• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.6
• /
• pp.1881-1900
• /
• 2014

Since 802.11 wireless LANs are so widely used, it has become common for numerous access points (APs) to overlap in a region, where most of those APs are managed individually without any coordinated control. This pattern of wireless LAN usage is called the private OBSS (Overlapping Basic Service Set) environment in this paper. Due to frame collisions across BSSs, each BSS in the private OBSS environment suffers severe performance degradation. This study approaches the problem from the perspective of congestion control rather than noise or collision resolution. The retry limit, one of the 802.11 attributes, could be used for traffic control in conjunction with TCP. Reducing the retry limit causes early discard of a frame, and it has a similar effect of random early drops at a router, well known in the research area of congestion control. It makes the shared link less crowded with frames, and then the benefit of fewer collisions surpasses the penalty of less strict error recovery. As a result, the network-wide performance improves and so does the performance of each BSS eventually. Reducing the retry limit also has positive effects of merging TCP ACKs and reducing HOL-like blocking time at the AP. Extensive experiments have validated the idea that in the OBSS environment, reducing the retry limit provides better performance, which is contrary to the common wisdom. Since our strategy is basically to sacrifice error recovery for congestion control, it could yield side-effects in an environment where the cost of error recovery is high. Therefore, to be useful in general network and traffic environments, adaptability is required. To prove the feasibility of the adaptive scheme, a simple method to dynamically adjust the value of the retry limit has been proposed. Experiments have shown that this approach could provide comparable performance in unfriendly environments.

• Membrane and Water Treatment
• /
• v.2 no.4
• /
• pp.251-266
• /
• 2011

This work deals with the use of High Resolution Scanning Electron Microscopy (HRSEM) to verify ultrafiltration membrane selectivity at the end of the production line as well as membrane ageing. The first part of this work is focused on new membranes. It is shown that it is better to use sputtering metallization than vacuum deposition, as this latter technique entails thermal damage to the skin layer. Moreover, the impact of the metallization layer on the determination of the membrane pore size is studied and it is observed that no impact of the metallization step can be clearly defined for a metallization layer ranging from 3 to 12 nm. For example, an average pore size of 16.9 nm and a recovery rate of 6.5 % are observed for a 150 kDa cellulose acetate membrane. These results are in agreement with those given by the manufacturer: pore size ranging from 10 to 15 nm and recovery rate ranging from 5 to 10 %. The second part of this work focuses on the study of membrane ageing. A PVDF hollow fibre membrane is studied. It is shown that a 65 % decrease in the permeate flux can be linked to a decrease in the number of pores at the surface of the membrane and a decrease in the recovery rate. In conclusion, a mapping of the pores is performed for several new hollow fibre membranes used to produce drinking water, made of different materials, with different geometries and molecular weight cut-off. These results provide reference data that will help better understand the phenomena of membrane fouling and membrane ageing.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_2
• /
• pp.1095-1106
• /
• 2019

Damage of forest fire should be investigated quickly and accurately for recovery, compensation and prevention of secondary disaster. Using remotely sensed data, burn severity is investigated based on the difference of reflectance or spectral indices before and after forest fire. Recently, the use of high resolution satellite and UAV imagery is increasing, but it is not easy to obtain an image before forest fire that cannot be predicted where and when. This study tried to analyze availability of high-resolution images and supervised classifiers on the burn severity classification. Two supervised classifiers were applied to the KOMPSAT-3A image and the UAV multispectral image acquired after the forest fire. The maximum likelihood (MLH) classifier use absolute value of spectral reflectance and the spectral angle mapper (SAM) classifier use pattern of spectra. As a result, in terms of spatial resolution, the classification accuracy of the UAV image was higher than that of the satellite image. However, both images shown very high classification accuracy, which means that they can be used for classification of burn severity. In terms of the classifier, the maximum likelihood method showed higher classification accuracy than the spectral angle mapper because some classes have similar spectral pattern although they have different absolute reflectance. Therefore, burn severity can be classified using the high resolution multispectral images after the fire, but an appropriate classifier should be selected to get high accuracy.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.11
• /
• pp.1541-1544
• /
• 2002

The concentration of B in steels is important due to its influence on mechanical properties of steel such as hardenability, hot workability, and creep resistance. An analytical method has been developed to determine B in steel samples by high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS). National Institute of Standard and Technology Standard Reference Material (NIST SRM) 348a was analyzed to validate the analytical method. The steel sample was digested in a centrifuge bottle with addition of aqua regia and $^{10}B$ spike isotope. Sample pH was then adjusted to higher than 10 to precipitate most matrix elements such as Fe, Cr, and Ni. After centrifugation, the supernatant solution was passed through a cation exchange column to enhance the matrix separation efficiency. B recovery efficiency was about 37%, while matrix removal efficiency was higher than 99.9% for major matrix elements. The isotope dilution method was used for quantification and the determined B concentration was in good agreement with the certified value.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2008.03a
• /
• pp.5-5
• /
• 2008

Spinoglenoid cyst of the shoulder is a rare clinical entity and several treatment modalities have been reported. Recently, arthroscopy is effectively used via communication hole or posterior capsulotomy through the glenohumeral joint. With this method, the complete cystectomy is impossible if the cyst is a large size or extended anteriorly and there are few reports about such cases. We present extra-articular complete cystectomy through bursal space in 3 cases of huge and anteriorly extended spinoglenoid cysts. All patients were able to return to work with no restrictions and 2 patients who performed the follow up MRI demonstrated complete resolution of the cyst and some recovery of the mass of infraspinatus muscle.

