• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.157-157
• /
• 2015

Recently, the growing interest in organic microelectronic devices including OLEDs has led to an increasing amount of research into their many potential applications in the area of flexible electronic devices based on plastic substrates. However, these organic devices require a gas barrier coating to prevent the permeation of water and oxygen because organic materials are highly susceptible to water and oxygen. In particular, high efficiency OLEDs require an extremely low water vapor transition rate (WVTR) of $1{\times}10^{-6}g/m^2day$. The Key factor in high quality inorganic gas barrier formation for achieving the very low WVTR required ($1{\times}10^{-6}g/m^2day$) is the suppression of defect sites and gas diffusion pathways between grain boundaries. In this study NBAS process was introduced to deposit enhanced film density single gas barrier layer with a low WVTR. Fig. 1. shows a schematic illustration of the NBAS apparatus. The NBAS process was used for the $Al_2O_3$ nano-crystal structure films deposition, as shown in Fig. 1. The NBAS system is based on the conventional RF magnetron sputtering and it has the electron cyclotron resonance (ECR) plasma source and metal reflector. $Ar^+$ ion in the ECR plasma can be accelerated into the plasma sheath between the plasma and metal reflector, which are then neutralized mainly by Auger neutralization. The neutral beam energy is controlled by the metal reflector bias. The controllable neutral beam energy can continuously change crystalline structures from an amorphous phase to nanocrystal phase of various grain sizes. The $Al_2O_3$ films can be high film density by controllable Auger neutral beam energy. we developed $Al_2O_3$ high dense barrier layer using NBAS process. We can verified that NBAS process effect can lead to formation of high density nano-crystal structure barrier layer. As a result, Fig. 2. shows that the NBAS processed $Al_2O_3$ high dense barrier layer shows excellent WVTR property as a under $2{\times}10^{-5}g/m^2day$ in the single barrier layer of 100nm thickness. Therefore, the NBAS processed $Al_2O_3$ high dense barrier layer is very suitable in the high efficiency OLED application.

• Journal of Applied Biological Chemistry
• /
• v.53 no.2
• /
• pp.77-81
• /
• 2010

The seed of cowpea (Vigna sinensis K.) was extracted with 80% aqueous methanol (MeOH). And the concentrated extract was partitioned with ethyl acetate (EtOAc), n-butanol (n-BuOH) and $H_2O$, successively. The repeated silica gel and octadecyl silica gel (ODS) column chromatographic separations for the EtOAc and n-BuOH fractions led to isolation of four sterols. And the chemical structures of the compounds were determined as a mixture of stigmasterol and $\beta$-sitosterol with the ratio of 4 to 3 (1), 7-ketositosterol (2), and stigmasterol 3-O-$\beta$D-glucopyranoside (3) from the interpretation of spectroscopic data including nuclear magnetic resonance (NMR) spectrum metric, mass (MS) spectrum metric and infrared (IR) spectroscope. This study reports the first isolation of $\beta$-sitosterol, 7-ketositosterol, and stigmasterol 3-O-$\beta$-D-glucopyranoside from the seed of Vigna sinensis K. In addition, compound 2, 7-ketositosterol, is rarely occurred in natural source including plant.

• Journal of Applied Biological Chemistry
• /
• v.58 no.2
• /
• pp.153-155
• /
• 2015

The root barks of Morus alba L. were extracted with 80% aqueous MeOH, and the concentrated extract was partitioned with EtOAc, n-BuOH, and $H_2O$ fractions. The repeated silica gel, octadecyl silica gel, and Sephadex LH-20 column chromatographies of the EtOAc and n-BuOH fractions led to isolation of four phenolic compounds. The chemical structures of the compounds were determined as norartocarpanone (1), 2',4',7-trihydroxy-(2S)-flavanone (2), methyl ${\beta}$-resorcylate (3), and (Z)-oxyresveratrol-4-O-${\beta}$-$\small{D}$-glucopyranoside (4). Compound 4 was isolated for the first time from the root barks of M. alba L.

