• Journal of Korea Foundry Society
• /
• v.31 no.5
• /
• pp.288-292
• /
• 2011

In order to complement the drawbacks of quartz crucible such as fragile-like break and melt-leakage through open slit nozzle, a new PFC system has been developed using a common graphite crucible and plugging system. The u melt is fed on to the rotating a roll through slit nozzle by self-gravity. The new equipment was designed and manufactured successfully. An effort for optimizing all related parameter has been made. Then using the optimized parameters about 10 meters u foil having very thin thickness, which meets the target thickness of 130 ${\mu}m$ and enough width more than 60 mm could be made. The thickness homogeneity set improved, due to the lower eddy flowing of the melt flow the self-gravity feeding system.

• Current Photovoltaic Research
• /
• v.6 no.4
• /
• pp.124-132
• /
• 2018

The Korean electric power supply plan was prepared by greatly enhancing the environmental and safety with considering the economical efficiency of the electric equipment, the impact on the environment and the public safety. As a result, the fossil energy-based power generation sector is accelerating the paradigm shift to eco-friendly energy such as solar power and wind. Also the solar power industry is expected to grow into a super large-sized industry by converging the energy storage and electric vehicle industry. Generally, a levelized cost of electricity (LCOE) is used to calculate the power generation cost for different generation power generation efficiency, operating cost, and life span. In this paper, we have studied the future research and development direction of photovoltaic technology development for the era of massive utilization of photovoltaic solar power, and have studied the LCOE of major countries including China, USA, Germany, Japan and Korea. Finally we have reviewed USA and Japan research programs to reduce the LCOE.

• Journal of the Korean Society of Systems Engineering
• /
• v.14 no.1
• /
• pp.52-62
• /
• 2018

A software support system, called procurement engineering management support system (PeMSS), is currently under development through a joint research project. The procurement-related scenarios considered in this research is as follow: an EPC (Engineering, Procurement and Construction) company receives an EPC project contract and starts the project to deliver the agreed system to the acquirer. In order to acquire the required equipments that the EPC company does not produce by itself, it eventually interacts with subcontractors, also called vendors. The EPC company responsibilities during the procurement activities are twofold. First, the EPC company has to guarantee that it has ordered the equipment, through issuing Purchase Order (PO), based on the requirements stated in the contract. Second, the EPC company has to verify that the received equipment designs, called Vendor Print (VP), meet the specifications in the PO, before finally acquiring the equipments. During our survey study, we discovered that EPC company takes a lot of time and effort to create PO and verify VP, mainly because these activities are performed manually by the responsible engineers. Therefore, we intent to support the above activities by developing a support system to the legacy procurement system that can trace the requirements from the contract to the PO and VP, among other functionalities. At the time of the writing of this paper, PeMMS is still under-development, thus, in this paper we focus on presenting the development steps of PeMMS using systems engineering theory and introducing the PO creation function. Wholly, PeMSS attempts to reduce the time and effort of engineers on the procurements activities while also increasing the quality of the procurement outcomes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.649-657
• /
• 2018

It is essential that weapons which are mounted on aircraft need to prove its reliability and safety during its developments. A guided missile should have high reliability and safety throughout various tests which are including ground tests, captive flight tests, detailed technical tests and operational tests. In these various tests, it is vital that software of each component in the guided missile should be easily updated in order to correct algorithms or errors. In this paper, we propose a software update technique based on MDTP(mass data transfer protocol) which are defined in MIL-STD-1760. The proposed techniques have the following advantages: First, software of each unit in a weapon can be updated through a test equipment without disassemble a guided missile. Second, development periods for a software update can be reduced by reusing MDTP. Third, we can easily maintenance of the software because it is based on standard. We proved its efficiency and validity through experiments. Therefore, the proposed technique should be effectively utilized for software update of a weapon mounted on an aircraft during development processes.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.4
• /
• pp.11-16
• /
• 2015

Data center, not only the development of globally of cloud-based IT solutions, As the big data, education, use of development electronic equipment of communication means is increased, Demand of domestic and international data center has increased steadily. Due to the increase of data center demand, heat generation of server rack due to the development of IT equipment is also increasing continuously. Calculating heat value of the data center, because more than 99% of the power usage of IT server is converted into heat, the calorific value as the size and capacity of the server is larger will increase. In this paper, to center the cooling system of air-cooled, and research and development of air conditioning systems for energy reduction of data center, through performance analysis and simulation, it has been analyzed that there is energy savings.

• Management & Information Systems Review
• /
• v.39 no.1
• /
• pp.35-57
• /
• 2020

Recently, research F&E(Facilities and Equipment) have become very important as tools and means to lead the development of science and technology. The government has been continuously expanding investment budgets for R&D and research F&E, and the need for efficient operation and systematic management of research F&E built up nationwide has increased. In December 2010, The government developed and completed a standardized classification system for national research F&E. However, accuracy and trust of information classification are suspected because information is collected by a method in which a user(researcher) directly selects and registers a classification code in NTIS. Therefore, in the study, we analyzed linearly using linear discriminant analysis(LDA) and analysis of variance(ANOVA), to measure the classification accuracy for the standardized classification system(8 major-classes, 54 sub-classes, 410 small-classes) of the national research facilities and equipment established in 2010, and revised in 2015. For the analysis, we collected and used the information data(50,271 cases) cumulatively registered in NTIS(National Science and Technology Service) for the past 10 years. This is the first case of scientifically verifying the standardized classification system of the national research facilities and equipment, which is based on information of similar classification systems and a few expert reviews in the in-outside of the country. As a result of this study, the discriminant accuracy of major-classes organized hierarchically by sub-classes and small-classes was 92.2 %, which was very high. However, in post hoc verification through analysis of variance, the discrimination power of two classes out of eight major-classes was rather low. It is expected that the standardized classification system of the national research facilities and equipment will be improved through this study.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.3
• /
• pp.294-300
• /
• 2015

