• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.497-500
• /
• 1987

A new concept in resolver-to-digital conversion is described, which is based on the digital phase locked loop(DPLL). This converter receives phase modulation and converts it into digital form using time ratio techniques. In this paper, the theories on DPLL and resolver and the design of the converter are covered.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1310-1319
• /
• 2013

Resolvers are transducers that are used to sense the angular position of rotational machines. The analog resolver is necessary to use resolver to digital converter. Among the RDC software method, angle tracking observer (ATO) is the most popular method. In an actual resolver-based position sensing system, amplitude imbalance dominantly distorts the estimate position information of ATO. Minority papers have reported position error compensation of resolver's output signal with amplitude imbalance. This paper proposes new ATO algorithm in order to compensate position errors caused by the amplitude imbalance. There is no need premeasured off line data. This is easy, simple, cost-effective, and able to work on line compensation. To verify feasibility of the proposed algorithm, simulation and experiments are carried out.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.6
• /
• pp.756-761
• /
• 2013

This paper propose the new demodulation method that can detect resolver signal's peak at the time of position estimation when the position information is required during current controller period. The proposed method is performed in a synchronous demodulation way with exciting signal and also cover a capability which can compensate the lag element of exciting signal caused by the resolver's inductive component and filter circuit. This paper carried out the experiment to investigate the validity and performance of the suggested method by using the test board made up of DSP and demodulation circuit. The test results show that the proposed method is theoretically clear and work completely as expected from making sure of sampling resolver signal's peak at the time of position estimation. In addition, Software position tracking algorithm is executed with the demodulated signals generated by the suggested method and an exact position can be estimated.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.192-200
• /
• 2018

In this study, improvements for error correction, speed, position, and rotation calculation algorithms have been proposed to be used in resolver to digital conversion (RDC) systems. The proposed open-loop system drives the resolver and uses the output signals of the resolver signal to estimate the real time position, the instant speed, and the rotation count with high resolution and accuracy even at high speeds and noise. The proposed solution implements strong features of both closed and open loop based systems while eliminating their weak points. The improvements proposed is resistant to noise owing to digital FIR filter and data averaging techniques. The implementation used for proof of concept is implemented on a hardware using an FPGA and configurable to be used by any resolver.

• Journal of Power Electronics
• /
• v.16 no.3
• /
• pp.1190-1199
• /
• 2016

This study proposes a classification and compensation algorithm of two non-ideal output signals of a resolver to reduce position errors. Practically, a resolver generates position errors because of amplitude imbalance and quadrature imperfection between the two output signals of the resolver. In this study, a digital signal processor system based on a resolver-to-digital converter is used to reconstruct the two output signals of the resolver. The two output signals, "sin" and "cos," can be represented by a unit circle on the xy-plot. The classification and compensation of the errors can be obtained by using the radius and area of the circle made by the resolver signals. The method computes the integration of the areas made by the two resolver output signals to classify and compensate the error. This system cannot be applied during transient response given that the area integration during the transient state causes an error in the proposed method. The proposed method does not need any additional hardware. The experimental results verify the effectiveness of the proposed algorithm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1406-1409
• /
• 2004

The Resolver usually used in industry is the absolute angle analog sensor that must be in order to driving BLDC (brushless DC) motor, and it needs RDC(Resolver-to-Digital converter) for changing the output signal to digital to be applied to the SVPWM(Space Vector Pulse Width Modulation) algorithm. Commonly used S/W RDC needs trigonometric function. What it takes a lot of calculation time of processor is gotten at weak point. In this paper, S/W RDC is realized except trigonometric functions as a result of feedback resolver outputs after filtering using FIR filter. thus, processing time is reduced. So, One-chip DSP Controller operating the Vector Control, RDC, and SVPWM can be designed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.8
• /
• pp.893-901
• /
• 1992

In this paper, we propose a new resolver-to digital(R/D) conversion method, in which a bang-bang type phase comparator is employed for fast tracking. We eliminate from the R/D conversion loop the low-pass filter which is needed to reject carrier signal and noise. Instead, we employ two prefilters outside the R/D conversion loop that take the role of the low-pass filter. Thereby, we can construct a fast and accurate tracking R/D converter. Some simulation and experimental results as well as mathematical performance analysis are presented to demonstrate the superior tracking performance of our R/D converter over conventional tracking R/D converters.

• Proceedings of the KIPE Conference
• /
• 2012.11a
• /
• pp.113-114
• /
• 2012

영구자석 동기전동기(PMSM)를 제어 하기 위해서는 정확한 회전자 위치 검출장치가 필요하다. 일반적으로 위치 검출을 위한 장치로는 엔코더와 레졸버가 사용된다. 정확한 회전자의 위치를 검출하기 위해서는 엔코더보다 레졸버를 사용하게 되는데 레졸버를 사용하기 위해서는 RDC(Resolver-to-Digital Converter)가 필요하게 된다. 본 논문에서는 RDC회로를 사용하지 않고 회전자의 위치 검출을 위한 인터페이스를 구상하였고 RDC회로를 사용하지 않아도 동일 한 성능을 보인다는 것을 실험을 통하여 검증하였다.

• Journal of Power Electronics
• /
• v.18 no.2
• /
• pp.432-444
• /
• 2018

This paper presents a capacitor voltage balancing topology using a three-level boost converter (TLBC) for a neutral point clamped (NPC) three-level inverter fed surface permanent magnet synchronous motor drive (SPMSM). It enhanced the performance of the drive in terms of its voltage THD and torque pulsation. The main attracting feature of the proposed control is the boosting of the input voltage and at the same time the balancing of the capacitor voltages. This control also reduces the computational complexity. For the purpose of close loop vector control, a software based cost effective resolver to digital converter RDC-less estimation is implemented to calculate the speed and position. The proposed drive is simulated in the MATLAB/SIMULINK environment and an experimental investigation using dSPACE DS1104 validates the proposed drive system at different operating condition.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.778-779
• /
• 2015

전동기의 위치센서로 Variable Reluctance(VR) 레졸버의 구동 방식은 1차 권선에 여자신호가 인가됨과 동시에 2차 권선 COS, SIN의 유기된 기전력을 발생시키며, RDC(Resolover-to-Digital Converter)를 이용함으로써 위치 신호를 출력한다. 위치센서로서의 레졸버는 전동기 회전자의 정확한 위치를 정밀하게 측정하는 것이 중요하다. 그러나 다양한 외란으로 인해 위치 정보의 오차가 발생하며 레졸버 설계시 회전자 형상에 따라 오차가 다르게 나타난다. 본 논문은 레졸버의 설계 및 특성 해석을 용이하게 하기 위해 Visual Basic tool을 이용하여 자동화 설계 및 특성 해석 프로그램을 구성하였다. 또한 프로그램을 이용하여 레졸버 회전자 형상 변화에 따른 인덕턴스 변화로 유기된 전압의 크기변화와 그에 따른 위치 오차율을 분석하였다.