• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.4
• /
• pp.22-29
• /
• 2002

Usually, much harmonics are included and cause harmonic loss of motor, torque pulsation, electro-magnetic noise and shock etc. by switching function of inverter when drive induction motor variableness inside. It applied partial resonant Buck converter and three phase voltage type SPWM inverter circuit to induction motor driving system in this paper that see to solve such problem. Changed operation condition variously to do input current of circuit that propose sine-wave by unit power factor almost and capacitor supplied bringing back to life voltage by power supply arranging properly assistance diode and electric power switching. Power factor and efficiency improved as that minimize variation of input at power supply voltage polarity reverse by that add voltage reversal function. Also, by using output filter, reduced harmonic of output line to line voltage components, and introduce state space analysis and forecast operation of rectifier. Such all items confirmed validity through simulation and an experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.504-511
• /
• 2003

In this paper, inverter type neon power supply using a piezoelectric transformer is fabricated and its characteristic is investigated. Developed neon power supply is composed of basic circuit and blocks, such as rectifier part, frequency oscillation part and piezoelectric transformer and resonant half bridge inverters. In this paper for complement the low power limitation, piezoelectric transformer at parallel connected driving by inverter is studied for noon tubes system of high power. When piezoelectric transformer is connected with parallel, LC filter connection method with parallel and selection of inductance L and capacitor C of primary side is suggested for reduce unbalanced current at the terminal of each transformer. Piezoelectric transformers use piezoelectric ceramic devices. Thus it is wireless therefore it has high power density, high Isolation level, low loss, more light, and miniaturization. In addition, high voltage transfer ratio is expected because there is no leakage inductance. Also, it has economic merit that the electrical loss Is low because structure is simple, small and tighter weight.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.19 no.1
• /
• pp.64-70
• /
• 2014

In this paper, the new LLCL filter is proposed for grid connected three-phase PWM inverter for passive damping. LLCL filter inserts a small inductor in the branch of the capacitor of the traditional LCL filter to compose a series resonant circuit to reduce the switching-frequency component on grid current. Using LLCL filter, the switching-frequency current ripple components can be attenuated much better than the LCL filter, leading to a decrease in the total inductance. However, the resonance phenomena caused by zero impedance from the addition of LC branch in LLCL filter can be a big problem. Resonance phenomena of LLCL filter can be a source of grid system instability, so proper damping methods are required. However, it is difficult to apply a passive damping method in the conventional LLCL filter, because the damping resistor increase impedance of the LC branch. Therefore, switching frequency component of grid current can not much attenuated by low Q of LC series resonance effect. In this paper, a new LLCL filter is proposed to overcome the conventional LLCL filter with passive damping. The validity of the proposed method is proven by simulation and experimental result.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.7
• /
• pp.534-538
• /
• 2010

X-ray systems for medical treatment use noninvasive procedures. Being capable of locally inspecting the inside of the body, X-ray systems are routinely used for basic diagnosis. X-ray systems to be used for medical purposes were originally made with a gas filled tube inside an induction coil in the initial stages of development but with this approach it becomes difficult to take a satisfactory picture through thick body sections, non invasively. However continued development made it possible to take non-invasive pictures of breasts, blood vessels and other body parts through thick body sections. Recently, high-voltage X-ray generators of more compact size, increased generation efficiency, and sophisticated output control have become possible. All of these features are made possible by the use of a high-frequency output from an inverter and a fast switching semiconductor device. In this paper, we describe a new X-ray generator operating with a resonant inverter in order to reduce switching loss and high frequency noise. In addition, in order to identify the differences amongst types of rectification, we have compared output and the quality of X-ray pictures obtained with full-wave rectification and dual-voltage rectification methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.12
• /
• pp.3587-3593
• /
• 2009

Nowadays, the PV systems have been focused on the interconnection between the power source and the grid. The PV inverter, either single-phase or three-phase, can be considered as the core of the whole system because of an important role in the grid-interconnecting operation. An important issue in the inverter control is the load current regulation. In the literature, the Proportional+Integral (PI) controller, normally used in the current-controlled Voltage Source Inverter (VSI), cannot be a satisfactory controller for an ac system because of the steady-sate error and the poor disturbance rejection, especially in high-frequency range. By comparison with the PI controller, the Proportional+Resonant (PR) controller can introduce an infinite gain at the fundamental ac frequency; hence can achieve the zero steady-state error without requiring the complex transformation and the dq-coupling technique. In this paper, a PR controller is designed and adopted for replacing the PI controller. Based on the theoretical analyses, the PR controller based control strategy is implemented in a 32-bit fixed-point TMS320F2812 DSP and evaluated in a 3kW experimental prototype Photovoltaic (PV) power conditioning system (PCS). Simulation and experimental results are shown to verify the performance of implemented control scheme in PV PCS.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1169-1171
• /
• 2002