Objectives: The aim of this study is to identify physicochemical properties such as chemical composition, size, shape and crystal structure of powder byproducts generated from a metallization process and its 1st scrubber in the semiconductor industry. Methods: Powder samples were collected from inner chambers during maintenance of the W-plug process equipment (using tungsten hexafluoride as a precursor material) and its 1st scrubber. The chemical composition, size and shape of the powder particles were determined by field emission scanning electron microscopy (SEM) and transmission electron microscopy (TEM) equipped with an energy dispersive spectroscope (EDS). The crystal structure of the powders was analyzed by X-ray diffraction (XRD). Results: From the SEM-EDS and TEM-EDS analyses, O and W were mainly detected, which indicates the powder byproducts are tungsten trioxide ($WO_3$), whereas Al, F and Ti were detected as low peaks. The powder particles were spherical and nearly spherical, and the particle size collected from the process equipment and its 1st scrubber showed 10-20 nm (agglomerates: 55-90 nm) and 16-20 nm (agglomerates: 80-120 nm) as primary particles, respectively. The XRD patterns of the yellow powder byproducts exhibit five peaks at $23.8^{\circ}$ $33.9^{\circ}$ $41.74^{\circ}$ $48.86^{\circ}$ and $54.78^{\circ}$ which correspond to the (200), (220), (222), (400), and (420) planes of cubic $WO_3$. Conclusions: We elucidated the physicochemical characteristics of the powder byproducts collected from W-plug process equipment and its 1st scrubber. This study should provide useful information for the development of alternative strategies to improve the working environment and workers' health.

• The Research Journal of the Costume Culture
• /
• v.18 no.6
• /
• pp.1194-1210
• /
• 2010

The influence of digital media according to environmental change of multi-media came to have significance more than what we imagine. In accordance with high resolution of HDTV in digital media era, the cautious awareness is required for skin color by the immediate color such as replica of TV color, lighting and clothing. As for the broadcasting makeup expression technique caused by a change in broadcasting environment in the digital media era, the first, There is necessity for natural makeup technique, and for expressing the whole makeup evenly and very delicately. The makeup work gets much more delicate. For the delicate expression, more time is being required than the existing makeup time. Second, Lots of time and manpower are required for elaborate real-object processing on all the production fields such as background set, stage properties, and makeup. Third, Realistic expression is available on the screen. Importance of basic makeup is highlighted. Thus, even the skin care shop came to be prevalent. Development in only HD cosmetics is needed for foundation with fine particle in new material and with diverse colors hereafter. The video-media field is a method that is ignored a sense of distance through vehicles such as camera, picture tube, and several kinds of broadcasting machinery and equipment and that is delivered vividly to viewers through screen, unlike the stage makeup, thereby being needed the makeup technology proper for HDTV according to the changing broadcasting environment and media. The video machinery and equipment are proceeding with being gradually high-tech and precise. Thus, an expert in makeup needs to know common sense on the video machinery and equipment before makeup, and needs to make an effort according to it. And, a follow-up research can be said to be necessary on the advance in makeup method and on more diverse dedicated cosmetics along with a research on color tone proper for HDTV.

• Economic and Environmental Geology
• /
• v.39 no.4 s.179
• /
• pp.417-426
• /
• 2006

Data acquisition is as important as data processing and interpretation in the field of marine geophysical exploration. Marine geophysicist, however, may not have enough information in this field because data acquisition method has been mainly developed by the commercial companies manufacturing the equipment. Therefore, the purpose of this paper is to introduce the general data acquisition method and information to help to construct the systematic and effective survey plan. When a survey plan is set up, the most important thing is to select the seismic equipment based on required penetration depth and resolution, and then construct the survey line intervals. Although a line interval varies from the research purposes, it should be narrower than the expected subsurface structures. Also, if 100% coverage of multibeam data is required, line intervals need to be adjusted based on the equipment characteristics. In case of merging with the preexisting dataset like bathymetry, gravity and magnetic, cross-over errors occurred at the each cross point should be removed to avoid any kinds of misinterpretation.

• Smart Media Journal
• /
• v.9 no.3
• /
• pp.130-141
• /
• 2020

The drone market in Korea is growing with a focus on the use of prevention, defense, exploration and surveying, search and rescue, video shooting, and facility management. However, the foreign dependence on drone's core technologies and components is high. Drone-powered countries such as the US and China are expanding the weaponization of drones, which can intensify trade wars between countries, such as strengthening import and export regulations and monopoly. Therefore, Korea should put R & D and localization of core technology, parts, and accessories of next generation drone first. For this, policy research and investment in infrastructure, equipment, and research personnel should be preceded. This study studied the evaluation of investment priorities by infrastructure sector (facility equipment, utilization field, and demand manpower) to foster small drone companies through literature studies. To this end, we expanded and reclassified e isting research, developed investment prioritization indicators through expert group interviews and reviews, derived future uncertainties, and selected investment priorities by infrastructure sector using AHP techniques. Finally, it proposed an infrastructure construction strategy to foster small drone companies in terms of drone development support, utilization support.