• Journal of Environmental Health Sciences
• /
• v.27 no.1
• /
• pp.88-92
• /
• 2001

The simultaneous analytical method for 37 residual pesticides was developed by a gas chromatography with $^{63}$ Ni electron capture detector. Pesticides added in soybean sample were extracted with 70% acetone in water and methylene chloride in oder, and then cleaned up via open-column apparatus packed with florisil and alumina N. The Ultra-2 fused capillary column was used to separate the products. The resolution between the last isomeric peak of cypermethrin (56.398 min) and the first isomeric peak of flucythrinate (56.421 min) was not satisfactory and the last isomeric peak of fenvalerate(58.783 min) and the first isomeric peak of fluvalinate(58.835 min) was overlapped. Except for $\alpha$-BHC, dichlofluanid, captan, and captafol, most recoveries were showed over 70%.

• Analytical Science and Technology
• /
• v.6 no.3
• /
• pp.283-288
• /
• 1993

The solvent extraction and clean up processes for the gas chromatographic determination of muarimol pesticide residues in apples were investigated and examined the changes of residual concentration with the passage of time. The extracted pesticide with methanol were partitioned with dichloromethane after adding sodium chloride solution. The separated solutions were concentrated and transfered to the alumina column for clean up, and eluated with 1-chlorobutane : methanol solution. As a results their recovering for 0.200 and 1.00ppm muarimol spiked on apples have shown 79~95%. Residual amounts of nuarimol in apple was 0.0830ppm when the fungicide was treated eight times until 3 days before its harvest. It seems to be safely used when nuarimol is treated six times until 7 days before harvest of apple.

• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.65-71
• /
• 2003

The injection concentration of corrosion inhibitor increases under the pH 7, temperature of 2$0^{\circ}C$, and alkalinity of 35 mg/l (as CaCO$_3$), the corrosion rate gradually decreased. When the corrosion inhibitor of 10 mg/l is injected, the corrosion rate for carbon steel pipe, galvanized steel pipe, and copper pipe reduces for 37, 66 and 61 % respectively that it is more efficient on galvanized steel pipe and copper pipe. As a result of examination of corrosion rate at pH 6, 7, and 8 when injecting 10 mg/l of corrosion inhibitor under the conditions of 2$0^{\circ}C$ in water temperature and 35 mg/l (as CaCO$_3$) in alkalinity, the efficiency of the corrosion inhibitor increases as the pH increases. For carbon steel pipe, it does not show much a difference with the change of the pH condition, but galvanized steel pipe and copper pipe clearly show the corrosion rate depending on the change of the pH condition. The efficiency of corrosion inhibitor is low as the concentration of residual chlorine is high, but it does not show a great influence at 0.4 mg/l or less. For each pipe type, in the case of carbon steel pipe, the range of increase of corrosion speed following the residual chloride is higher than the other pipe types. In the meantime, the effect following the residual chlorine in copper pipe is low.

• Journal of the Korean institute of surface engineering
• /
• v.52 no.2
• /
• pp.78-83
• /
• 2019

Chloride baths for electrodeposited Ni thin films were fabricated by dissolving metal Ni powders with the mixed solution consisting of HCl and de-ionized water. Current efficiency, residual stress, surface morphology and microstructure of Ni films with the change of metal ion ($Ni^{2+}$) concentrations in the plating solution were studied. Current efficiency was measured to be more than 90% with increasing $Ni^{2+}$ concentrations in the plating solution. Residual stress of Ni thin film was increased from about 400 to 780 MPa with increasing $Ni^{2+}$ concentration from 0.2 to 0.5 M. It is gradually decreased to 650 MPa at 0.9 M $Ni^{2+}$ concentration. Smooth surface morphologies were observed over 0.3 M $Ni^{2+}$ concentration, but nodule surface morphology at 0.2 M. Ni films consist of FCC(111), FCC(200), FCC(220) and FCC(311) peaks in XRD patterns. Preferred orientation of FCC(111) was observed and its intensity was slightly decreased with increasing $Ni^{2+}$ concentration. The average grain size was slightly increased at 0.3 M $Ni^{2+}$ concentration and then slightly decreased with increasing $Ni^{2+}$ concentration.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.3
• /
• pp.96-103
• /
• 2001

This study was carried out to investigate the major factors for the removal of NOMs (Natural Organic Matters) by alum ferric chloride and blended coagulants that consisted of alum and ferric chloride. Investigated factors were pH, the dosage of coagulant, alkalinity, hardness and bloc strength. The particle size contained in the test water came from the Han River was also measured. DOC(Dissolved Organic Carbon) removal at pH 6 was two to three times higher than at pH 8.5. The blended coagulant showed 9 to 10 percent higher DOC removal efficiency and 2 to 4 percent higher turbidity under the same condition. Alkalinity consumption of alum, ferric chloride and blended coagulant was 81%, 90% and 86% of theoretical value, respectively. The limit concentration of alkalinity to avoid pin floe was 10 mg $CaCO_3/L$ when alum was used. Hardness had no apparent effect on coagulation. The residual turbidity and $UV_{254}$ showed a tendency of increasing with floc strength($sec^{-1}$) increase. The order of floe strength was the following; alum >blended coagulant > ferric chloride. The particle counter test showed 89 percent of the small particle size(SPS, $1~5{\;}{\mu}textrm{m}$) and 11 percent of the medium to large particle size(M.LPS, $5~125{\;}{\mu}textrm{m}$). At PH7.85, the particle removal efficiencies of SPS($1~5{\;}{\mu}textrm{m}$) and M.LPS($5~125{\;}{\mu}textrm{m}$) in the coagulation process were 81% and 95%, respectively.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.597-606
• /
• 1992

