increased at week 8. In the experimental group 1, the fibrous tissue was filled between the granules of Bioactive glass and the cartilage formation was found adjacent to the normal bone at week 1. The bone tissue was formed between the granules at week 2, while the amount of bone tissue increased and the lamellar bone formation was observed at week 4. The lamellar bone was increased at week 8. Histologic findings were Similar between the experimental groups 1 and 2, although the amount of Bioactive glass granules lost was increased in the latter. These results suggest that new bone formation is found around the Bioactive glass granules grafted into the bone defects, and the membrane plays a role in keeping the granules and preventing the fibrous tissue invasion.

• Journal of Periodontal and Implant Science
• /
• v.43 no.6
• /
• pp.301-307
• /
• 2013

Purpose: This in vitro study was performed to assess the adherence of Porphyromonas gingivalis to a resorbable blast media (RBM) titanium surface pretreated with an ultrasonic scaler or toothbrush and to evaluate the effects of the treatment of the RBM titanium discs on the bacterial removal efficiency of brushing by crystal violet assay and scanning electron microscopy. Methods: RBM titanium discs were pretreated with one of several ultrasonic scaler tips or cleaned with a toothbrush. Then the titanium discs were incubated with P. gingivalis and the quantity of adherent bacteria was compared. The disc surfaces incubated with bacteria were brushed with a toothbrush with dentifrice. Bacteria remaining on the disc surfaces were quantified. Results: A change in morphology of the surface of the RBM titanium discs after different treatments was noted. There were no significant differences in the adherence of bacteria on the pretreated discs according to the treatment modality. Pretreatment with various instruments did not produce significant differences in the bacterial removal efficiency of brushing with dentifrice. Conclusions: Within the limits of this study, various types of mechanical instrumentation were shown to cause mechanical changes on the RBM titanium surface but did not show a significant influence on the adherence of bacteria and removal efficiency of brushing.

• Journal of Periodontal and Implant Science
• /
• v.50 no.5
• /
• pp.327-339
• /
• 2020

Purpose: The purpose of this study was to examine the local tissue reactions associated with 3 different poly(lactic-co-glycolic acid) (PLGA) prototype membranes and to compare them to the reactions associated with commercially available resorbable membranes in rats. Methods: Seven different membranes-3 synthetic PLGA prototypes (T1, T2, and T3) and 4 commercially available membranes (a PLGA membrane, a poly[lactic acid] membrane, a native collagen membrane, and a cross-linked collagen membrane)-were randomly inserted into 6 unconnected subcutaneous pouches in the backs of 42 rats. The animals were sacrificed at 4, 13, and 26 weeks. Descriptive histologic and histomorphometric assessments were performed to evaluate membrane degradation, visibility, tissue integration, tissue ingrowth, neovascularization, encapsulation, and inflammation. Means and standard deviations were calculated. Results: The histological analysis revealed complete integration and tissue ingrowth of PLGA prototype T1 at 26 weeks. In contrast, the T2 and T3 prototypes displayed slight to moderate integration and tissue ingrowth regardless of time point. The degradation patterns of the 3 synthetic prototypes were similar at 4 and 13 weeks, but differed at 26 weeks. T1 showed marked degradation at 26 weeks, whereas T2 and T3 displayed moderate degradation. Inflammatory cells were present in all 3 prototype membranes at all time points, and these membranes did not meaningfully differ from commercially available membranes with regard to the extent of inflammatory cell infiltration. Conclusions: The 3 PLGA prototypes, particularly T1, induced favorable tissue integration, exhibited a similar degradation rate to native collagen membranes, and elicited a similar inflammatory response to commercially available non-cross-linked resorbable membranes. The intensity of inflammation associated with degradable dental membranes appears to relate to their degradation kinetics, irrespective of their material composition.

