• Progress in Superconductivity and Cryogenics
• /
• v.7 no.2
• /
• pp.35-38
• /
• 2005

One of the most serious problems in KEPCO system operation is higher fault current than the SCC(Short Circuit Capacity) of circuit breaker. There are many alternatives to reduce the increased fault current such as isolations of bus ties, enhancement of SCC of circuit breaker, applications of HVDC-BTB(Back to Back) and FCL(fault current limiter). But, these alternatives have some drawbacks in viewpoints of system stability and cost. As the superconductivity technology has been developed, the resistance type HTS-FCL(High Temperature Superconductor Fault Current Limiter) can be one of the most attractive alternatives to solve the fault current problem. To evaluate the accurate transient performance of resistance type HTS-FCL, it is needed that the dynamic simulation model considering transient characteristics during quenching and recovery state. Under this background, this paper presents the EMTDC model for resistance type HTS-FCL considering the nonlinear characteristic of final resistance value when quenching and recovery phenomena by fault current injection and clearing occurs.

• Korean Journal of Veterinary Service
• /
• v.30 no.3
• /
• pp.339-351
• /
• 2007

Salmonella infections cause the diseases in poultry and some zoonotic Salmonella can be transmitted to human through poultry products, resulting in food-borne disease. This study was conducted to obtain some useful information for the control of salmonellosis in human. Twenty four Salmonella spp were isolated from poultry carcasses, and they were examined with several methods such as serotyping, antimicrobial resistance test and random amplified polymorphic DNA(RAPD) to identify their characteristics. In serotyping test of 24 strains S enteritidis was 17 (70.8%), followed by S schwarzengrund 3 (12.5%), untyped strain 4 (16.7%). In the results of antimicrobial resistance test, 23 (95.8%) isolates were resistant to at least one antimicrobial agent, generating eight different resistance patterns. In RAPD analysis using URP-6 primer to differentiate Salmonella isolates within a serotype, 4 serogroups were divided into 10 RAPD types: 5 types in S enteritidis, 2 types in S schwarzengrund and 3 types in the remainder.

• Korean Membrane Journal
• /
• v.5 no.1
• /
• pp.31-35
• /
• 2003

The permeation characteristics of the wastewater containing Si fine particles were examined by ultrafiltration using the polyolefin tubular membrane module. Flux with time was due to the growth of Si cake deposited on the membrane surface and the pore plugging by fine particles. The rate of flux decline in the initial stage increased with the trans-membrane pressure. The pore blocking resistance was the dominant resistance at the initial period of filtration and the cake resistance began to dominate with the initial pore blocking resistance. The larger pores compared with the fine particles, the more the membrane pores could be blocked by the fine particles. Before and after treatment, the distribution of particle size was shifted toward to the left. Then, the average size of fine particles in the permeate was 20 nm.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2082-2087
• /
• 2008

The heat transfer process from steam to web through the cylinder drum consists of the thermal resistance by condensate thickness. thickness of shell, and the contact resistance between cylinder and web. The most thermal resistance in conventional cylinder drum dryer is generated by condensate, which is increased by the increase on revolution per minute(RPM). Therefore, the increase of RPM for the production enhancement results in the more thermal resistance, and eventually RPM is restricted. In this study, the theoretical analysis on the characteristics of heat transfer in cylinder drum for paper dryer was performed in the stationary state of steam in drum. The overall heat transfer coefficient, steam quantity and heat transfer quantity were predicted by diameter and length of drum, condensate thickness, revolution per minute and steam temperature for experimental apparatus design.

• Elastomers and Composites
• /
• v.53 no.3
• /
• pp.168-174
• /
• 2018

Natural rubber (NR) and bromo-isobutylene-isoprene rubber (BIIR) were compounded with other formulation chemicals through polymer blending via a mechanical mixing method. After rubber vulcanization by hot-press compression molding, the cure characteristics, mechanical properties, and ozone resistance of the NR/BIIR blends were measured. As the BIIR content increased, the maximum torque of the blends decreased, while the optimum cure time and scorch time tended to increase. Furthermore, the hardness of the blends increased with increasing BIIR content, reaching the maximum value at 75 wt% BIIR, and decreased with a further increase in the BIIR loading. The tensile strength and elongation at break decreased with an increase in the BIIR content, reaching the minimum value at 75 wt% BIIR, and increased with a further increase in the BIIR content. In the ozone resistance test, cracks were not generated when the BIIR content was more than 75 wt%.

