• 한국임상수의학회지
• /
• 제40권5호
• /
• pp.370-374
• /
• 2023

Oral melanoma is the most common type of oral tumor in dogs. In this report, computed tomography (CT) and magnetic resonance imaging (MRI) were performed to diagnose a right oral pigmented mass in an 8-year-old dog. The oral mass appeared as a homogeneous soft tissue density parenchyma on pre-contrast CT images, and with heterogeneous enhancement on post-contrast images. Bone destruction of the right mandibular body around the mass and mild enlargement of the right mandibular lymph node were also found. On MRI, the bulky oral mass showed mixed hyperintensity and isointensity compared to the adjacent muscle, where irregular hyperintensity on T1-weighted images corresponded to hypointensity on the T2-weighted images. Based on the physical examinations and imaging results, melanoma was suspected and confirmed via fine-needle aspiration. These unique MRI signals were due to the high paramagnetic melanin content in the tumor, therefore MRI examination could be useful for diagnosis of melanoma.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권1호
• /
• pp.27-33
• /
• 1999

The classification of herniated intervertebral lumbar disc type is clinically important, as treatment method may be slightly different according to the type of herniated intervertebral disc. When 450 patients who suffered from herniated intervertebral lumbar disc were tested with Magnetic Resonance Imaging (MRI) to find out the type of herniated disc, the following findings were given : 1. The age of the patients investigated ranged from 15 to 83, and their mean age was 40. 2. The male patients were twice as many as the female patients, since the ratio of males to females was 300 : 150. 3. 118 patients suffered from a single herniated disc, and 332 patients were attacked with multi-herniated disc. 4. The types of single herniated disc were a protrusion for 50 patients (40%) and an extrusion for 40 patients (34%). The part of being herniated was an intervertebral disc between $L_4-L_5$ for 95 patients(80%) and the same disc between $L_5-S_1$ for 22 patients(19%). 5. The types of multi : -herniated disc were an protrusion for 67 patients(20%) and an extrusion for 70 patients(21%). Besides, 90 patients (28%) were the case that protrusion and extrusion coexisted simultaneously. The parts of being herniated were $L_3-L_4,\;L_4-L_5$ and $L_5-S_1$ for 53 patients(16%), $L_3-L_4$ and $L_4-L_5$ for 57 patients(17%), and $L_4-L_5$ and $L_5-S_1$ for 139 patients(42%).

• 대한구순구개열학회지
• /
• 제8권2호
• /
• pp.53-62
• /
• 2005

Submucosal type cleft palate is a kind of cleft palate. A submucosal cleft may result in shortening of the anteroposterior dimension of the hard or soft palates or both. The increased distance along with the lack of muscle connection in the soft palate usually accounts for the lack of palatopharyngeal function in patients with submucosal cleft. Resonance disorders which is found in cleft patients show hypernasality or hyponasality. Many cases of submucosal type cleft palate patients visit our clinics due to hypernasality. In this study, resonance disorders was evaluated through nasalance test. Experimental group was composed of submucosal type cleft palate patients. The patients were treated by a so-called combined therapy, i.e., operation and speech training. To observe the changing pattern by surgery, nasalance test was carried out one time before surgery and three times after surgery. Nasometer II was used as a examination. The questionaire was filled with single vowels & diphthongs. The mean nasalance score of the child was significantly lower than that of the adult at every vowel. An early age at operation (under 10 years) was that a better functional result was achieved with patients. The mean nasalance score of /i/ was highest and that of /a/ was the lowest. The result of corrective surgery in selected cases has achieved improvement in all cases. Hypernasality has been consistently diminished. he operation.

• The Journal of Advanced Prosthodontics
• /
• 제1권1호
• /
• pp.31-36
• /
• 2009

PURPOSE. To determine the change in stability of single-stage, three different design of implant systems in humans utilizing resonance frequency analysis for early healing period(24 weeks), without loading. MATERIAL AND METHODS. Twenty-five patients were included into this study. A total of 45 implants, three different design of implant systems(group A,C,R) were placed in the posterior maxilla or mandible. The specific transducer for each implant system was used. ISQ(implant stability quotient) reading were obtained for each implant at the time of surgery, 3, 6, 8, 10, 12, 24 weeks postoperatively. Data were analyzed for different implant type, bone type, healing time, anatomical locations. RESULTS. For each implant system, a two-factor mixed-model ANOVA demonstrated that a significant effect on ISQ values(group A=0.0022, C=0.017, R=0.0018). For each implant system, in a two-factor mixed model ANOVA, and two-sample t-test, the main effect of jaw position(P > .005) on ISQ values were not significant. CONCLUSIONS. All the implant groups A, C and R, the change patterns of ISQ over time differed by bone type. Implant stability increased greatly between week 0 and week six and showed slow increase between week six and six months(plateau effect).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.119-122
• /
• 2005

