• Structural Engineering and Mechanics
• /
• 제54권5호
• /
• pp.891-908
• /
• 2015

For a systematic study on wind-induced vibration characteristics of large hyperbolic cooling towers with different feature sizes, the pressure measurement tests are finished on the rigid body models of three representative cooling towers with the height of 155 m, 177 m and 215 m respectively. Combining the refined frequency-domain algorithm of wind-induced responses, the wind-induced average response, resonant response, background response, coupling response and wind vibration coefficients of large cooling towers with different feature sizes are obtained. Based on the calculating results, the parametric analysis on wind-induced vibration of cooling towers is carried out, e.g. the feature sizes, damping ratio and the interference effect of surrounding buildings. The discussion shows that the increase of feature sizes makes wind-induced average response and fluctuating response larger correspondingly, and the proportion of resonant response also gradually increased, but it has little effect on the wind vibration coefficient. The increase of damping ratio makes resonant response and the wind vibration coefficient decreases obviously, which brings about no effect on average response and background response. The interference effect of surrounding buildings makes the fluctuating response and wind vibration coefficient increased significantly, furthermore, the increase ranges of resonant response is greater than background response.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.976-980
• /
• 2001

In this study, P $b_{0.88}$(L $a_{a}$N $d_{l-a}$)$_{0.08}$(M $n_{1}$3/S $b_{2}$3/)$_{0.02}$ $Ti_{0.98}$ $O_3$system ceramics were manufactured for 20 MHz class resonator application. Electromechanical coupling factor, mechanical quality factor and dynamic range of 3rd overtone thickness vibration mode were measured as the variations of La and Nd molar ratio. Mechanical quality factor and dynamic range at $\alpha$=0.6 composition ceramics showed the highest value of 2, 691 and 52.37 dB, respectively. The tempearture coefficient of resonant frequency measured from -2$0^{\circ}C$ to 8$0^{\circ}C$ showed an excellent value of 5ppm/$^{\circ}C$ at $\alpha$ = 1 composition ceramics. ceramics.s.

• 한국통신학회논문지
• /
• 제26권11B호
• /
• pp.1600-1606
• /
• 2001

공기갭과 유전체 덮개층을 갖는 이방성 매질 위의 마이크로스트립 안테나의 공진 주파수에 대해 해석하였다. 이방성 매질의 구성관계식으로부터 파수영역에서의 다이애덕 그린 함수를 유도하였고 이 결과를 퓨리에 변환을 사용하여 공간에서의 전계 적분 방정식을 수식화차였다. 갈러킨 모멘트법을 사용하여 적분 방정식을 이산화하였으며 실제 전류 밀도와 가장 유사한 정현적 함수를 기저함수로 선택하였다. 수치해석 결과의 타당성을 검증하기 위해 기존의 결과와 비교, 일치된 결과를 얻었으며 공기 갭의 두게, 패치 길이, 이방성 비의 변화에 따른 공진 주파수가 제시되고 분석되었다.

• 대한전자공학회논문지TC
• /
• 제41권10호
• /
• pp.103-108
• /
• 2004

본 논문에서는 크로스 개구결합 급전 구조의 소형 GPS 단말기용 안테나를 소형화하기 위해 대칭적인 4개의 T-슬릿이 방사 패치에 부설되었다. 부설된 슬릿 주위에 표면 전류 경로의 증가는 등가적인 인덕턴스 성분을 유기하고 공진형 안테나의 저차 모드의 공진 주파수를 낮추어 안테나의 소형화 특성을 개선함을 확인하였다 슬릿 부설에 따른 공진 주파수는 2.545GHz에서 1.575GHz로 약 44.65%까지 감소시킬 수 있었으며, 안테나 소형화를 위해 부설된 슬릿이 원편파 기본 동작 모드에 미치는 영향을 법선 전기장 성분을 통해 확인하였다. 측정된 안테나의 임피던스 대역폭(VSWR≤2)과 3dB 축비 대역폭은 21MHz와 19MHz로 양호한 특성을 나타내었다.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.16-23
• /
• 2004

Acoustic characteristics of unbaffled and baffled combustion chamber are experimentally investigated under atmospheric condition to preliminarily determine baffle for mitigation of combustion instability. To investigate the effect of the baffle which has several configurations such as radial baffles and hub/blade baffle, resonant-frequency shift and damping factors of the chamber were analyzed and compared quantitatively with those of the unbaffled combustion chamber. From a view of acoustic characteristics, radial baffles with several configurations have not much difference in resonant-frequency shift and damping factor ratio with each other. On the other hand, hub and blade baffle is very effective to suppress the first tangential mode which was found to be the most harmful acoustic mode in KSR(Korean Sounding Rocket)-III engine. But more study on design parameters such as hub size and axial length should be done for complete optimization of hub and blade baffle. The present study based on linear acoustic analysis is expected to be a useful confirming tool to predict acoustic field and design a passive control devices such as baffle and acoustic cavity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.843-846
• /
• 2000