In this paper, RFRPP(Random Frequency Randomized Pulse Position ) PWM for three-phase voltage-controlled inverters is proposed. The LLPWM(Lead-Lag PWM) techinquc is that three switching pulses are located randomly back and forth in each switching interval. But with the restriction of random distribution, the harmonic spectrum cannot be dispersedly and continuously distributed. This paper calculates the duty ratio of the switching pulse firstly. Second, the switching pulses are located randomly in the switching interval. Third, the fixed switching frequency of the space vector modulation is randomly varied. To verify the validity of the proposed technique, simulation study is tried using Matlab/Simulink. When a proposed techniquc is employed, the harmonic spectrum of the inverter output voltagc varies from one cycle to the next and the EMI(Electromagnetic Interference) and resonant vibration are greatly alleviated.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.101-102
• /
• 2016

반도체 변압기를 구성하는 단상 계통 연계형 인버터는 역률을 높이기 위해 전류를 계통 전압과 동상으로 제어하는 것이 요구된다. 산업에서 통상적으로 이용되는 비례-적분 제어기는 정현파의 참조 값을 추적할 때 항상 정상 상태 오차를 수반한다. 비례-공진 제어기는 기본 주파수에서 충분히 큰 이득을 도입함으로써 정상 상태 오차를 줄일 수 있다. 그러나 계단 응답에서 정상 상태 오차를 가진다는 단점이 있다. 본 논문에서는 단상 계통 연계형 인버터의 효과적인 전류 제어를 위하여 정현파 추적뿐만 아니라 계단 응답에서 정상 상태 오차 제거가 가능한 제어기를 제안한다. 본 논문에서 제안하는 제어기는 시뮬레이션을 통해 유효성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.445-446
• /
• 2016

초음파 트랜스듀서는 다양한 산업 분야에 응용되고 있다. 초음파 트랜스듀서는 압전 소자에서 발생하는 초음파를 이용하는데, 본 논문은 알루미늄 용탕 처리에 적용하였다. 알루미늄 용탕 처리용 초음파 트랜스듀서는 고주파인 공진주파수를 이용하여 동작하게 된다. 초음파 트랜스듀서는 압전 소자의 온도 및 부하에 따라 공진 주파수가 이동하게 되는 문제점을 가지고 있다. 본 논문은 알루미늄 용탕을 처리할 때 발생하는 문제점을 해결하기 위하여 LLCC 공진형 컨버터를 이용하여 공진주파수를 추적 및 일정한 전력을 공급하는 제어 방식을 제안한다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.387-388
• /
• 2016

본 논문은 V2G를 위한 Bidirectional OBC를 제안한다. 상용화 시 적시 적용 가능한 높은 역/전송 효율의 Bidirectional OBC 전력회로를 제안하고 베터리 전력을 입력원으로 분산형 전력공급 장치에서 요구하는 품질을 만족하는 전력 생산을 위해 계통연계 회로 및 제어 기술을 제안한다. Bidirectional OBC의 PFC Type은 양방향 구현을 위해 기존 MOSFET과 Diode로 구현된 구조와 달리 모두 IGBT를 이용하여 Single Phase Inverter를 구현 하였으며, IGBT 이용 시 예측되는 Reverse Recovery Loss 개선을 위하여 Hybrid Switch 구조를 제안 하였다. Bidirectional OBC의 DC/DC Type은 전송 및 역송에 따라 Buck동작과 Boost 동작이 가능하도록 설계 하였고 Secondary LC Resonant Topology 가변구조법을 사용 하였다.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.1948-1950
• /
• 1997

In this paper, we compose of the single current source inverter for utility interactive photovoltaic system. According to insert parallel resonant circuit, the do reactor decreases the distortion of dc current and output current. Therefore, we decrease the do reactance and control modulation factor to operation at the maximum power point around of solar cell.