• Journal of Applied Biological Chemistry
• /
• v.54 no.1
• /
• pp.63-66
• /
• 2011

The bark of Machilus thunbergii was extracted with 80% aqueous methanol (MeOH), and the concentrated extract was partitioned using ethyl acetate (EtOAc), butanol (n-BuOH), and $H_2O$, successively. From the EtOAc fraction, five lignans were isolated through the repeated silica gel, octadecyl silica gel (ODS) and, Sephadex LH-20 column chromatography. Based on nuclear magnetic resonance (NMR), mass spectroscopy (MS), and infrared spectroscopy (IR) spectroscopic data, the chemical structures of the compounds were determined to be machilin A (1), machilin F (2), licarin A (3), nectandrin A (4), and nectandrin B, (5). This study presents comparative account of five lignans from M. thunbergii bark contributing inhibition of low density lipoprotein (LDL), ACAT-1, and ACAT-2. Compounds 2-5 showed varied degree of antioxidant activity on LDL with $IC_{50}$ values of 2.1, 11.8, 15.3, and $4.1{\mu}M$. Compounds 1, 2, and 3 showed inhibition activity on ACAT-1 with values $63.4{\pm}6.9%$ ($IC_{50}=66.8{\mu}M$), $53.7{\pm}0.9%$ ($IC_{50}=109.2{\mu}M$), and $78.7{\pm}0.2%$ ($IC_{50}=40.6{\mu}M$), respectively, at a concentration of 50 mg/mL, and on ACAT-2 with values $47.3{\pm}1.5%$ ($IC_{50}=149.7{\mu}M$), $39.2{\pm}0.2%$ ($IC_{50}=165.2{\mu}M$), and $52.1{\pm}1.0%$ ($IC_{50}=131.0{\mu}M$, respectively, at a concentration of 50 mg/mL.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1259-1267
• /
• 2019

Anti-inflammatory and anti-oxidative activities were examined on the extract of Dendranthema indicum (D. indicum) flowers. The flowers were extracted two times for 24 h each with 70% ethanol. Upon the biological activities screening, the ethanol extract exhibited potent free radical scavenging activities and inhibited the production of nitric oxide on LPS-induced RAW264.7 macrophages effectively without causing cell toxicity. Further purification by medium pressure liquid hromatography (MPLC) and identification of the isolates led to identification of cynaroside (1) and apigetrin (2). The chemical structures of the isolated compounds were elucidated based on spectroscopic data including nuclear magnetic resonance (NMR) spectra, as well as comparison of the data to the literature values. Also, the quantitative analysis of the compounds was perfromed by high-performance liquid chromatography (HPLC). The isolates 1 and 2 were determined to inhibite the nitric oxide (NO) production dose-dependently. Based on these results, it was suggested that D. indicum extract could be useful as anti-inflammatory agents in cosmetics applications.

• Geotechnical Engineering
• /
• v.7 no.1
• /
• pp.41-52
• /
• 1991

A study of the effects of dynamic pile-soil-structure interactions on the response of super- structures, supported by group piles, are presented in this paper. The dynamic impedance functions of single pile generated by soil-pile interactions are obtained and compared among others using the methods proposed by Novak, Gazetas, and Kuhlemeyer, and using the equivalent cantilever method. Group pile effects are also considered by the following approaches : neglecting interaction effects : group efficiency ratio concept : static interaction approach . and dynamic interaction approach. The responses of a nuclear containment structure are obtained by using the elastic half-space analysis, based on the impedance functions mentioned above. Main conclusions drawn from this study are as follows : 1. The numerical results of the impedance functions calculated by each method were quite different : the Novak's was the smallest, and the Kuhlemeyer's the highest. Considering group effects, similar values in each approach were obtained for the stiffness : the difference was very big for the damping. 2. The top displacement of the structure was reduced by 20% or more by pile installations. However, the base shear force, the base moment, and the resonance frequency were increased by more than two times due to stiffening effect of the ground by pile installations. 3. Whether frequency dependant impedence functions or frequency independant functions were used, the responses of the structure were not so much affected by the choice of the impedance functions. 4. The reduction effect of the top displacement increased with the increase of the maximum ground acceleration.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.383-389
• /
• 2020

