• 대한전자공학회논문지SD
• /
• 제44권4호
• /
• pp.32-42
• /
• 2007

[ $0.35{\mu}m$ ]twin-well non-epitaxial CMOS 공정에서의 substrate noise에 의한 아날로그 회로의 성능 저하를 예측하기 위하여 substrate 저항을 모델링하였다. Substrate 저항 모델 방정식은 P+ guard-ring isolation에 적용되어 측정값과 일치함을 확인하였다. Substrate 저항을 네 가지 형태로 구분하고 각각에 대하여 semi-empirical 모델 방정식을 확립하여, 측정값과 비교하여 rms 오차가 10% 미만이 되었다. 이 substrate 저항 모델을 guard-ring에 의한 isolation 구조에 적용하기 위하여 모델 방정식과 ADS(Advanced Design System) 회로 시뮬레이션에 의한 결과와 Network Analyzer의 측정 결과를 비교하였고, 비교적 잘 일치함을 확인하였다.

• 대한조선학회논문집
• /
• 제51권4호
• /
• pp.321-327
• /
• 2014

A wide scope of numerical simulations was performed to predict model-ship resistances by using STAR-CCM+ and OpenFOAM. The numerical results were compared with experimental measurements in towing tank to analyze statistical reliability of the present simulations. Based on the normal distribution of resistance errors in 113 cases of container carriers, tankers and very large crude-oil carriers, the confidence intervals of numerical error were estimated as [-2.64%,+2.32%] and [-1.82%, +1.87%] with 95% confidence in STAR-CCM+ and OpenFOAM, respectively. The resistance errors of liquefied natural gas carriers with single- and twin-skeg were confident in the ranges of [-2.51%,+2.64%] and [-2.29%, +1.46%], respectively. The grid uncertainty of resistance coefficients for KCS was also quantitatively analyzed by using a grid verification procedure. The grid uncertainty of OpenFOAM (5.1%) was larger than 4.4% uncertainty of STAR-CCM+ although OpenFOAM provided statistically more confident results than those of STAR-CCM+. It means that a grid system verified under a specific condition does not automatically lead to statistical reliability in general cases.

• 조명전기설비학회논문지
• /
• 제20권10호
• /
• pp.27-34
• /
• 2006

본 논문은 드라이브의 간적벡터제어에서 ANN을 이용하여 유도전동기의 회전자 저항을 온라인 추정하기 위한 새로운 기법을 제시한다. 약전파 알고리즘은 신경회로망의 학습을 위해 사용된다. 신경회로망의 실제 상태값과 유도전동기의 요구값 사이의 오차는 신경회로망 모델의 하중값 조절을 위하여 역전파 하여 실제값이 요구값을 추정하도록 한다. 드라이브의 회전자 저항, 토크, 자속응답 성능등 이러한 추정기의 성능은 고유값으로부터 회전자 저항을 연구하게 된다. 회전자 저항은 유도전동기 드라이브의 벡터제어에서 제시된 ANN을 사용하여 추정한다.

• 대한전자공학회논문지SD
• /
• 제40권5호
• /
• pp.290-297
• /
• 2003

전자와 정공의 온도 관련 이온화 계수로부터 추출한 온도 함수의 유효 이온화 계수 및 전자 이동도를 이용하여 실리콘 전력 MOSFET의 항복 전압과 on 저항을 위한 온도 함수의 해석적 표현식을 유도하였다. 온도 함수의 해석적 항복 전압 결과를 4x10/sup 14/ cm/sup -3/, 1x10/sup 15/ cm/sup -3/, 6x10/sup 16/ cm/sup -3/의 도핑 농도에 대해 각각 실험 결과와 비교하였고, 온도 및 항복 전압 함수의 on 저항 변화도 각각 실험 결과와 비교하였다. 각농도에 따른 온도 함수의 해석적 항복 전압은 77∼300k의 온도 범위에서 실험 결과와 10% 이내의 오차로 잘 일치하였다.

