• 한국응용곤충학회지
• /
• 제52권4호
• /
• pp.415-425
• /
• 2013

볼록총채벌레는 제주도 감귤에서 경미한 피해만 보고되다가 2007년부터 다발생하여 그 피해가 갈수록 심각해지고 있다. 본 연구는 적산온도를 이용하여 볼록총채벌레 각 발생세대의 발생최성기를 예측할 수 있는 모형을 개발하고자 수행하였다. 볼록총채벌레 성충 발생세대수를 독립변수(x)로 취급하고 세대별 발생최성기의 적산온도를 종속변수(y)로 취급하여 직선 회귀식을 추정하였다. 감귤원에서 유살된 자료와 녹차 또는 키위과원에서 얻은 자료를 기반으로 각각 감귤기반모형(y = 310.9x + 69.0, $r^2$=0.99) 녹차기반모형(y = 285.7x + 84.1, $r^2$=0.99)을 개발하였다. 각 모형의 예측값과 독립된 포장 실측자료와의 잔차자승합을 토대로 모형의 적합성을 평가하였으며, 녹차기반모형의 적합력이 좋았다. 본 예측모형을 통한 계산값과 실측치의 불일치에 대한 원인과 모형의 포장 활용도에 대하여 고찰하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.610-612
• /
• 2008

Piston cores retrieved from the eastern part of the deep-water Ulleung Basin were analyzed to access the potential of hydrocarbon gas generation and natural gas hydrate (NGH) formation. Seismic data acquired in the study area were also analyzed to determine the presence of hydrocarbon gas and/or NGH, and to map their distribution. Core analyses revealed high total organic carbon (TOC) contents which favor hydrocarbon generation. The cores recovered from the southern study area showed the sufficient residual hydrocarbon gas concentrations for the formation of significant NGH. These cores also showed the cracks developed parallel to the bedding that suggest significant gas content in situ. A number of seismic blanking zones were observed on seismic data. They are identified as vertical to sub-vertical chimneys caused by the upward migration of pore fluid or gas, and containing of free gas and/or NGH. Often, they are associated with velocity pull-up structures that are interpreted to be the result of high-velocity NGH. The seismic data also showed several bottom-simulating reflectors (BSRs) that are associated with overlying NGH and underlying free gas. The distribution of blanking zones and BSRs would be impacted by the lateral differences of upward methane fluxes.

• 에너지공학
• /
• 제13권1호
• /
• pp.1-11
• /
• 2004

가스화기술은 전세계적으로 수소에너지 사회로 진입하는 과정에서 필요한 대량수소 공급체계를 구축하는데 중단기적으로 필요한 기술이다. 장기적으로는 풍력이나 태양광과 같은 순수한 재생가능에너지에 기반한 수소공급 체계로 발전될 것이나, 향후 10-20년간 대량수순 제조가 필요하다면 경제성이 있는 기술을 $CO_2$ 발생이 최소화되면서 효율도 높은 기술로 발전시켜 적용하는 방향으로 진행될 것이다. 특히, 국내에서는 천연가스, 석탄, 중질잔사유, 폐기물, 바이오매스 등의 원료로부터 출발한 수소제조가 경제적인 측면에서 유리하므로 최소한 중단기적으로는 활용될 것으로 보인다 수소에너지 이슈가 부각되는 배경중의 하나가 기후변화협약에 대응한 $CO_2$저감의 필요성이므로, 이들 중단기적으로 활용될 원료들의 수소제조기술들은 반드시 $CO_2$저감이 가능한 기술로서 개발되어야 한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제7권1호
• /
• pp.43-52
• /
• 2018

In recent years, the need of high accuracy navigation for vehicles has increased due to the development of autonomous driving vehicles and increase in land transportation convenience. This study is performed for vehicle users to achieve a performance of centimeter-level positioning accuracy by utilizing Compact Network Real-time Kinematic (RTK) that is applicable as a national-level infrastructure. To this end, medium-baseline RTK was implemented in real time to estimate accurate integer ambiguities between reference stations for reliable generation of Network RTK correction using the linear combination of carrier-phase observations and L1/L2 pseudo-range measurements. The residual tropospheric error was estimated in real time to improve the accuracy of double-differenced integer ambiguity resolution between network configuration reference stations that have at least 30 km or longer baseline distance. In addition, C++ based software was developed to enable real-time generation and broadcasting of Compact Network RTK correction information by utilizing an accurately estimated double-differenced integer ambiguity values. As a result, the horizontal and vertical 95% accuracy was 2.5cm and 5.2cm, respectively, without performance degradation due to user's position change within the network.