In this paper, we investigated the recognition range according to modulation index for the ISO(International Standards Organization) 14443 13.56MHz contactless Type B RFID(Radio Frequency IDentification) system. We measured recognition range with changing modulation index step by step from 5% to 24% where we used 4 samples of Type B transponder with different resonance frequencies between 13.838MHz and 17.200MHz. While gradually increasing a distance in vertical direction from the center of the reader antenna, we measured the distance where the transponder's PUPI(Pseudo Unique PICC(Proximity IC Card) Identifier) is recognized continuously during 10 seconds and the distance where the transponder's PUPI is recognized at least two times during 5 seconds. From the measurement results, we found that the best recognition ranges were achieved when the reader had modulation index between 11% and 14%.

• Clinics in Shoulder and Elbow
• /
• 제19권4호
• /
• pp.237-240
• /
• 2016

Retear patterns after arthroscopic rotator cuff repair are classified into two patterns according to retear location. Type 1 is when the retear pattern occurs directly on the tendon at the bone repair site using the suture anchor repair method. Type 2 is when the retear pattern occurs at the musculocutaneous junction with a healed footprint in patients who undergo the suture bridge method. Here, the authors report another retear pattern, which was identified as a type 2 retear on magnetic resonance imaging in patients who had undergone arthroscopic rotator cuff repair by the suture-bridge technique. This pattern was different from the type 2 retear and occurred at the portion of the cuff away from the healed rotator cuff under the view of the arthroscope.

• 한국자동차공학회논문집
• /
• 제11권1호
• /
• pp.64-71
• /
• 2003

In order to analyze the effect of the chemical structure and the cetane number of reformed diesel fuels by ultrasonic energy irradiation, proton nuclear magnetic resonance spectrometer$(^1H-NMR)$ was used. From the study, following conclusive remarks can be made. 1) Branch Index(BI), aromatics percentages, and alpha methyl radical$(H_{\alpha})$ of the reformed diesel fuels by ultrasonic energy irradiation decreased more than the conventional ones. 2) All the cetane numbers which were calculated from carbon type structure and hydrogen type distribution of the reformed diesel fuels increased more than the conventional ones. 3) It is more reasonable to predict cetane number equation from carbon type structure than from hydrogen type distribution. 4) BI, aromatics percentages, and $H_{\alpha}$ on both for conventional fuel and reformed diesel fuels by ultrasonic energy irradiation are inversely proportional to cetane number fur these fuels.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.838-841
• /
• 2003

The aim of the study is to scrutinize the relationship between the area of resonance and insertion loss by analyzing the characteristics of 2-port resonator. This was done through designing an air-gap type Film Bulk Acoustic Resonator (FBAR) by using CAD model for the application of bandpass filter of high-frequency band with piezoelectric thin film. Moreover, through the design of ladder-type BPF, we were able to observe changes in bandwidth, resonation, out-of-band rejection depending on the number and area of resonator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.110-113
• /
• 2001

In this paper, vibration mode of Windmill type Ultrasonic Motors was analysed. We used the ANSYS program to analysis by FEM. Vibration Mode express 20 modes as each resonance frequency. We bind nearly same modes and compress 5 modes. Windmill type Ultrasonic Motor's rotation is generated the friction of rotor at top endcap. Thus, We will find the best driving frequency that generating large friction at top endcap.

• 항공우주시스템공학회지
• /
• 제4권2호
• /
• pp.21-25
• /
• 2010

Fatigue properties of composite materials are extremely important to design durable and reliable helicopter rotor blades. However, it is very difficult to apply conventional fatigue test loads in short period. Therefore, accelerating test speed and facilitating spectrum load realization are required. In this study, we have developed a fatigue testing method that uses a resonance of simply supported beam type blade specimen. This test consists in exciting the blade specimen with a frequency that corresponds to its natural frequency. In that case, the test specimen similar to a beam fixed between two pivot points starts vibrating and is significantly deformed. Resonant fatigue tests were performed by changing exciting vertical amplitude and frequency, and S-N curves of each composite materials were successfully obtained.