• Journal of Korean Dental Science
• /
• v.9 no.1
• /
• pp.19-27
• /
• 2016

Purpose: Laser treatment has become a popular method in implant dentistry, and lasers have been used for the decontamination of implant surfaces when treating peri-implantitis. This study was performed to evaluate the effects of an Erbium-doped:Yttrium-Aluminum-Garnet (Er:YAG) laser with different settings on machined (MA), sand-blasted and acid-etched (SA), and resorbable blast media (RBM) titanium surfaces using scanning electron microscopy and confocal microscopy. Materials and Methods: Four MA, four SA, and four RBM discs were either irradiated at 40 mJ/20 Hz, 90 mJ/20 Hz, or 40 mJ/25 Hz for 2 minutes. The specimens were evaluated with scanning electron microscopy and confocal microscopy. Result: The untreated MA surface demonstrated uniform roughness with circumferential machining marks, and depressions were observed after laser treatment. The untreated SA surface demonstrated a rough surface with sharp spikes and deep pits, and the laser produced noticeable changes on the SA titanium surfaces with melting and fusion. The untreated RBM surface demonstrated a rough surface with irregular indentation, and treatment with the laser produced changes on the RBM titanium surfaces. The Er:YAG laser produced significant changes on the roughness parameters, including arithmetic mean height of the surface (Sa) and maximum height of the surface (Sz), of the MA and SA surfaces. However, the Er:YAG laser did not produce notable changes on the roughness parameters, such as Sa and Sz, of the RBM surfaces. Conclusion: This study evaluated the effects of an Er:YAG laser on MA, SA, and RBM titanium discs using confocal microscopy and scanning electron microscopy. Treatment with the laser produced significant changes in the roughness of MA and SA surfaces, but the roughness parameters of the RBM discs were not significantly changed. Further research is needed to evaluate the efficiency of the Er:YAG laser in removing the contaminants, adhering bacteria, and the effects of treatment on cellular attachment, proliferation, and differentiation.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.2
• /
• pp.182-190
• /
• 2008

Fracture of mandible is the most frequent fracture among many types of maxillofacial fracture, and reduction of mandible fracture is performed using various methods of treatment to maintain bonding strength of fractured bone. Among these treatment of bone fracture, a semirigid fixation method which can reduce the period of intermaxillary fixation using metal mini plate under general or local anesthesia is spotlighted these days. The metal mini plate used during this semirigid fixation procedure is Titanium which is bio-inactive one and was used widely, but because the side effect of fracture reduction using titanium have been demonstrated recently, fracture reduction using biodegradable plate become to attract people's attention. The purpose of this study was to report the clinical case and review of the literature with the reduction of mandible fracture using biodegradable plate.

• Journal of Periodontal and Implant Science
• /
• v.30 no.2
• /
• pp.229-242
• /
• 2000

The purpose of this study was to evaluate the effect of fibrin tissue adhesive and porous resorbable calcium carbonate on the periodontal regeneration of the class II furcation defect in dogs. Class II furcation defect was surgically created on the second, third, and fourth premolars bilaterally in the mandibles of six mongrel dogs. The experimental sites were divided into four groups according to the treatment modalities: Control-surgical debridement only; Group I-calcium carbonate grafting; Group II-application of fibrin adhesive only; Group III-application of fibrin adhesive after calcium carbonate grafting. The animals were sacrificed at the 2, 4, and 12 weeks after periodontal surgery and the decalcified specimens were prepared for histological and histometrical examination. The results are as follows : Clinically, there were no inflammatory response in all groups after 2, 4, 12 weeks. In the Control group, junctional epithelium was grown downward to the reference notch. In Group I, graft materials were exfoliated from the defect throughout the experimenta periods andnew bone was seen in the notch area at 4 and 12 week specimens. In Group II, fibrin adhesive was absorbed at 2 week specimens, and connective tissue attachment increased than that of control group. New cementum and new bone were seen above the notch area. In Group III, the graft material was maintained in the defect throughout the experimental period and inducing the amount of periodontal tissue regeneration was higher than other groups. These results suggest that the use of fibrin tissue adhesive in conjunction with porous resorbable calcium carbonate would improves the stability of graft material and inhibit the epithelial down growth and make it be a feasible method for periodontal regeneration.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.37 no.3
• /
• pp.214-224
• /
• 2011

Objective: This study examined the potential of the in vitro osteogenesis of microtopographically modified surfaces, RBM (resorbable blasting media) surfaces, which generate hydroxyapatite grit-blasting. Methods: RBM surfaces were modified hydroxyapatite grit-blasting to produce microtopographically modified surfaces and the surface morphology, roughness or elements were examined. To investigate the potential of the in vitro osteogenesis, the osteoblastic cell adhesion, proliferation, and differentiation were examined using the human osteoblast-like cell line, MG-63 cells. Osteoblastic cell proliferation was examined as a function of time. In addition, osteoblastic cell differentiation was verified using four different methods of an ALP activity assay, a mineralization assay using alizarin red-s staining, and gene expression of osteoblastic differentiation marker using RT-PCR or ELISA. Results: Osteoblastic cell adhesion, proliferation and ALP activity was elevated on the RBM surfaces compared to the machined group. The cells exhibited a high level of gene expression of the osteoblastic differentiation makers (osteonectin, type I collagen, Runx-2, osterix). imilar data was represented in the ELISA produced similar results in that the RBM surface increased the level of osteocalcin, osteopontin, TGF-beta1 and PGE2 secretion, which was known to stimulate the osteogenesis. Moreover, alizarin red-s staining revealed significantly more mineralized nodules on the RBM surfaces than the machined discs. Conclusion: RBM surfaces modified with hydroxyapatite grit-blasting stimulate the in vitro osteogenesis of MG-63 cells and may accelerate bone formation and increase bone-implant contact.

