• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.60-61
• /
• 2017

본 논문에서는 플라스마 부하의 특성을 고려하여 LCCL 공진 네트워크가 적용된 RPG (remote plasma generator)용 공진형 인버터를 설계 하고 제어한다. 공진네트워크 설계와 인버터 제어 시, 플라스마 부하가 가지는 특징인 Drop-out 현상을 방지하면서 정격범위 내에서 출력 전류를 얻을 수 있도록 하기 위해 위상천이 기법을 적용할 수 있도록 설계하고 시뮬레이션을 통해 설계된 공진네트워크의 타당성을 검증한다.

• Journal of Power Electronics
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2019

Current imbalance is the main factor affecting the lifespan of light-emitting diode (LED) lighting systems and is generally solved by active or passive approaches. Given many new lighting applications, independent control is particularly important in achieving different levels of luminance. Existing passive and active approaches have their own limitations in current sharing and independent control, which bring new challenges to the design of LED drivers. In this work, a multichannel resonant converter based on switched-capacitor control (SCC) is proposed for solving this challenge. In the resonant network of the upper and lower half-bridges, SCC is used instead of fixed capacitance. Then, the individual current of the LED array is obtained through regulation of the effective capacitance of the SCC under a fixed switching frequency. In this manner, the complexity of the control unit of the circuit and the precision of the multichannel outputs are further improved. Finally, the superior performance of the proposed LED driver is verified by simulations and a 4-channel experimental prototype with a rated output power of 20 W.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.25 no.6
• /
• pp.451-458
• /
• 2020

In this study, a trade-off analysis of a power conversion system (PCS) is performed in accordance with a power semiconductor device to establish the suitable operating frequency range for the anyplace induction heating system. A resonant network is designed under each operating frequency condition to compare and analyze the PCS losses depending on the power semiconductor device. On the basis of the simulation results, the PCS losses and frequency condition are calculated. The calculated results are then used for a trade-off analysis between Si-MOSFET and GaN-HEMT based on PCS. The suitable operating frequency range is determined, and the validity of the analysis results is verified by the experiment results.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.12
• /
• pp.2051-2059
• /
• 2016

To date, there has been no employment of a magnetoelastic (ME) biosensor method to detect Salmonella enterica serovar Typhimurium in soil. The ME biosensor method needs to be investigated and modified for its successful performance. The filtration method, cation-exchange resin method, and combinations of both methods were employed for the extraction of S. Typhimurium from soil. The number of S. Typhimurium and the resonant frequency shift of the ME sensor were then compared using a brilliant green sulfa agar plate and an HP 8751A network analyzer. A blocking study was performed using bovine serum albumin (BSA), polyethylene glycol (PEG), and casein powder suspension. Finally, the modified ME biosensor method was performed to detect S. Typhimurium in soil. The number of S. Typhimurium was significantly decreased from 7.10 log CFU/soil to 4.45-4.72 log CFU/soil after introduction of the cation-exchange resin method. The greatest resonant frequency shift of the measurement sensor was found when employing centrifugation and filtration procedures. The resonant frequency shift of the PEG-blocked measurement sensor was $3,219{\pm}755Hz$, which was significantly greater than those of the BSA- and casein-blocked ME sensor. The optimum concentration of PEG was determined to be 1.0 mg/ml after considering the resonant shift and economic issue. Finally, the modified ME biosensor method was able to detect S. Typhimurium in soil in a dose-response manner. Although these modifications of the ME biosensor method sacrificed some advantages, such as cost, time effectiveness, and operator friendliness, this study demonstrated a novel approach of the ME biosensor method to detect S. Typhimurium in soil.

