• 대한조선학회논문집
• /
• 제32권2호
• /
• pp.68-74
• /
• 1995

선박의 초기설계 단계에서 저항 추진 성능을 손쉽고도 정확히 추정하기 위해 통계해석 기법을 유용하게 사용하고 있다. 본 연구에서는 저항추진 성능 추정 프로그램에 필요한 기능들과 데이터뱅크의 구조를 제안하였다. 개발된 프로그램에는 저항 추진 계수를 추정하기 위한 여러 가지 도표와 회귀식이 포함되어 있으며, 데이터 뱅크를 이용한 일관회귀분석도 포함되어 있다. 또한 프로펠러 주요치수와 단독효율을 추정하기 위한 프로펠러의 간략한 설계 과정도 포함되어 있다. 프로그램의 기능과 데이터 뱅크의 정도를 검증하기 위해 임의의 선형 14 척에 대한 추정을 수행하였으며, 5% 이내의 좋은 추정 정도를 보여주고 있음을 확인하였다.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.429-434
• /
• 2014

The main objective of the present study is to elucidate a correlation between ship resistances from computational fluid dynamics (CFD) and brake horse powers (BHP) from towing tank in container carriers. The tests were conducted for a range of combinations of trim conditions and speeds. To achieve this goal, 295 cases of numerical simulation have been performed using Star-CCM+ which had been statistically verified to predict ship resistances (Lee & Lee, 2014). Based on the normal distribution of resistance errors in all cases of the 4 container carriers, the confidence interval of numerical error was estimated as [-2.33%,+2.42%] with 95% confidence. The correlation coefficients between the ship resistances of CFD and the brake horse powers of the experiments were higher than 0.93. As a result, the numerical calculation of ship resistances is able to be utilized in order to provide a quick guidance in selection of the optimum loading condition.

• 전기학회논문지
• /
• 제65권5호
• /
• pp.785-793
• /
• 2016

This paper analyzes an LCL-type isolated dc-dc converter operating for constant output voltage in the continuous conduction mode(CCM) with resistances of parasitic losses-static drain-source on resistance of power switch, ESR of resonant network(L-C-L)-using a high loaded quality factor Q assumptions and fourier series techniques. Simple analytical expressions for performance characteristics are derived under steady-state conditions for designing and understanding the behavior of the proposed converter. The voltage-driven rectifier is analyzed, taking into account the diode threshold voltage and the diode forward resistance. Experimental results measured for a proposed converter at low input voltage and various load resistances show agreement to the theoretical performance predicted by the analysis within maximum 4% error. Especially in the case of low output voltages and large loads, It is been observed that introduction of both rectifier and the parasitic components of converter had considerable effect on the performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.98-99
• /
• 2007

This study has successfully demonstrated the direct fabrication of polymer resistors using ink-jet printing technology as an alternative patterning to traditional photolithography. The polymer resistors were fabricated just by two layer processes using a ink-jet printer (DMP-2800, Fujifilm Dimatix). First, resistive materials was patterned by a ink-jet printing with the desired width and length. Next, resistor fabrication was completed by printing metal contact pads on the both sides of the polymer resistor. We used poly (3,4-ethylene dioxythiophene) poly(styrenesulfonate)(PEDOT:PSS) for the resistor material and a nano-sized silver colloid for the metal contact pads. We characterized the electrical properties of PEDOT:PSS by measuring sheet resistance and specific resistance on a glass substrate. From analysis of the measured resistances, the electrical resistances of the polymer resistors linearly increased as a function of printed width and length of resistors. The accuracy of the fabricated polymer resistor showed about $0.6{\sim}2.5%$ error for the same dimensions.

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.82-90
• /
• 2019

We propose an equivalent model of a sintered metal mesh filter calculated by Ergun's equation and polynomial regression for the CFD analysis of breakaway devices at a hydrogen fueling station. CFD analysis of filters that cause high pressure loss is essential because breakaway devices in high-pressure hydrogen conditions require low pressure loss. A differential pressure experiment with a filter was performed in a low-pressure air condition considering similarities. An equivalent model was developed by deriving the resistance value by the polynomial regression using the experimental results. The results of CFD analysis using the equivalent model show that there was almost no error in the operating condition of the breakaway device compared to the experimental results. Through this work, we believe that the proposed equivalent model of a filter can be applied to the analysis of breakaway devices in hydrogen fueling stations. We will study how to optimize the shape and position of the filter in breakaway devices using the developed equivalent model.