Effects of dilution rate, inlet glucose and ammonium chloride concentrations on ,he performance of continuous culture of Alcaligenes eutrQPhus for poly-p-hydroxybutyrate (PHB) production were investigated. When inlet substrate concentrations were maintained constant (inlet glucose concentration = 20 g/l, inlet ammonium chloride concentration = 2 g/l), growth rate of residual biomass and PHB production rate showed its maximum at $0.1h^{-1}$ and $0.06h^{-1}$, respectively, and washout at $0.13h^{-1}$. PHB content decreased from 50% to 25% by increasing dilution rate, while specific PHB production rate increased continuously. Cell mass and PHB concentration gave its maximum values at inlet ammonium chloride concentration of 2 g/l and thereafter decreased, which showed the existence of substrate inhibition by ammonium. When inlet glucose concentration was 30 g/l, cell mass reached its maximum value, while PHB concentration increased continuously. The parameters of kinetic model were evaluated by the graphical and parameter estimation methods. The computer simulation results for the effects of dilution rate, inlet glucose and ammonium chloride concentrations fitted the experimental data very well.

• Journal of Life Science
• /
• v.21 no.3
• /
• pp.406-411
• /
• 2011

To investigate the effects of short-term treatment with tri-n-butyltin chloride (TBTCl) and bisphenol A (BPA) on the reproduction of striped field mice, the mice were intramuscularly injected with TBTCl or BPA immediately before the reproductive season and examined in the reproductive season after keeping them for 4 months. As a result, there were no differences between the control and the compound-treated groups regarding body weight in both sexes, the residual levels of the compounds in the adult males, and the gonadosomatic index (GSI) and the histological structures with LM and EM of the testes and epididymides in both the adult and young males. The infant mortality and abortion rate, however, were high in the TBTCl-treated groups and BPA-treated groups respectively, compared to the control group. Conclusively, it was suggested that short-term treatment with TBTCl or BPA in mice in the non-reproductive season might have inhibited the development of the uterine embryos or fetuses, although it did not induce accumulations of these compounds or affect the reproductive organs of adult and young (F1) males.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.2
• /
• pp.84-92
• /
• 2023

As temporary storage facilities for spent nuclear fuels in domestic nuclear power plants are expected to be saturated, external intermediate storage facilities would be required in the future. Spent nuclear fuels are stored in metal canisters and then placed in a dry environment within concrete or metal casing for operation. In the United States, the dry storage method for spent nuclear fuels has been operated for an extended period. Based on the corrosion experiences of dry storage canisters in chloride environments, numerous studies have been conducted to reduce corrosion in welds. With the construction of intermediate storage facilities in Korea for spent nuclear fuels expected near coastal areas adjacent to nuclear power plants, there is a need for research on the corrosion occurrence of welds and mitigation methods for canisters in chloride environments. In this paper, we measured and compared the residual stresses in the Heat-Affected Zones (HAZ) after electron beam welding (EBW) and gas tungsten arc welding (GTAW) processes for candidate materials such as 304L, 316L, and duplex stainless steel(DSS). We investigated the possibility of microstructure control through the application of surface modification processes using friction stir processing (FSP). Corrosion tests on each welded specimen revealed a higher corrosion rate in EBW welds compared to GTAW. Furthermore, it was confirmed that corrosion resistance improved due to phase refinement and redistribution of precipitates when FSP was applied.

• Journal of Yeungnam Medical Science
• /
• v.3 no.1
• /
• pp.49-51
• /
• 1986

Atracurium was used in 10 parturients undergoing elective cesarian section under general Anesthesia. An initial bolus of 0.4 mg/kg of the atracurium was injected after recovery from succinylcholine block. Complete neuromuscular block resulted in all cases. Muscular relaxation was maintained by incremental dose of 0.2mg/kg of atracurium. Administration of atracurium did not cause significant change in blood pressure, pulse rate and infants Apgar score. The residual neuromuscular block could be antagonized at the end of the procedure by mixture of 0.005mg/kg glycopyrrolate and 0.03 mg/kg of neostigmine. In all parturients, antagonism was adequate as evidenced by respiratory response and head lift test. Atracurium may be advantageous in parturients undergoing cesarian section under general anesthesia cause it maintained cardiovascular stability, is non-cumulative, is readily antagonized by neostigmine and has no deleterious effect on the newborn.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.2
• /
• pp.99-108
• /
• 1997

To evaluate the feasibility of mucosal delivery of thyrotropin releasing hormone (TRH) through various mucosae, enzymatic degradation and stabilization of TRH in the nasal, rectal and duodenal extracts of rabbits were studied. TRH in the extracts was assayed by HPLC and its degradation was found to follow apparent first-order kinetics. The residual concentrations of TRH in the mucosal extracts of nasal, rectal and duodenal segments after 24 hr of incubation were found to be $65.1({\pm}1.1),\;19.7({\pm}2.7)$ and 0%, and in the serosal extracts, $65.6({\pm}5.5),\;75.2({\pm}1.1)$ and $68.7({\pm}1.4)%$, respectively. This result suggests that there is a significant difference in the activity of TRH-degrading enzymes among the sites of administration. The inhibition of TRH degradation in the mucosa extracts was kinetically investigated using various additives such as thimerosal, benzalkonium chloride, disodium edetate, ${\sigma}-phenanthroline$, dithiothreitol and dithioerythritol, and $IC_{50}$ values of inhibitors were calculated. The results obtained showed that thimerosal (0.5 mM) and benzalkonium chloride (0.141 mM) protected TRH from the enzymatic degradation in all the mucosa extracts more than 95% after 24 hr of incubation.