• 펄프종이기술
• /
• 제37권3호
• /
• pp.59-65
• /
• 2005

There are accumulations of remained chemical additives and contaminants in the process water of semi-closed linerboard mill. High temperature of the process water aggravates the anaerobic digestion of contaminated process water and causes the generation of hazardous gases, which are from the biological reaction of varied additives and contaminants. The hydrogen sulfide in the gases easily combine with moisture in the air, and become sulfuric acid, which causes corrosion of paper machinery. This hydrogen sulfide is from the reduction of sulfate ions in the process water, and the sulfate ions are mostly from the alum. We changed the alum to PAC (Poly Aluminum Chloride). The results were preventing generation of hydrogen sulfide, and equivalent sizing effect by the use of PAC.

• 펄프종이기술
• /
• 제42권3호
• /
• pp.7-13
• /
• 2010

KOptimization and control of wet-end process provide a key solution to improve paper quality and production efficiency at the same time. Wet-end of paper machine is to determine three important influencing factors of papermaking i.e., retention, drainage and formation. Good formation of paper could be made at the cost of deteriorated retention or drainage. In the same manner increase of retention aid could cause the bad formation of paper. It is very important to find a proper retention chemical which may satisfy one of three factors without the sacrifice of other two. Laboratory scale analyzing or screening chemical additives of wet-end was reported in this study based on RDA sheet molding. Different from the conventional test method, simultaneous consideration of three important wet-end properties could be made by RDA and consequently more reliable prediction of actual paper machine wet-end could be expected.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 춘계학술발표회 논문집
• /
• pp.201-205
• /
• 2011

• 보존과학연구
• /
• 통권20호
• /
• pp.21-47
• /
• 1999

According to damage of papers by the chemical cause, papers become to acidify. Among the 3 kinds of method measuring the acidity of paper, one was nondestructive method measuring the surface of the paper by flat type electrode and the others were destructive methods measuring directly by cold water extract method and hot water extract method. In case of the cellulolytic cultural properties, the latter methods were not applied because those methods must bedissociated papers. To measure the paper acidity nondestructively, we investigated the correlation of the nondestructive method and the destructive methods. The conclusions are as follows. 1) In the relationship of the cold water extract method and the hot water extract method, It was indicated that the pH measured by the hot water extract method was high quality printing paper 0.08, rough printing paper 0.13, and Korean paper 0.29 higher than that by the cold water extract method.2) In the relationship of the cold water extract method and the surface measurement method, It showed that the pH value measured by the cold water extract method was high quality printing paper 1.86, rough printing paper 0.80,and Korean paper 0.58 higher than value that by the surface measurement.3) In the relationship of the hot water extract method and the surface measurement method, It showed that the pH value measured by the hot ABSTRACT water extract method was high quality printing paper 1.78, rough printing paper 0.66, and Korean paper 0.29 higher than that by the surface measurement. From the above-mentioned results, the pH value measured by the surface measurement was need to high about 1.78∼1.86 in high quality printing paper, 0.66-0.80 in rough printing paper, and 0.29∼0.58 in Korean paper and the surface measurement with flat type electrode was very available to measure the acidity of Korean papers actually.

• 펄프종이기술
• /
• 제41권3호
• /
• pp.66-70
• /
• 2009

Paper cultural heritages usually experienced the chemical and the physical deterioration because of various factors including preservation environment and the property of their materials. General restoration technology for paper cultural heritages is the lining. The application of the lining paper and the lining technology has varied depending on researcher's experiences. Therefore, each lining material and technology must be evaluated to develop a standard guide for preservation and restoration of paper cultural heritages. To date, various analysis techniques using lining paper, in terms of their materials, have been applied to analyses of causes and condition of damages, but it is difficult to develop a standard restoration treatment method of paper cultural heritages because it varies by their material. The Hanf, is made frrr the mulberry, is generally used for the lining in Korea.edt is required that the cr, in terms properties and general properties of Hanf, is used for lining papers, are evaluated to develop a standard guide for their restoration.ed this study, the general properties of several lining papers(Hanf), especially dimensave bility, were evaluated as part of the standardization of lining papers. The result have varied depending on the pulping chemical and the manufacturers. the basis weight, thickness and tensale strength of lining papers is bigger the paper treated by natural ash than the paper treated by sodium carbonate.ed case of formation, folding endurance, and dimensave bility, the paper treated by sodium carbonate showed better properties than those of the paper treated by natural ash.