• 한국철도학회논문집
• /
• 제15권3호
• /
• pp.237-243
• /
• 2012

3차원 유한요소법을 이용하여 엔드코일 효과를 고려한 SRM의 자계해석을 수행하였다. 고정자 극 형상에 따른 자계특성의 비교를 통하여 제안된 형상에서 자계특성이 향상됨을 확인하였다. 해석한 자계특성을 적용하여 철도부하에 대한 PI 제어기와 슬라이딩모드 제어기의 속도제어를 수행하였다. 속도 제어 시뮬레이션은 Matlab-Simulink를 사용하여 구현되었으며 부하 가변 조건에서 슬라이딩모드 제어기가 PI 제어기에 비해 더 우수한 과도응답 및 정상상태응답을 나타냄을 확인하였다.

• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.159-163
• /
• 2019

최근 생활수준의 향상으로 외식문화가 발전하고 있고 온라인과 오프라인으로도 냉동식품의 택배수요가 날로 증가하고 있다. 현재 이러한 식품유통의 대부분은 냉동차량에 의해서 이루어지고 있다. 냉동차량에서 가장 중요한 요소 중에 하나는 정확히 온도를 측정하는 것이다. 기존의 상용 온도 기록 시스템은 일반적으로 온도 센서 모듈을 기록계에 직접 연결하는 형태이다. 이러한 기존의 방법은 전선을 사용하여 기록계에 온도 데이터를 전송하기 때문에 케이블의 길이에 따라 저항 오차를 보상해야한다. 본 논문은 케이블 내의 저항으로 인해 발생하는 오차를 극복하기 위해서 디지털 처리와 CAN (Controller Area Network) 통신을 사용하는 것을 제안한다. 또한 온도 측정의 정확도를 높이기 위해서 백금 센서인 PT-1000을 사용한다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.316-322
• /
• 2009

The more repetitive, complex and objective the work, the more effective automation is. Code checking is an example of this. Checking building codes through a thick set of drawings is error-prone and time-consuming. In order to overcome this problem, several organizations have initiated efforts to automate building-code checking. Initiated study mainly focused on checking codes for invalidation, required size and crash, and then area of checkable codes have been expanding. But, it has not been considered for codes regarding anti-disaster/egress, which is also issued these days. This study is about how to automatically check codes for anti-disaster and egress based on Korea building codes. The codes can be categorized as five sections: egress way, material/capability, principals of evacuation, evacuation stairway and fire protection partition. To check automatically, there are problems, such as expression of codes for egress and limitation of extractable information from the BIM model. This paper shows what problems exist and assignments to be resolved. Also, current developing processes are presented, and suggestions are made about the direction for the work that remains.

• 대한전자공학회논문지SD
• /
• 제41권1호
• /
• pp.47-52
• /
• 2004

본 논문에서는 FTTH에 적용하기 적합한 넓은 입력 다이나믹 레인지와 낮은 비트 에러율을 갖는 CMOS 광수신기의 설계를 제안한다. 트랜스임피던스 전치증폭기의 PMOS 피드백 저항을 자신의 출력 신호의 크기에 따라 제어하여 100Mbps까지 60dB의 입력 다이나믹 레인지를 얻었다. 듀티 에러를 최소화시키기 위해 전류 거울 형태의 자동 바이어스 조절 회로를 설계하였다. 2-폴리, 3-메탈, 0.6um CMOS 공정 파라미터를 사용하여 회로 시뮬레이션을 수행하였다. 설계된 수신기는 5V의 전원을 사용할 때 100Mbps에서 130mW 이하의 전력 소비를 보였다.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.77-84
• /
• 2013

In this paper, we review two-dimensional measuring methods referring to target patterns. The patterns consist of two linearly-repeated patterns or is designed repeatedly in two-dimension. The repeated properties are reflectivity, refractivity, air-gapping distance, capacitance, magnetic reluctance, electrical resistance and sloping gradient, etc. However, the optical methods are generally used for high speed processing and density, and their encoding principles are treated here. In case of two-dimensional pattern, as there is not inherently error between single units encoding the pattern except for the metrology frame errors, the end-effector position of an object accompanying the pattern can be measured with respect of the global frame without via error. Therefore, it is regarded as a substitute for laser interferometer with severe environmental constraints and has been applied to the high-accurate planar actuator.