Mesoporous silica solid catalysts modified with sulfonic acid were prepared for cationic ring-opening polymerization of octamethylcyclotetrasiloxane (D₄). Two sets of MCM-41 (1.7 and 2.8 nm) and SBA-15 (8.1 and 15.9 nm) with different pore sizes were used as catalyst supports. The surface of silica materials was modified with (3-mercaptopropyl)trimethoxysilane by silylation reaction and oxidized to sulfonic acid. The structures of the prepared catalysts were examined by X-ray diffraction and nitrogen adsorption-desorption. The pore size, specific surface area, and pore volume of the modified solid catalysts decreased slightly. In addition, the modification of the sulfonic acid on the silica surface was confirmed by using infrared spectroscopy and nuclear magnetic resonance spectroscopy. To observe the effect of the particle size on the catalytic activity, it was observed with a scanning electron microscope. The catalysts were used to synthesize PDMS through a ring-opening polymerization of D₄, and the conversion and polymerization rate of the polymerization reaction depended on the pore size, specific surface area, particle size, and particle agglomeration of the catalysts. In order for the polymerization rate, the catalyst prepared with SBA-15 of 8.1 nm pore size had the fastest reaction rate and showed the best catalytic activity.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.1
• /
• pp.8-18
• /
• 2000

We presented a BGA(Ball Grid Array) package for RF circuit modules and extracted its electrical parameters. As the frequency of RF system devices increases, the effect of its electrical parasitics in the wireless communication system requires new structure of RF circuit modules because of its needs to be considered of electrical performance for minimization and module mobility. RF circuit modules with BGA packages can provide some advantages such as minimization, shorter circuit routing, and noise improvement by reducing electrical noise affected to analog and digital mixed circuits, etc. We constructed a BGA package of ITS(Intelligent Transportation System) RF module and measured electrical parameters with a TDR(Time Domain Reflectometry) equipment and compared its electrical parasitic parameters with PCB RF circuits. With a BGA substrate of 3${\times}$3 input and output terminals, we have found that self capacitance of BGA solder ball is 68.6fF, and self inductance 146pH, whose values were reduced to 34% and 47% of the value of QFP package structure. S11 parameter measurement with a HP4396B Network Analyzer showed the resonance frequency of 1.55GHz and the loss of 0.26dB. Routing length of the substrate was reduced to 39.8mm. Thus, we may improve electrical performance when we use BGA package structures in the design of RF circuit modules.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.69-74
• /
• 2017

In this study, cholesteryl 4-n-alkoxybenzoates (Chol-n), with alkyl groups used for controlling the temperature of transition to the liquid crystal phase, were synthesized, and the effects of the length of the alkyl groups on the physical properties of the liquid crystal compounds were investigated. The chemical structures and thermal and liquid crystalline properties of the synthesized compounds were investigated by Fourier transform infrared spectroscopy (FT-IR), proton nuclear magnetic resonance spectroscopy ($^1H$-NMR), differential scanning calorimetry (DSC), and polarizing optical microscopy (POM). The synthesized compounds showed melting transition temperatures ($T_m$) in the range of $103^{\circ}C$ to $143^{\circ}C$ and all of the compounds except Chol-6 exhibited a wide liquid crystal phase temperature range of about $60^{\circ}C$ to $100^{\circ}C$. No correlation between the number of carbon atoms in the molecule and the thermal properties of the compounds was found. All of the synthesized compounds showed an enantiotropic cholesteric phase, which was accompanied by a chiral smectic phase in the compounds Chol-6, Chol-8, Chol-9, and Chol-10. All of the compounds exhibited thermochromism in the liquid crystal state, and their color changed from red to blue as the temperature was increased.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.8
• /
• pp.1208-1213
• /
• 2016

Advanced glycation end product (AGE) formation and reactive oxygen species are potential therapeutic targets for the prevention of diabetic nephropathy and other pathogenic complications. Activity-guided isolation of an ethylacetate-soluble portion of 80% methanolic extract from fruits of Sorbus commixta of the Ulleung Island origin using AGE formation inhibition assay led to the isolation and identification of three caffeoylquinic acid derivatives of a previously known structure, 3-O-caffeoylquinic acid (neochlorogenic acid; 1), 4-O-caffeoylquinic acid (cryptochlorogenic acid; 2), and 5-O-caffeoylquinic acid (chlorogenic acid; 3). The structures of these compounds were confirmed by interpretation of nuclear magnetic resonance and mass spectrometry data. Among the isolates, the major metabolite, neochlorogenic acid (1) showed the most potent inhibitory effect against AGE formation with an $IC_{50}$ value of $167.5{\pm}3.5{\mu}M$. Furthermore, all isolated chlorogenic acid isomers were evaluated for their radical scavenging activity against peroxynitrite, and structurally related isomers 1, 2, and 3 exhibited potent inhibitory effects in this radical scavenging assay. This result suggests that the monocaffeoyl quinic acid derivatives isolated from S. commixta might be beneficial for the regulation of diabetic complications and related diseases.