• 한국사회복지학
• /
• 제55권
• /
• pp.55-81
• /
• 2003

본 연구는 한국 사회복지학 연구방법론에 대한 분석과 고찰을 통하여 질적 연구방법의 사회복지학에 대한 유용성을 논의하고자 한 것이다. 이를 위해 본 연구는 사회복지학의 가장 대표적인 학술지인 "한국사회복지학"에 실린 학술논문 538편을 연구 방법론에 초점을 두고 분석한다. 분석 결과, 우리나라 사회복지학은 양적 연구방법에의 과도한 편향이 매우 극심한 상황인 것으로 나타났다. 그러나 1990년대 중반이 되면서 이러한 한계가 지적되어 질적 연구방법을 활용한 논문들이 등장하기 시작하는데, 엄밀성 측면에서 볼 때 방법의 적절성과 수준은 매우 제한적인 것으로 나타났다. 이러한 한국 사회복지학 연구방법론의 동향 분석과 함께 본 연구는 질적 연구방법의 특성과 유형을 정리하면서 한국 사회복지학과 질적 연구방법의 적합성(fitness) 즉 '질적 연구방법이 왜 필요한가' 그리고 '그 유용성은 무엇인가'를 중심으로 논의를 전개한다. 이러한 논의를 통하여 본 연구는 한국 사회복지학의 양적 연구방법에 편향된 상황에 대한 문제를 제기하며, 사회현상의 본질과 실재를 이해하기 위해서는 하나의 방법론이나 패러다임에 얽매이지 않고 사회과학의 많은 연구방법을 적절하게 활용하는 것이 매우 중요함을 제시한다.

• 한국물환경학회지
• /
• 제28권4호
• /
• pp.608-614
• /
• 2012

The effluent limitation of industrial wastewater is based on uniform regulatory criteria for effluent discharge facilities of all in Korea. But, an individual effluent limitation on each effluent discharge facility is widely applicable for regulation of industrial wastewater in US.EPA. To decide an individual effluent limitation, TBEL (Technology-based effluent limitation) and WQBEL (Water quality-based effluent limitation) are used. TBEL is based on the capability of a treatment technology to reduce the pollutants. WQBEL is based on ambient water quality standards. In this study, TBEL were derived for the pulp, paper and paper board manufacturing based on best practicable control technology currently available. It was suggested that effluent limitations were $BOD_5$ 4.7 mg/L, $COD_{Mn}$ 44.3 mg/L, SS 13.2 mg/L, TN 1.4 mg/L, TP 0.15 mg/L and best practicable control technology currently available (BPT) was neutralization, activated sludge treatment and coagulation and sedimentation for the pulp, paper and paper board manufacturing.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.175-178
• /
• 2008

A new laser-addressing method is proposed in this paper. With the characteristic of high power and small spot size, simple structure electronic paper can be addressed only by laser source, and high quality image with 300dpi resolution can be easily achieved.

• STI Policy Review
• /
• 제1권1호
• /
• pp.63-92
• /
• 2010

Recent years have seen an intensified discussion in many OECD countries about the role and mission of public research in the innovation system. This discussion takes place in quite specific national contexts, but should benefit from international experience. However, whereas voluminous literatures address the changing governance methods, organizational forms and missions of universities, much less attention has been devoted to developing a common understanding of the challenges faced by non-university public research institutions. The main goals of this paper is to contribute to clarifying the nature of these challenges, outlines possible policy answers and draws some implications for Korea. In the first section, the paper uses available internationally comparable indicators to review trends in the contribution of government research institutes (GRIs) to R&D and innovation activities. In the second section, the paper identifies the current major changes in the dynamics of innovation that may call for further adjustments in the positioning, organization and steering of public research institutes. Finally, the paper outlines some strategic objectives and orientations for the reform of public research institutes as part of the broader agenda of the Korean innovation strategy.

• 펄프종이기술
• /
• 제42권3호
• /
• pp.50-57
• /
• 2010

A mill trial was performed in a kraft paper mill in order to evaluate the possibility of utilizing dual polymer dry strength aids system consisting of cationic PVAm and anionic PAM. It was found that the cationic PVAm - anionic PAM dry strength additives can improve paper strength without significantly disturbing the stability of the kraft papermaking process when virgin UKP was used as a furnish. Tensile strength (25.3% in machine direction, 48.4% in cross machine direction), elongation of paper (31.6%, 15.6%) and tensile energy absorption (48%, 54%) were improved. Air permeability of the kraft paper was improved as well (22%). Tear strength was decreased with PVAm dry strength aids system, but it can be compensated with decreasing refining degree. In addition, the mill trial results indicate that highly air permeable kraft sack paper can be produced by the addition of PVAm dry strength agents at the stock with reduced freeness.