• Journal of the Korean institute of surface engineering
• /
• v.27 no.1
• /
• pp.12-18
• /
• 1994

The plasma spray process was used to deposit coatings of $ZrO_2$-8wt%Y2O3 powders on mild steel sub-strate, and the characteristics of as-deposited and heat treated coatings have been investigated. Particulary, the variations of porosity, wear resistance, thermal barrier and thermal shock resistance in $ZrO_2$-8wt% $Y_2O_3$coatings after heat treatment under vacuum circumstance have been investigated. The porosity of the coating layer was increased with increased spray distance. In the case of the arc current of 450A and at the spray distance of 50mm, it was obtained the lowest amount of porosity. After heat treatment, the amount of porosity was found to be decreased, and the wear resistance, microhardness and thermal shock resistance were im-proved. However, the thermal barrier was decreased.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1331-1332
• /
• 2007

In the present works, we investigate the thermal characteristics on Ag/$As_{2}S_{3}$ and Ag/$As_{40}Ge_{10}Se_{15}S_{35}$ amorphous chalcogenide thin film structure for PMC (Programmable Metallization Cell).As the results of resistance change with the temperature on Ag/$As_{40}Ge_{10}Se_{15}S_{35}$ amorphous chalcogenide thin film, the resistance was abruptly dropped from the initial resistance of 1.32 M ${\Omega}$ to the saturated value of 800 ${\Omega}$ at $203^{\circ}C$. On the other hand, the resistance increased to 1.3 $M{\Omega}$ at $219^{\circ}C$.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.10
• /
• pp.794-798
• /
• 2011

This paper was carried out design of 1,700 V Base Resistance Thyristor for fabrication. We decided conventional BRT (base resistance thyristor) device and Trench Gate type one for design. we carried out device and process simulation with T-CAD tools. and then, we have extracted optimal device and process parameters for fabrication. we have analysis electrical characteristics after simulations. As results, we obtained 2,000 V breakdown voltage and 3.0 V Vce,sat. At the same time, we carried out field ring simulation for obtaining high voltage.

• Korean Journal of Veterinary Research
• /
• v.59 no.3
• /
• pp.157-160
• /
• 2019

The production of rmtB-encoded 16S rRNA methylases has emerged as a novel mechanism promoting high-level resistance toward aminoglycosides in Gram-negative bacteria. Between 2015 and 2017, 636 distinct commensal Escherichia (E.) coli isolates were collected from different farms in South Korea to determine the prevalence and molecular characteristics of rmtB. The positive rates of rmtB between all the isolates and amikacin-resistant isolates were 1.1 and 100%, respectively. High-level aminoglycoside resistance could be transferred by conjugation from rmtB-positive donors to higher amikacin-resistance efficacies. This is the first report of 16S rRNA methylase-encoding genes in E. coli isolated from food-producing animals in Korea.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.6
• /
• pp.322-329
• /
• 2020

The utilization of aluminum scrap is a subject of great importance in terms of reducing energy consumption and environmental protection. However, aluminum scrap contains impurities, which can degrade the properties of aluminum alloy, especially corrosion resistance. This study examines the effect of scrap charge rate of aluminum alloys about microstructures and corrosion characteristics. According to the metallographic examinations, Mg2Si tended to become coarser and its uniformity was decreased by increasing aluminum scrap charge rate. The immersion test exhibited corrosion progressed through the eutectic areas due to micro-galvanic interactions. Electrochemical measurements revealed that excess aluminum scrap could reduce the intergranular corrosion resistance of aluminum alloys. Results showed that the scrap charge rate is important factor in the design of corrosion resistance of aluminum die casting alloys.