• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.874-880
• /
• 2007

CST와 SRF는 슬러지 탈수효율 인자로 가장 널리 사용되고 있다. 이러한 CST와 SRF는 각각의 분석특징의 장.단점으로 인해 실험방법 및 결과 해석시, 슬러지 탈수의 최적조건을 찾아 예측하는데 어려움이 있다. 따라서 본 연구는 탈수성 지표로 이용되는 CST와 SRF의 이론식 가운데 CST와 SRF의 상호관계식을 유도하여 각각의 실측값과 예측값을 비교한 후 비교적 측정이 간편한 CST 시험만으로도 탈수최적조건을 도출할 수 있는 이론식을 검토하였다.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.232-243
• /
• 2009

근래 고성능 친환경 타이어의 개발요구에 의하여 경제성(낮은 회전 저항)과 안전성(wet traction) 및 내마모성면에서 균형있는 특성을 가지는 타이어 트레드 고무의 합성 제조 기술이 중요하게 대두된다. 이를 위하여 다양한 기능성 용액중합 SBR의 개발과 함께 고무/충전제 간의 상호작용 증진 기술이 학술적으로나 산업적으로 활용되고 있다. 본 고에서는 기존의 카본블랙 고무와 함께 최근 green tire로서 각광 받는 실리카 충전 고무에서 충전제와 상호반응이 가능한 화학적 변성 SBR과 커플링제를 이용한 고성능 타이어 트레드 고무의 합성 제조 기술에 대하여 최근 연구 방향과 함께 작용 메카니즘에 대하여 고찰하였다.

• 한국정보전자통신기술학회논문지
• /
• 제12권2호
• /
• pp.142-149
• /
• 2019

전기자동차를 무선으로 충전하기 위하여서는 전기에너지를 전송하기 위한 코일이 꼭 필요하다. 코일의 형태는 기본적인 원형 코일에서부터 두 코일 간의 커플링 효과를 높이기 위한 DD 형상의 코일 등 여러 종류가 있다. 하지만 코일 간 커플링이 좋은 DD 형상의 코일은 송수신 측 전력변환장치의 구조가 복잡해지는 단점이 있어 사용에 제한이 있다. 본 논문에서는 자유공간에서 2개의 코일을 이용하여 무선으로 전력을 전송할 때 제작이 편리한 스파이럴 인덕터의 인덕턴스 값을 계산하고 적절한 크기의 인턱터를 설계하는 방법을 제시하였다. 공진기에서 XLm 값이 부하저항 값과 비슷하여질 때 bifurcation 현상이 나타나므로, 이 현상이 덜 일어나도록 XLm 값을 최소부하저항 값과 같도록 선택하여 공진기에 필요한 인덕턴스 값을 계산하였다. 계산된 인덕턴스 값을 스파이럴 인덕터로 구현하기 위하여 스파이럴 인덕터에서 인덕턴스 값과 인턱터의 크기, 턴 수, 총 코일 길이와의 관계를 알아보았다. 또한, 두 개의 코일의 수평 이격에 따른 결합계수 k 값의 변화를 알아본 후 적절한 인덕터를 선정하였다.

• Smart Structures and Systems
• /
• 제24권4호
• /
• pp.435-446
• /
• 2019

The existing piezoelectric spherical transducers with fixed prescribed dynamic characteristics limit their application in scenarios with multi-frequency or frequency variation requirement. To address this issue, this work proposes an improved design of piezoelectric spherical transducers using the resistance tuning method. Two piezoceramic shells are the functional elements with one for actuation and the other for tuning through the variation of load resistance. The theoretical model of the proposed design is given based on our previous work. The effects of the resistance, the middle surface radius and the thickness of the epoxy adhesive layer on the dynamic characteristics of the transducer are explored by numerical analysis. The numerical results show that the multi-frequency characteristics of the transducer can be obtained by tuning the resistance, and its electromechanical coupling coefficient can be optimized by a matching resistance. The proposed design and derived theoretical solution are validated by comparing with the literature given special examples as well as an experimental study. The present study demonstrates the feasibility of using the proposed design to realize the multi-frequency characteristics, which is helpful to improve the performance of piezoelectric spherical transducers used in underwater acoustic detection, hydrophones, and the spherical smart aggregate (SSA) used in civil structural health monitoring, enhancing their operation at the multiple working frequencies to meet different application requirements.

• Elastomers and Composites
• /
• 제46권1호
• /
• pp.45-53
• /
• 2011

실란커플링제인 bis-(3-triethoxysilpropyl)tetrasulfide (TESPT)가 실리카 충전 오일씰용 NBR 복합소재의 물성에 미치는 영향에 대하여 연구하였다. 복합소재의 가교거동과 가교밀도는 ODR (oscillating disk rheometer)과 톨루엔 팽윤비 시험을 통하여 측정하였으며, 기계적 물성은 가황물을 공기 내열 노화 및 ASTM No.3 oil에 내유 노화시켜 시험 전 후 값을 UTM (universal testing machine)과 Shore A 경도계를 사용하여 측정하였다. 오일씰의 성능과 수명에 큰 영향을 미치는 복합소재의 탄성회복은 가황물에 굽힘 변형을 주어 노화시킨 후 시편이 회복되는 길이를 측정하여 회복 각(angle of recovery)을 계산하였으며, 저온에서의 탄성회복거동은 TR (temperature retraction) 시험을 통하여 측정하였다. 또한, Taber식 마모시험기를 사용하여 가황물의 내마모성을 측정하고 SEM(scanning electron microscope)을 사용하여 마모면의 형상을 관찰하였다. 시험결과 실리카가 충전된 복합물에 TESPT가 첨가되면 복합물의 흐름성이 향상되고 실리카와 NBR 간의 상호작용 및 가황물의 가교밀도가 향상되어 가황물의 경도, 100% 모듈러스, 탄성회복성, 내마모성, 내열노화성 및 ASTM No.3 오일에 대한 내유성이 향상됨을 알 수 있었다.