• 한국정보전자통신기술학회논문지
• /
• 제7권1호
• /
• pp.40-44
• /
• 2014

저항형 바이오 센서를 인터페이싱하기 위해 브릿지 저항 편차-주기 변환기를 제안한다. 이 변환기는 선형 OTA(linear operational transconductance amplifier)와 전류-제어 발진기(current-controlled oscillator)로 구성된다. 브릿지 옵셋저항이 $1k{\Omega}$일 때, 프리러닝 주기는 1.824 ms이다. 변환기의 변 환 감도는 $0-1.2{\Omega}$의 저항편 범위에서 $3.814ms/{\Omega}$이다. 변환 특성의 선형 에러는 ${\pm}0.004%$이내이다.

• 대한전자공학회논문지SD
• /
• 제46권6호
• /
• pp.1-5
• /
• 2009

6H-SiC 전자 및 정공의 이온화계수로부터 유효이온화계수를 추출하여 6H-SiC PN 다이오드의 항복전압과 온-저항을 위한 해석적 표현식을 유도하였다. 해석적 모형으로부터 구한 항복전압을 $10^{15}{\sim}10^{18}\;cm^{-3}$의 도핑 농도 범위에서 실험 결과와 비교하여 10% 이내의 오차로 일치하였고, 농도 함수의 온-저항의 해석적 결과도 $5{\times}10^{15}{\sim}10^{16}\;cm^{-3}$의 범위에서 이미 발표된 수치적 결과와 매우 잘 일치하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
• /
• pp.57-60
• /
• 2004

Electrical arc is the final stage of insulation breakdown and has high current density which cause heat and light in insulator. Insulator under electrical arc lost its insulating strength and eternal damages. Conventional criterion of electrical arc resistance in Standards have depended on the change of sound pressure and light color after damages on insulator by electrical arc. The recognition of these changes is done by human himself which was very subjective and resulted in some error to judge whether insulator has damages or not. This paper has shown that antenna method is the appropriate measure to judge electrical arc resistance for insulator. Antenna measures the electromagnetic waves radiated from tungsten electrodes with 6mm gap regulated by KSC2130. Applied voltage cross two tungsten electrodes have two different methods such as 1/8 10 and continuous 10mA. Signal amplitudes obtained by antenna has diminished after the damage of insulator, which will provide objective and good way to judge the electrical arc resistance.

• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.97-110
• /
• 1998

The numerical damping and dispersion error characteristics associated with difference schemes and a panel shift method used for the calculation of steady free surface flows by a panel method are an analysed in this paper. First, 12 finite difference operators used for the double model flow by Letcher are applied to a two dimensional cylinder with the Kelvin free surface condition and the numerical errors with these schemes are compared with those by the panel shift method. Then, 3-D waves due to a submerged source are calculated by the difference schemes, the panel shift method and also by a higher order boundary element method(HOBEM). Finally, the waves and wave resistance for Wigley's hull are calculated with these three schemes. It is shown that the panel shift method is free of numerical damping and dispersion error and performs better than the difference schemes. However, it can be concluded that the HOBEM also free of the numerical damping and dispersion error is the most stable, accurate and efficient.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권3호
• /
• pp.458-464
• /
• 2017

A magnetic tunnel junction (MTJ) based ternary content addressable memory (TCAM) is proposed which provides non-volatility. A unit cell of the TCAM has two MTJ's and 4.875 transistors, which allows the realization of TCAM in a small area. The equivalent resistance of parallel connected multiple unit cells is compared with the equivalent resistance of parallel connected multiple reference resistance, which provides the averaging effect of the variations of device characteristics. This averaging effect renders the proposed TCAM to be variation-tolerant. Using 65-nm CMOS model parameters, the operation of the proposed TCAM has been evaluated including the Monte-Carlo simulated variations of the device characteristics, the supply voltage variation, and the temperature variation. With the tunneling magnetoresistance ratio (TMR) of 1.5 and all the variations being included, the error probability of the search operation is found to be smaller than 0.033-%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.412-414
• /
• 1996

The rotor resistance variation has a large effect on the field oriented control system of induction machine. In this paper, the adaptation technique based on MRAC is used to identify the rotor resistance variation. The criterion function used in the adaptation algorithm is the error function of the two reactive powers of the induction motor. The one is obtained from the voltages and the currents of the stator of the induction motor. And the other is estimated from the rotor flux and stator current. We simulated this control system operated by field oriented control and assured the robustness of the induction motor control system against the rotor resistence variation.