• 대한환경공학회지
• /
• 제38권8호
• /
• pp.428-434
• /
• 2016

본 연구에서는 하수 내 인 제거 시 티타늄계열 응집제의 인 제거특성을 알아보기 위해 알루미늄계열 응집제와 비교하였다. Jar-tester를 이용하여 다양한 OH/Ti 몰비(B값)의 응집제를 투여하여 실험을 진행하였다. 초기 인 농도가 증가할수록 처리 후 $PO_4-P$ 농도가 0.2 mg P/L 이하에 도달하기 위한 [Ti]/[P]는 감소하였다. T-P 제거효율은 응집제 주입량이 증가할수록 높아졌지만, 최고 제거효율에 도달한 후에는 B값에 관계없이 감소하였다. 반면에 $PO_4-P$ 제거율은 최고점에 도달한 후 B값에 상관없이 일정하게 유지하는 경향이 나타났다. 동일한 인 제거효율에서 Ti계열 응집제의 주입량은 Al계열 응집제보다 약 2배정도 높았다. 또한, Ti계열 응집제의 B값에 따라 인제거효율에 영향을 미쳤다.

• Journal of Korean Neurosurgical Society
• /
• 제53권1호
• /
• pp.1-5
• /
• 2013

Objective : The purpose of this study was to evaluate the characteristics and surgical outcomes of familial hemifacial spasm (HFS) and to discuss the role of genetic susceptibility. Methods : Between 2001 and 2011, 20 familial HFS patients with ten different pedigrees visited our hospital. The data from comprehensive evaluation of these patients, including clinical, radiological and electrophysiological data and surgical outcomes were reviewed to characterize familial HFS and to compare the characteristics between familial HFS and sporadic HFS. Results : According to the family tree, the inheritance pattern was difficult to define clearly using these data. Radiologic findings suggested that the vertebral artery (VA) was a more frequent offender in familial HFS than in sporadic cases (35.0% vs. 10.0%, p<0.001). Chi-square test showed that there were no correlation between VA tortuosity and underlying morbidity such as diabetes or hypertension (p=0.391). Eighteen out of 19 patients who underwent microvascular decompression showed no residual spasm. Other features of familial HFS overlap with sporadic cases. These findings suggest that certain genetic susceptibilities rather than hypertension or diabetes may influence vascular tortuosity and HFS development. Conclusion : In this study, familial HFS seems not so different from sporadic cases. Authors thought familial HFS could have heterogeneous etiology. Further study of familial HFS including clinical, anatomic, genetic, and molecular information may help identify a gene or trait that can provide insight into the mechanisms of sporadic and familial HFS.

• 한국강구조학회 논문집
• /
• 제13권5호
• /
• pp.535-545
• /
• 2001

철골조의 비탄성 거동을 해석하는데 있어 많은 고차해석법이 소개되고 있다. 이 해석법들은 부재의 불완전성과 잔류응력과 같은 재료적인 비선형성 그리고 기하학적 비선형성에 의한 2차 효과를 직접 해석과정에 반영하여 골조의 거동을 좀더 정확히 예측할 수 있다. 이 가운데 비교적 간편하면서도 정확성이 높은 수정소성힌지 해석법을 도입하고 반강접합부의 모델링을 위해 이미 개발하여 제안한 로그 모델을 적용 해석프로그램(RPH-2DF)을 작성하였다. 이 프로그램의 검증을 위해 두께 중복형 접합부를 갖는 골조실험 결과와 해석 결과를 비교하였다. 또한 강접 골조의 거동과 반강 접합부를 갖는 골조의 거동 차이를 규명하기 위해 MIDAS-GEN v4.2.2로 설계된 10층 가새 골조를 대상으로 RPH-2DF를 이용한 해석결과와 비교하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권3호
• /
• pp.315-325
• /
• 2017