• International Journal of Advanced Culture Technology
• /
• v.8 no.3
• /
• pp.73-83
• /
• 2020

In this study, the stress and experience of overcoming stress by on-site missionaries who rescue North Korean defectors was investigated in depth through a phenomenological approach. To this end, 7 missionaries with more than 5 years of experience in North Korean missionary mission were selected, and in-depth interviews and written interviews were conducted once. The collected data were analyzed through the phenomenological research methods of Giorgi and Colaizzi. The results were categorized into 'calling and obedience', 'mission and stress', 'anxiety situation and stress', 'stress situation and frustration', 'stress experience and psychological change', 'self insight and overcoming stress', 'resolution and recovery of stress', and 'new determination and rededication'. By researching and analyzing the stress and stress experience of the missionaries who rescue North Korean defectors in the field, this study has significance for helping missionaries continue to help them through managing and overcoming their stress.

• YAKHAK HOEJI
• /
• v.23 no.3_4
• /
• pp.181-186
• /
• 1979

A high performance liquid chromatograpic procedure is described for determining ginseng saponins such as ginsenoside-Rb1, -Rb2, -Rc, -Rd, -Re, -Rf, -Rg1, and-Rg2. Ginseng saponins extracted with 90% methanol and water-saturated butanol were compared with pure standard ginsenosides. The resolution of the saponins was satisfactory and detection limit for each saponin was about 5.mu.g. Separation of the saponins was accomplished using a .mu. Bondapak carbohydrate analysis column, mobile phase of acetonitrile-water-butanol (80:20:15) and differential refractive index (RI) detector. The reproducibility and the recovery were also studied. This method was applied for determining the saponin contents of several parts of leaf, fresh ginseng, white ginseng, and red ginseng.

• ETRI Journal
• /
• v.25 no.4
• /
• pp.253-257
• /
• 2003

This study investigated the photochromic properties and characterization of acetyl-substituted diarylethene (DAMBTF6)-doped fluoroacrylates media for holographic storage. For the rewritable holographic recording media, we prepared photochromic polymer films using an acrylate matrix by simple photocuring methods. Switching light sources from a visible (532 nm) to an ultraviolet (365 nm) produced transparent films that changed from pale yellow to red. Holographic recording was performed on the photochromic films by two interfering collimated plane wave beams. Excitation with a visible or ultraviolet light completely erased the records, and the film was rewritable either by 532 nm laser or by 325 nm laser within 2 seconds. Images were recorded onto a pixelated spatial light modulator with rectangular pixel apertures and reconstructed on the photochromic films to show recovery of the original images with high resolution.

• Journal of Ship and Ocean Technology
• /
• v.8 no.2
• /
• pp.20-28
• /
• 2004

A dynamic-thermodynamic sea ice model with 50-km spatial and 24-hour temporal resolution is used to investigate the spatial and long-term temporal variability of the sea ice cover the Arctic Basin. The model satisfactorily reproduces the averaged main characteristics of the sea ice and the sea ice extent in the Arctic Basin and its decrease in early 1990th. At times model allows to suppose partial recovery of sea ice cover in the last years of twenty century. The employment of explicit form for description of ridging gives opportunity to assume that the observed thinning is the result of reduction the intensity of ridging processes and to estimate long-term variability of probability the ridge free navigation in the different parts of the Arctic Ocean including the North Sea Route area.

• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.204-211
• /
• 2016

Oil pollution seriously endangers the biological environment and human health. Due to the diversity of oils and the complexity of oil composition, it is of great significance to identify the oil contaminants. The 3-D fluorescence spectrum combined with a second order correction algorithm was adopted to measure an oil mixture with overlapped fluorescence spectra. The self-weighted alternating trilinear decomposition (SWATLD) is a kind of second order correction, which has developed rapidly in recent years. Micellar solutions of #0 diesel, #93 gasoline and ordinary kerosene in different concentrations were made up. The 3-D fluorescence spectra of the mixed oil solutions were measured by a FLS920 fluorescence spectrometer. The SWATLD algorithm was applied to decompose the spectrum data. The predict concentration and recovery rate obtained by the experiment show that the SWATLD algorithm has advantages of insensitivity to component number and high resolution for mixed oils.