• Interaction and multiscale mechanics
• /
• 제4권4호
• /
• pp.247-255
• /
• 2011

Understanding the structural stability of carbon nanostructure under heat treatment is critical for tailoring the thermal properties of carbon-based material at small length scales. We investigate the heat resistance of the single carbon nanoball ($C_{60}$) and carbon nanoonions ($C_{20}@C_{80}$, $C_{20}@C_{80}@C_{180}$, $C_{20}@C_{80}@C_{180}C_{320}$) by performing molecular dynamics simulations. An empirical many-body potential function, Tersoff potential, for carbon is employed to calculate the interaction force among carbon atoms. Simulation results shows that carbon nanoonions are less resistive against heat treatment than single carbon nanoballs. Single carbon nanoballs such $C_{60}$ can resist heat treatment up to 5600 K, however, carbon nanoonions break down after 5100 K. This intriguing result offers insights into understanding the thermal-mechanical coupling phenomena of nanodevices and the complex process of fullerenes' formation.

• 대한전자공학회논문지
• /
• 제25권1호
• /
• pp.101-107
• /
• 1988

This paper proposes a circuit extractor which extracts a netlist from the CIF input file cntaining the layout mask artwork informations. The circuit extractor extracts transistors and their interconnections, and calculates circuit parameter such as parasitic resistance and parasitic capacitance from the mask informations. When calculating the parasitic resistance, we consider the current flow path to reduce the errors caused by the resistance approximation. Similarly, we consider the coupling capacitance which has an effect on the circuit characteristics, when the parasitic capacitances are calculated. Therefore, using these parameter values as an input to circuit simulation, the circuit characteristics such as delay time can be estimated accurately. The presented circuit extraction algorithm uses a multiple storage quad tree as a data sturucture for storing and searching the 2-dimensional geometric data of mask artwork. Also, the proposed algorithm is technologically independent to work across a wide range of MOS technologies without any change in the algorihm.

• Transactions on Electrical and Electronic Materials
• /
• 제8권5호
• /
• pp.222-225
• /
• 2007

In this paper, we compared the current limiting characteristics of both the hybrid type and the flux-lock type superconducting fault current limiters(SFCLs), which have a magnetic coupling structure between a primary winding and several secondary windings. The limiting impedances of two SFCLs were derived from each equivalent circuit considering the design parameters of SFCL such as the self-inductance of secondary winding and the resistance of $high-T_C$ superconducting(HTSC) element. Through the comparison for the limiting impedances of two SFCLs considering the dependence of the HTSC element's resistance on the applying voltage into the SFCL, the hybrid type SFCL was confirmed to have larger limiting impedance with smaller resistance of HTSC element than the flux-lock type SFCL. It was expected from the analysis that the hybrid type SFCL was more advantageous than the flux-lock type SFCL from the viewpoint of the fault current limiting level.

• Corrosion Science and Technology
• /
• 제11권1호
• /
• pp.15-19
• /
• 2012

Both electrogalvanized and hot-dip galvanized steel sheets have been finally produced via organic-inorganic surface coating process on the zinc surface to enhance corrosion resistance and afford additional functional properties. Recently, POSCO has been developed a variety of chromate-free coated steels that are widely used in household, construction and automotive applications. New organic-inorganic hybrid coating solutions as chromate alternatives are comprised of surface modified silicate with silane coupling agent and inorganic corrosion inhibitors as an aqueous formulation. In this paper we have prepared new type of hybrid coatings and evaluated quality performances such as corrosion resistance, spot weldability, thermal tolerance, and paint adhesion property etc. The electrogalvanized steels with these coating solutions exhibit good anti-corrosion property compared to those of chromate coated steels. Detailed components composition of coating solutions and experimental results suggest that strong binding between organic-inorganic hybrid coating layer and zinc surface plays a key role in the advanced quality performances.

• 고무기술
• /
• 제5권2호
• /
• pp.94-103
• /
• 2004

The present work describes modification of dual phase filler by electron beam irradiation in presence of multifunctional acrylates like trimethylol propane triacrylate (TMPTA) or silane coupling agent like bis (3-triethoxysilylpropyltetrasulphide) and in-fluence of the modified fillers on the physical properties of styrene-butadiene rubber (SBR) vulcanizates. Modulus at 300 % elongation increases whereas the tensile strength decreases with increase in radiation dose for the dual phase filler loaded styrene-butadiene rubber vulcanizates (SBR). However, modulus and tensile strength significantly increase, which is more, pronounced at higher filler loadings for TMPTA modified dual phase filler loaded SBR. These changes in properties are explained by the equilibrium swelling data and Kraus plot interpreting the polymer-filler interaction. Electron beam modification of the filler results in a reduction of tan ${\delta}$ at $70^{\circ}C$, a parameter for rolling resistance and increase in tan ${\delta}$ at $0^{\circ}C$, a parameter for wet skid resistance of the SBR vulcanizates. Finally, the influence of modified fillers on the properties like abrasion resistance, tear strength and fatigue failure and the improvement in the properties have been explained in terms of polymer-filler interaction.