• 한국철도학회논문집
• /
• 제14권5호
• /
• pp.398-403
• /
• 2011

균열이 용접부 내와 같은 잔류응력의 영향을 받는 곳에 존재할 경우, 균열은 닫힘균열로 존재할 수 있으며, 인장과 압축에 대하여 비대칭적인 거동을 보이게 된다. 이러한 비선형 균열에 대하여 균열면에서 발생하는 고조파를 이용한 초음파 탐지 기법이 활발히 연구되고 있다. 본 연구에서는 비선형 접촉면에서 발생하는 고조파에 대한 파라미터 연구를 수행하였다. 본 연구는 일반적인 3차원 균열로 나아가기 위한 기초연구의 성격을 띄고 있다. 압축과 인장에 대해 각기 다른 선형 거동을 나타내는 접촉면을 가정하였고 1차원 문제를 고려하였다. 기본주파수 성분에 대한 2차고조파 성분의 비를 다양한 강성비, 입사파의 주파수, 접촉면의 두께에 대하여 조사 하였다.

• 한국세라믹학회지
• /
• 제43권9호
• /
• pp.582-587
• /
• 2006

Decomposition behavior of $ferro-Si_3N_4$was investigated with varying temperature and holding time in mud components for high temperature refractory applications. Porosities gradually increased with increasing temperature and holding time due to the carbothermal reduction of $Si_3N_4\;and\;SiO_2$. Silicon monoxide (SiO) as a intermediate resulted from evaporation of $Si_3N_4\;and\;SiO_2$ reacted with C sources to generate needle-like ${\beta}-SiC$ and Fe in $Si_3N_4$ acted as a catalyst in order to enhance growth of SiC grain with the preferred orientation. SiC generation yield increased with increasing holding time, all of the $Si_3N_4\;and\;SiO_2$ affected on SiC formation up to 2h. However, SiC generation was only dependent on residual $SiO_2$ over 2h, because the carbothermal reduction reaction of $Si_3N_4$ was no longer possible at that time.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.228-235
• /
• 2011

Sintering behavior and lightweight characteristics of porcelain by addition of FAHM (Fly-Ash Hollow Microsphere) were evaluated. Green body of Backja composition (general porcelain) in which FAHM was added(15 and 20 wt%) was made by slip casting method. The green body was sintered at 1270 and $1290^{\circ}C$ and maintained for 1h. The bulk density and linear shrinkage of the sintered body with FAHM (20 wt%) decreased. As the contents of FAHM. increased, mullite and cristobalite phases increased. In the microstructure, FAHM shells remained after sintering, and the generation of mullite fibers around FAHM shells also were confirmed. the weight of porcelain with of 20% FAHM decreased by 40% and residual FAHM shells promoted the mullite of generation in the matrix.

• 조명전기설비학회논문지
• /
• 제30권2호
• /
• pp.31-36
• /
• 2016

For the purpose of indoor air purification, air conditioner or purifier is generally used, but the long operating time induced the contamination by cumulation of bacteria in the air filter. The ozone sterilization method can be one of the effective sterilization method for this case. Ozone has not leave a secondary residual contaminants, as well as a strong sterilization power. In this study, nonthermal plasma technology is investigated as an ozone generator for the air filter sterilization. Additionally, nonthermal plasma technology is possible to obtain the generation of negative ions and electrostatic force by simply adjusting the applied voltage.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.152-155
• /
• 2004

Recently constructions of large scale infrastructures have been tending upwards, due to continuous growth of economy and increase of demands. In addition, hydration heat occurs rapidly in early age just after casting of concrete owing to higher strength and massive structure of concrete. Consequently, cracks and residual stress are developed in accordance to field condition. Moreover, These have harmful influences on safety, durability, watertight, waterproof, and shape of concrete structure. In this study, hydration heat tests were conducted on three of self-compacting concrete and one of high strength concrete. Heat generation and temperature are compared and evaluated based on the test results.

• 비파괴검사학회지
• /
• 제30권6호
• /
• pp.564-568
• /
• 2010

When ultrasound propagates to a crack, transmitted and reflected waves are generated. These waves have useful information for the detection of the crack lying in a structure. When a crack is under residual stress, crack surfaces will contact each other and a closed crack is formed. For closed cracks, the fundamental component of the reflected and transmitted waves will be weak, and as such it is not easy to detect them. In this case, higher harmonic components will be useful. In this paper, nonlinear characteristic of a closed crack is modeled by a continuum material having a tensile-compressive unsymmetry, and the amplitude of the second harmonic wave was obtained by spectrum analysis. Variation of the second harmonic component depending on the nonlinearity of the inclusion was investigated. Two-dimensional plane strain model is considered, and finite element software ABAQUS/Explicit is used.