• Journal of Ocean Engineering and Technology
• /
• v.19 no.6 s.67
• /
• pp.64-71
• /
• 2005

The welding methods have been applied to the most structural products used in the automobile, ship construction, and construction. The structure steel must have sufficient strength of structure; However, the mechanical properties of the welded part changes when it is welded. Therefore, the stability or life of the structure may be affected by the changed mechanical properties. The mechanical properties of the welded part must be examined in order to ensure the safety of structure. In this research, the SS400 steel and the STS304 steel were used to estimate the mechanical properties of the HAZ by weld thermal cycle simulation. In this study, the materials were used to examine the weld thermal cycle simulation characteristic, under two conditions: the drawing with diameter of $\Phi$10 and the residual stress removal treatment. To examine the mechanical properties by the weld thermal cycle simulation, the tensile test was carried out in room temperature. The crosshead speed was lmm/min.

• Journal of Home Health Care Nursing
• /
• v.19 no.2
• /
• pp.150-161
• /
• 2012

Purpose: This study was performed to investigate the influencing factors of cognitive function and depression in elderly. Method: From 3 provinces, 282 elders who resided in community and facilities completed structured questionnaires, including cognitive functions, depression, self-esteem, ADL, and IADL. Data were analyzed by applying ${\chi}^2$-test, ANOVA, partial correlation coefficient, and stepwise multiple regression analysis with SAS 8.12. Results: Community dwelling aged people showed higher scores in MMSE-K, self-esteem, ADL and IADL, and showed lower scores in depression than facility elders. MMSE-K was positively correlated in self-esteem, ADL, and personal cognition of health, except depression. Major factors that affect cognitive function of elderly were residual type, age, and IADL. In addition, major factors that affect depression of elderly were self-esteem, personal cognition of health, and marital status. Conclusions: Based on the results above, it is necessary to identify the status of cognition and depression in the elderly, and to develop nursing intervention programs, which improve cognitive function and reduce depression for aged, especially for the facility admitted aged.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.4_1
• /
• pp.23-32
• /
• 1992

The objective of this study is to identify the quantitative relationships among the important physical factors associated with failure of steel members under strong seismic excitations through very low-cycle fatigue tests. Very low-cycle fatigue is meant to be structural fatigue causing cracks and rupture in about 5~30 cycle ranges. The angle specimen was subjected to repeated axial Ioad after undergoing inelastic buckling. The test results reveal that the energy absorption capacities vary heavily with the history of loading and the failure mode. The maximum values of residual local strain at the initiation of a visible crack due to the very low-cycle fatigue were of the order of 25~40%, regardless of loading patterns, deflection modes, and width-to-thickness ratios.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.8 s.227
• /
• pp.1099-1108
• /
• 2004

In this paper, a study on the development of expert system for Al matrix composite with shape memory alloy fiber is performed to evaluate termomechanical behavior and mechanical properties. Expert system is very useful computer-based analysis system designed to make analysis technique and knowledge conveniently available to a lot of fabricable condition. In the developed system, it is possible to predict termomechanical behavior and mechanical properties for other composite with shape memory alloy fiber. The smartness of the shape memory alloy is given due to the shape memory effect of the TiNi fiber which generates compressive residual stress in the matrix material when heated after being prestrained. For finite element analysis, an analytical model is assumed two dimensional axisymmetric model compared of one fiber and the matrix. To evaluate the strength of composite using FEM, the concept of smart composite was simulated on computer Thus, in this paper, the FEA was carried out at two critical temperature conditions; room temperature and high temperature(363k). The finite element analysis result was compared with the test result for the analysis validity.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.11a
• /
• pp.65-70
• /
• 2001

In this study, CT specimens were prepared from spring steel(SUP9) processed shot peening which was room temperature, low temperature and high temperature experiment. And we got the following characteristics from fatigue crack growth test carried out in the environment of room, low temperature and high temperature at $25^{\circ}C$, -3$0^{\circ}C$, -5$0^{\circ}C$, -7$0^{\circ}C$, -10$0^{\circ}C$ and 5$0^{\circ}C$, 10$0^{\circ}C$ , 15$0^{\circ}C$, 18$0^{\circ}C$ and in the range of stress ratio of 0.05 by means of opening mode displacement. The threshold stress intensity factor range $\DeltaK_{th}$ in the early stage of fatigue crack growth (Region I ) and stress intensity factor range ΔK in the stable of fatigue crack growth (Region II) was decreased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature and high temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.9 s.180
• /
• pp.2319-2325
• /
• 2000