• Journal of Periodontal and Implant Science
• /
• v.39 no.2
• /
• pp.129-138
• /
• 2009

Purpose: This study was designed to compare the bond regeneratiom effects of treatment using silk fibroin membrane ( Nanogide-S$^{(R)}$ ) resorbable barrier with control group treated by polyactic acid / polylacticglycolic acid membrane(Biomesh$^{(R)}$ ) Methods: 44 severe bone loss on extraction socket from 44 patients were used in this study. In experimental group 22 sites of them were treated by silk fibrin membrane as and the other 22 sites were treated by polyactic acid/ polylacticglycolic acid membrane as a control group. Clinical parameters including recovered bone width, length and radiographic parameter of vertical length were evlauated at base line and 3 months after surgery. Results: 1) Severe bone width, length was significantlly decreased in two group. 2) Bone width, length was significantlly decreased in two group. 3) Decreased bone width, length and radiographic examination differences between group. Conclusions: On the basis of these results, silk fibrin resorbable membrane has similar bone regeneration ability to polyactic acid / polylacticglycolic acid membrane in guided bone regeneration for severe bone loss defect on extraction socket.

• Journal of Periodontal and Implant Science
• /
• v.32 no.1
• /
• pp.113-127
• /
• 2002

The purpose of this study is to evaluate histologically the tissue response and resorption of various nonresorbable and resorbable suture materials used for periodontal surgery, using a subcutaneous model on the dorsal surface of the rat. In this study, 10 Sprague-Dawley male rats (mean BW 150gm) were used and the commercially available materials included polyglactin 910, pain gut, nylon, e-PTFE. Animals were sacrificed at 3 days, 1, 2 and 4 weeks after implantation of various nonresorbable and resorbable suture materials. Specimens were prepared with Hematoxylin-Eosin stain for light microscopic evaluation. The results of this study were as follows: 1. Resorption : The resorption of plain gut was showed at 1 week after implantation, was lost their structure and almost resorbed at 4 weeks. The resorption of polyglactin 910 was started at 2 weeks and slowly absorbed untill 4 weeks. 2. Tissue response : Plain gut showed persistent and severe inflammatory reactions from 3 days to 4 weeks. Polyglactin 910, e-PTFE and nylon showed mild inflammatory reactions. Suture material should be biocompatible and be able to be functioned until tissue tensile strength reaches maximum level. In this study, polyglactin 910, nylon and e-PTFE are considered to be proper suture materials for periodontal surgery.

• Journal of Periodontal and Implant Science
• /
• v.35 no.4
• /
• pp.877-889
• /
• 2005

This study was designed to compare the effects of treatment using chitosan membrane $(Nanogide-C^{(R)})$ resorbable barrier with control treated by polylactic acid/polylacticglycolic acid membrane(PLA/PLGA membrane, $Biomesh^{(R)}$). 44 furcation defecs from 44 patients with class 2 furcation degree were used for this study, 22 sites of them were treated by chitosan membrane as experimental group and 22 site were treated by PLA/PLGA membrane as control group. Clinical parameters including probing depth, gingival recession, attachment level and radiographic examination were evlauated at base line, 1 month, 2 month and 3 month. after surgery. Statistical test used to analyze these data included paired t-test, one way ANOVA. The results are as follows : 1. Probing depth was significanlly decreased in the two group and there were significant differences between groups(p<0.05). 2. Gingival recession was not significanlly increased in the two group and there were no significant differences between groups(p<0.05). 3. Loss of attachment was statistically decreased in the two group and there were no significant differences between groups(p<0.05). 4. Horizontal bone level was significanlly increased in the two group and there were significant differences between groups(p<0.05). On the basis of these results, chitoans resorbable membrane has similar potential to PLA/PLGA membrane in GTR for furcation defect.