• Journal of Power Electronics
• /
• v.17 no.4
• /
• pp.892-904
• /
• 2017

A design of a Class-E inverter with only one inductor and one capacitor is presented. It is operated at the optimal operation mode for domestic cooker. The design principle is based on the zero-voltage derivative switching (ZVDS) of the Class-E inverter with a parallel load network, which is a parallel resonant equivalent circuit. An induction load characterization is obtained from a large-signal excitation test bench, which is the key to an accurate design of the induction cooker system. Consequently, the proposed scheme provides a more systematic, simple, accurate, and feasible solution than the conventional quasi-resonant inverter analysis based on series load network methodology. The derivative of the switch voltage is zero at the turn-on transition, and its absolute value is relatively small at the turn-off transition. Switching losses and noise are reduced. The parameters of the ZVDS Class-E inverter for the domestic induction cooker must be selected properly, and details of the design of the components of this Class-E inverter need to be addressed. A 1,200 W prototype is designed and evaluated to verify the validation of the proposed topology.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1029-1031
• /
• 2001

In this paper, we propose a three-phase soft-switching PWM-PFC converter and describe the circuit operations and the experimental results. The proposed converter is constructed by using a resonant network in parallel with the main switch of the conventional PWM converter. A new PWM-PFC converter achieves including the auxiliary switches without increasing their voltage and current stress.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.7
• /
• pp.39-47
• /
• 1992

This paper showed that theoretical site attenuation curves were obtained simply by the method of moments analysis for current integral equations on antennas. Since the expansion coefficients of driving and receiving points were calculated from the method of moments procedure, site attenuations were evaluated simply using these basic antenna parameters. Theoretical site attenuations were calculated with half-wave resonant dipoles connected directly to a 50 ohm receiving system and connected to a 72/50 ohm matching network, respectively. Results were compared with other theoretical studies reported so far. Also included were experimental results for site attenuations to prove the validity of theoretical analysis.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.737-746
• /
• 2017

In 2017, amid changes in the security market such as integrated security (IS) and convergence security (CS), a variety of security paradigms in terms of operation and management have been suggested. Rather than changing existing network infrastructure and bringing about fluid, multi-dimensional changes, these solutions and technologies focus entire security capacity on a primary protection, leading to network infrastructure suffering from unexpected inherent violations and problems in a continued manner. Therefore, it is time to propose and develop a flexible network section that can protect from attacks of similar pattern and concentrated traffic attacks by applying a new concept of WB (Water-Bubble) to network infrastructure and analyzing on the basis of experiment and installation. Methodology of the WB-based highly secure flexible network section proposed in this study is expected to provide materials for studies on how to achieve network section security taking into account three major limitations and security standards: fluidity, unpredictability, and non-area scalability by contact point ratio, by changing a network area predicted to be the final target of attack into resonant network section (area) with flexible area changes.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.2
• /
• pp.38-45
• /
• 2019

The present work suggests a numerical approach using a thermoacoustic network model for the eigenvalue calculation of thermoacoustic instability problems in an aero gas turbine combustor. The model is developed based on the conservation laws for mass, momentum, and energy between acoustic network elements with an area change. Acoustic field in a practical aero gas turbine combustor which has a complicated flow path is analyzed using the current model. The predictive capabilities of the current modeling approach are compared with the acoustic characteristics calculated using Helmholtz solver based on 3D finite element method(FEM).

• Journal of Advanced Navigation Technology
• /
• v.16 no.5
• /
• pp.773-780
• /
• 2012

ZOR(zeroth order resonance) antenna for 2.45GHz WLAN(wireless local area network) is designed by use of CRLH-TL(composite right left handed transmission line) meta-material. The electrical length of conventional antennas is determined generally according to the resonant frequency, whereas that of ZOR antenna can be determined without reference to the resonant frequency. Therefore ZOR antenna has advantage in miniaturization of antenna in comparison with conventional antennas. In order to design such ZOR antenna, first unit cell with electrical length shorter than a quarter wavelength at 2.45GHz is designed to the some characteristics of homogeneous medium. In order to decrease resonant frequency and enhance frequency bandwidth, the proposed antenna is fed by CPW(co-planar waveguide) and short stub between radiation patch and ground plane is used for obtaining both higher inductance and smaller capacitance than previous mush-room type of CRLH-TL.