The (1-x)MgTiO$_3$-xSrTiO$_3$(x=0.02∼0.08) ceramics were fabricated by conventional mixed oxide method. The sintering temperature and time were 1250$^{\circ}C$∼1400$^{\circ}C$, 2hr., respectively. The structural and microwave dielectric properties were investigated by varying sintering temperature and composition ratio. In the (1-x)MgTiO$_3$-xSrTiO$_3$(x=0.02) ceramics, the cubic SrTiO$_3$and hexagonal MgTiO$_3$phases were coexisted. The dielectric constant was increased and the temperature coefficient of resonant frequency( $\tau_f$) was decreased with addition of SrTiO$_3$. The temperature coefficient of resonant frequency($\tau_f$) was gradually varied from negative value to positive value with increasing the SrTiO$_3$.

• ETRI Journal
• /
• 제41권3호
• /
• pp.289-297
• /
• 2019

In this paper, a wideband, circularly polarized patch antenna is proposed that leverages the unidirectional resonant modes of a circular patch mounted on top of a grounded dielectric-ferrite substrate. The proposed antenna is fed via the proximity coupling method and several parasitically coupled patches are placed on a dielectric superstrate to enhance the impedance bandwidth of the antenna. The resonant modes of the structure rotate only in the clockwise or counter clockwise directions. In the frequency range where the effective permeability of the ferrite layer is negative, the resonance frequencies of these modes differ significantly, which produces a large axial ratio (AR) bandwidth. For the proposed antenna, the numerical results show the 10 dB impedance bandwidth to be around 44% and the 3 dB axial ratio bandwidth to be higher than 64%.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.65-72
• /
• 2016

This paper discussed the LCL-type & Isolated bidirectional dc-dc converter(BDC) with dual full bridge inverter. In order to verify the analysis of the BDC, Experimental prototype has been designed and implemented to supply constant voltage regardless of loads and proposed a method to select switching frequency that depended on two inductors' inductance ratio and transformer parameters. The proposed converter has been composed of LCL resonant network with unit inductance ratio ($L_r/L_f$=1) and then operated with fixed duty, 50% duty ratio and fixed frequency. There are some characteristics that input voltage and output voltage of the BDC is nearly identical and zero voltage turn-on switching is possible in forward and reverse mode. Finally, it has been showed that BDC is possible to commutate operating mode normally and provide constant output voltage in selected switching frequency.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.909-914
• /
• 2006

Vibration isolation tables are mostly required in precise measurement and manufacturing system. Among the vibration isolation tables, an air spring is the most favorable equipment because of low resonant frequency and high damping ratio. However, it is difficult to design the air spring with the required stiffness and damping ratio. Futhermore, whenever conventional active control methods are applied to the air spring, it may be difficult to obtain effective control performance due to high nonlinearity of air spring. In this paper, the optimal design of the air spring is performed using genetic algorithm to bring out low resonant frequency and high damping ratio. Also, active control of the vibration isolation table with 3-DOF model is proposed using the adaptive control method. Through experiments, optimal design is shown to be effective. And performance of the proposed control method is verified to be better than those of the passive control method and the conventional active control methods.

• 한국전기전자재료학회논문지
• /
• 제13권12호
• /
• pp.1011-1016
• /
• 2000

The (1-x)MgTi $O_3$-xSrTi $O_3$(x=0.02~0.08) ceramics were fabricated by the conventional mixed oxide method. The sintering temperature and time were 125$0^{\circ}C$~1375$^{\circ}C$ and 2hours. The structure and microwave dielectric properties were investigated with sintering temperature and composition ratio. From the X-ray diffraction patterns, the cubic SrTi $O_3$and hexagonal MgTi $O_3$structures were coexisted in the (1-x)MgTi $O_3$-xSrTi $O_3$(x=0.02~0.08) ceramics. The dielectric constant($\varepsilon$$_{r}$) was increased and the temperature coefficient of resonant frequency($\tau$$_{f}$)was decreased with addition of SrTi $O_3$. The temperature coefficient of resonant frequency($\tau$$_{f}$) was gradually varied from negative value to positive value with increasing SrTi $O_3$. In the case of 0.96MgTi $O_3$-0.04SrTi $O_3$ceramics sintered at 130$0^{\circ}C$, the dielectric constant, quality factor and temperature coefficient of resonant frequency were 20.5, 5918(at 7.33GHz) and +10ppm/$^{\circ}C$, respectively.y.y.y.