The design dimension may not be satisfactory at the final stage due to the welding during the assembly stage, leading to cutting or adding the components in large structure constructions. The productivity is depend on accuracy of the welding quality especially at assembly stage. Therefore, it is of utmost importance to decide the component dimension during each assembly stage considering the above situations during the designing stage by exactly predicting welding deformation before the welding is done. Further, if the system that predicts whether welding deformation is equipped, it is possible to take measures to reduce deformation through FE analysis, helping in saving time for correcting work by arresting the parts which are prone to having welding deformation. For the FE analysis to predict the deformation of a large steel structure, calculation time, modeling, constraints in each assembly stage and critical welding length have to be considered. In case of fillet welding deformation, around 300 mm is sufficient as a critical welding length of the specimen as proposed by the existing researches. However, the critical length in case of butt welding is around 1000 mm, which is far longer than that suggested in the existing researches. For the external constraint, which occurs as the geometry of structure is changed according to the assembly stage, constraint factor is drawn from the elastic FE analysis and test results, and the magnitude of equivalent force according to constraint is decided. The comparison study for the elastic FE analysis result and measurement for the large steel structure based on the above results reveals that the analysis results are in the range of 80-118% against measurement values, both matching each other well. Further, the deformation of fillet welding in the main plate among the total block occupies 66-89%, making welding deformation in the main plate far larger than the welding deformation in the longitudinal and transverse girders.

• 한국자기학회지
• /
• 제3권3호
• /
• pp.229-233
• /
• 1993

광자기 디스크의 제조시 기록막내부의 산소함량에 따른 기록 및 자기적 특성의 변화를 연구하였다. 기록막내의 산소함량 변화는 반응성 스퍼터링에 의해 조절하였으며 스퍼터링 전과정 동안 산소의 거동을 in-situ 잔류가스분석기로 조사하였다. 산소함량의 증가에 따라 보자력은 감 소하였으나 수직이방성 및 수직 각형비등은 변화하지 않았다. 대부분의 첨가된 산소는 스퍼터링 과정중 소모되어 Tb원자와 안정한 산화물을 형성하여 자기적 조성의 변화를 초래하였지만 임계기 록크기와 임계외부자계크기에만 약간의 변화를 가져왔을 뿐 디스크의 기록신호잡음비에는 별로 영향을 미치지 않았다. 또한 디스크의 신뢰도면에서도 크게 감소하지 않았다.

• 치위생과학회지
• /
• 제20권3호
• /
• pp.171-177
• /
• 2020

Background: Maintaining a skilled workforce by minimizing the turnover of competent dental hygienists is very important for securing dental competitiveness. Therefore, it is necessary to find a predictor of turnover and lower turnover intention. To understand dental hygienist turnover, it is necessary to study the resilience, a positive factor of personal characteristics and job embeddedness that induces residual tissue. The purpose of this study was to investigate the effect of dental hygienists' job embeddedness and resilience on turnover intention. Methods: A survey was conducted on licensed dental hygienists nationwide, from March 19 to July 19, 2020. T-test and one way ANOVA analysis were performed to compare the job embeddedness, resilience, and turnover intention according to the general characteristics. Pearson's correlation analysis was performed to identify the correlation between job embeddedness, resilience, and turnover intention. Multiple regression analysis was performed to determine the effect on the turnover intention. Results: Job embeddedness was the highest with link and resilience scoring 3.57 and 4.16, respectively. The turnover intention scored 3.53. Among the general characteristics, age, marriage, total dental clinic career, education degree, and position showed statistically significant differences in job embeddedness, resilience, and turnover intention. Suitability, link, and sacrifice of job embeddedness were shown to affect the degree of turnover intention, with an explanatory power of 26.2%. Conclusion: In order to reduce the dental hygienists' turnover intention, job embeddedness and resilience should be increased. Thus, measures should be undertaken for professional and systematic program development and human resources management.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.730-739
• /
• 2010

Stress history increases in penetration resistance due to the increase in residual horizontal stress of granular soil. This study analyzes the effect of stress history on the results of CPT and DMT from calibration chamber specimen in OC as well as NC state. Test results show that the normalized cone resistance by mean effective stress correlates well with the relative density and the state parameter, whereas the normalized cone resistance with regard to vertical effective stress is a little affected by stress history. The horizontal stress index($K_D$) in DMT more reflects the influence of stress history on granular soil than the dilatometer modulus($E_D$) and cone resistance($q_c$). The $K_D/K_0$, in which the effect of stress history on $K_D$ is compensated by the at-rest coefficient of earth pressure, $K_0$, is related to relative density, state parameter and the normalized cone resistance by mean effective stress. It is also observed that the normalized dilatometer modulus by mean effective stress($E_D/{\sigma_m}'$) is unique correlated with the state parameter, regardless of stress history.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.234-240
• /
• 2013