This thesis studied that seven kinds of residual elements(inclusions) had influenced on fracture toughness($K_{IC}$) obtained by Begley-Logsdon and Rolfe-Novak model equation using tensile an d impact test data of I%CrMoV HP(high pressure) rotor steel. $K_{IC}$ design curve of ASME and fracture surface by SEM were also considered, obtained results are summarized as follows $K_{IC}$ was linearly increased with increase of temperature, effect of the inclusions was significantly over FATT. $K_{IC}$ at lower shelf temperature was quantitatively related to yield strength and was agreed well with Begley's equation. It was difficult to determine $K_{IC}$ because of specimen size and tester capacity at upper shelf temperature, but for this view point Rolfe-Novak's equation was useful. The degree of brittle fracture was dependent on FATT fundamentally, adding S, Sb to matrix decreased impact energy and adding Cu, As increased yield(tensile) strength, and the influence of the others minority inclusion was comparatively insignificant.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.2
• /
• pp.78-85
• /
• 2002

We introduce a rotational decision-directed joint algorithm of blind equalization coupled with carrier recovery for 32-QAM demodulation with high symbol rate. The proposed carrier recovery, which we call a rotational decision-directed carrier recovery(RDDCR), removes the residual phase difference by rotating the decision boundary for the kth received symbol by the frequency detector output of the (k-1)th received symbol. Since the RDDCR includes the function of PLL loop filter by rotating the decision boundary, it gives a simpler demodulator structure. The rotational decision-directed blind equalization(RDDBE) with the rotated decision boundary based on the Stop-and-Go Algorithm(SGA) operated during tracking the frequency offset by the RDDCR and removes intersymbol interference due to multipaths and channel noise. Test results show that symbol error rate of $10^{-3}$ is obtained before the forward error correction when SNR equals 15dB with 150KHz of carrier frequency offset and two multipaths, which is the channel condition for 32-QAM receiver.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.7
• /
• pp.169-178
• /
• 2020

This study examines the current situation of responsibility accounting and proposed management solutions according to responsibility centers on public universities in Vietnam. The study applies quantitative research methods, and collected data through structured questionnaires to 138 public universities in Vietnam in 2019, receiving back 55 valid questionnaires. The data was cleaned and analyzed with SPSS software. The results show that most public universities in Vietnam assigned management responsibility to their departments, but responsibility accounting was not comprehensive since many universities are not financially autonomous. The Kruskal Wallis Test was conducted to compare the current situation of responsibility accounting among universities by the degree of autonomy and by geographic area. The research found out that totally autonomous universities assigned management responsibility to responsibility centers better than semi-autonomous and non-autonomous universities did. Regarding the evaluation of management responsibility, universities in Central Vietnam rated specific quantitative criteria, residual income (RI) and returns on investment (ROI) higher than universities in the North and the South of Vietnam did. However, universities in the South of Vietnam rated the evaluation of profits by department higher than the rest. The study also suggests structure for establishing responsibility centers in accordance with public universities in Vietnam.

• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.51-58
• /
• 2014

Injection molding simulation provided optimized design results by analyzing quality problems while the product is in assembly or in the process of manufacturing with make automobile plastics. Frequent change of design, change of injection molding, repetition of test injection which was held in the old way can now be stopped. And quality upgrade is expected instead. This report deals with the effect which the position of injection molding automobile console gate and number has on product quality including pressure at end of fill, bulk temperature at end of fill, shear stress of end of fill, residual stress at post filling end, product weld lines and warpage results. Simpoe-Mold simulates the complete manufacturing process of plastic injected parts, from filling to warpage. Simpoe-Mold users, whether they are product designers, mold makers or part manufacturers, can identify early into the design stage potential manufacturing problems, study alternative solutions and directly assess the impact of such part modification, whatever the complexity and geometry of such parts, shell part as plain solid parts.

• Korean Journal of Pharmacognosy
• /
• v.51 no.3
• /
• pp.207-216
• /
• 2020

The analysis method for qualitative analysis of the screening method that can be performed prior to the quantitative analysis of individual pesticide was reviewed in order to meet the safety standards that are being strengthened in the field of pesticide residue testing of herbal medicines. Among the residual pesticides presented in the Korean Pharmacopoeia, 56 pesticides, excluding 15 pesticides that need to be individually analyzed, were selected for analysis using QuEChERS preprocessing and GC-MS/MS, which are used in the existing agricultural products field. For each pesticide, the detection limit level of 0.001-0.005 mg/kg and the quantitative limit level of 0.002-0.017 mg/kg were confirmed. In the recovery test in which the standard was treated at a concentration of 0.02 mg/kg, it was confirmed that the proportion of pesticides satisfying the recovery of 70-120% was 85.7-96.4% for each herbal medicine, so it was confirmed that it was a level that could be reviewed by the screening method.