PURPOSE. This study evaluated the effectiveness of various methods for removing provisional cement from implant abutments, and what effect these methods have on the retention of prosthesis during the definitive cementation. MATERIALS AND METHODS. Forty implant fixture analogues and abutments were embedded in resin blocks. Forty cast crowns were fabricated and divided into 4 groups each containing 10 implants. Group A was cemented directly with the definitive cement (Cem-Implant). The remainder were cemented with provisional cement (Temp-Bond NE), and classified according to the method for cleaning the abutments. Group B used a plastic curette and wet gauze, Group C used a rubber cup and pumice, and Group D used an airborne particle abrasion technique. The abutments were observed using a stereomicroscope after removing the provisional cement. The tensile bond strength was measured after the definitive cementation. Statistical analysis was performed using one-way analysis of variance test (${\alpha}$=.05). RESULTS. Group B clearly showed provisional cement remaining, whereas the other groups showed almost no cement. Groups A and B showed a relatively smooth surface. More roughness was observed in Group C, and apparent roughness was noted in Group D. The tensile bond strength tests revealed Group D to have significantly the highest tensile bond strength followed in order by Groups C, A and B. CONCLUSION. A plastic curette and wet gauze alone cannot effectively remove the residual provisional cement on the abutment. The definitive retention increased when the abutments were treated with rubber cup/pumice or airborne particle abraded to remove the provisional cement.

• 콘크리트학회논문집
• /
• 제21권6호
• /
• pp.773-780
• /
• 2009

강-콘크리트 계면거동의 성질을 정의하는 계면변수를 파악하고, 구성모델의 성격을 정의하는 구성변수의 물리적 특성 파악과 값의 크기를 결정하기 위해 강-콘크리트 계면에 대한 거동실험을 수행하였다. 구성변수는 포괄적인 적용을 목적으로 부착계면 뿐만 아니라 비부착계면의 거동까지 포함하기 위해 최근에 Mohr-Coulomb 파괴규준에 근거하여 제안된 구성모델을 기준하여 결정하였으며, 구속압을 받는 계면의 취성으로부터 연성까지의 파괴거동 성질을 고려하기 위해 낮은 구속압 및 중간크기의 구속압을 포함하는 네 종류의 구속압을 고려하였다. 실험 결과에 대한 분석을 통해 최대평균전단응력과 잔류응력 및 모드 II 파괴에너지 방출률과 구속압 간의 관계는 각 경우가 선형적 관계에 있음을 확인하였다. 이 논문에서 얻어진 실험 결과에 근거하여 이어지는 후속 논문에서는 해석적 방법에 의한 계면상수 값의 결정과 결정된 계면상수 값을 이용한 계면유한요소해석을 수행하여 계면상수 값의 적절성을 검증하였다.

• 한국해양공학회지
• /
• 제3권2호
• /
• pp.125-137
• /
• 1989

To check technical improvement in the soundness and strength of 12% Cr steel rotor, a 25 tons of rotor with 65 tons of ingot was made in real size and was cut to pieces to take test samples, and the various mechanical tests such as impact, tensile, creep, and fatigue were carried out. The strengths are compared with those of 1% Cr-Mo-V rotor of same size. Microstructures of the samples are examined and reviewed. The results can be summarized as follows. 1) Fracture appearance transition temperatures are 80.deg. C at the center part and 60.deg. C near surface of 12% Cr rotor, and 8.deg. C near surface of 1% Cr-Mo-V rotor. 2) Comparative rapid softening occurs at higher temperatures above 600.deg. C for 12% Cr steel and 550.deg. C for 1% Cr-Mo-V steel in tension tests. 3) Fatigue crack propagation rate of 12% Cr steel is almost same as that of 1% Cr-Mo-V steel at the same corresponding surface part of the rotors. The crack growth rate of center part of 12% Cr rotor is faster than near surface part of the rotor, and the crack growth rate at the load condition of R=0.04 is slower than that of the load condition of R=0.5 for both 12% Cr steel and 1% Cr-Mo-V steel. 4) Crack growth rate of radial direction near surface of 12% Cr rotor is faster than that of transverse direction at the same part because of the difference in residual stresses. 5) Both creep and fatigue strengths of 12% Cr steel are superior to those of 1% Cr-Mo-V steel and the difference is thought the effect of climb and glide controlled creep by solid solution of alloying elements and dispersion of carbides.