• Tunnel and Underground Space
• /
• v.23 no.4
• /
• pp.271-279
• /
• 2013

This report introduced the types of drilling equipment and their operation mechanisms. The state of the art technologies of the Top-hammer drill equipment were investigated and the technology level of Korean drill industry was compared to that of the advanced country. Based on the investigation, the necessity of fusion research and development in the Korean drilling technology and industry was discussed, and the future strategy to catch up with the advanced technology was suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4496-4502
• /
• 2010

In this paper, for the purpose of improving the future domestic train control systems and securing interoperability according to the global development trends of train control systems, we present the test results of communication interfaces to verify the interoperability between CBTC wayside units tentatively installed in Bundang line that is one of the metropolitan area rail transit systems, and the CBTC onboard units developed through the national R/D project. The CBTC onboard equipment developed, has finished its installation and trial tests in the Bundang shunting yard. For the interoperability test, we should make an interface test with wayside equipment tentatively installed in Bundang line. Due to the safety-critical characteristics of train systems, the site test in the section where the wayside equipment is installed, leads to a danger against safety. Therefore, by way of constructing a simulation environment of train control systems, we confirm the T/R data systems of the equipment for interoperability and test the interoperability by applying these systems to developed CBTC onboard equipment.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.4
• /
• pp.333-341
• /
• 2017

The Korea Atomic Energy Research Institute (KAERI) constructed the PyRoprocessing Integrated inactive Demonstration facility (PRIDE) to carry out experiments on engineering scale pyroprocessing. PRIDE has a large processing cell that human workers are not allowed to access, and thus the equipment inside is operated from outside using remote handling systems. It is therefore essential to examine the operability and maintainability of the equipment in view of remote handling systems, and the equipment is thoroughly examined in a mockup cell before it is installed in the processing cell. If the equipment is tested in a virtual mockup rather than in a mockup cell, the development cost can be significantly reduced. The PRIDE 3D simulator was integrated for virtual verification of equipment that will be installed in the processing cell. All remote handling devices in the actual PRIDE were also virtually installed in the PRIDE 3D simulator. The 3D model of the equipment was loaded and located in the exact position in the virtual processing cell. A scenario to replace an actual electrode was implemented in the PRIDE 3D simulator. The design of the equipment and the working procedures in the scenario were successfully evaluated. The results demonstrated that the PRIDE 3D simulator can be used successfully as an alternative to actual mockup testing.

• Journal of Agricultural Extension & Community Development
• /
• v.4 no.1
• /
• pp.269-281
• /
• 1997

This study intended to compare rural development programs between China and Thailand, focused on research and extension activities. In China, Agricultural Science Administration(ASC) took charges in agricultural research, and under the ASC there were 39 agricultural organizations throughout the country. There were distinctive differences as to condition of agricultural areas, under-developed area at middle and developing area by sea and river. To improve agricultural production in China, diffusion of new agricultural technology would be important along with supplying equipment such as soil test kits, plant nutrition analysis sets and vehcles for extension educators. In Thailand, under the Ministry of Agriculture & Cooperatives, there were five departments, seven divisions and eight national enterprises. Among them, Department of Agriculture was in charge of agricultural research while the Department of Agricultural Extension for extension services. Each department had sub-division and provincial organization including personnel management and budget. However, the relationships and consistency between the Department of Agriculture and the Department of Agricultural Extension needed to be improved for better cooperation of research and extension.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2005.05a
• /
• pp.383-388
• /
• 2005

In this paper Research development about a micro metal forming manufacturing system has been developed. A micro forming system has been achieved in Japan and it's developed micro press is limited to single forming process. To coincide with the purpose to be more practical, research and development is necessary about the press which the multi forming process is possible. We set the development of the equipment including micro deep drawing, micro punching and micro restriking process to the goal. To achieve this goal, Research about micro forming process to be related to multi process forming must be preceded first. Material selection and analysis about micro forming process are accomplished in this paper. And the basis research to make actual system is accomplished.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.294-301
• /
• 2020

Man-In-Simulant Test(MIST) provides a test method to evaluate chemical protective equipments such as protective garments, gloves, footwear and gas mask. The MIST chamber is built to control concentration of chemical vapor that has a activity space for two persons. Non-toxic methyl-salicylate(MeS) is used to simulate chemical agent vapor. We carried out to measure inward leakage MeS vapors by using passive adsorbent dosimeter(PAD) which are placed on the skin at specific locations of the body while man is activity according to the standard procedure in MIST chamber. But more time is required for PADs and there is concern of contamination in PADs by recovering after experiment. Therefore detector for measuring in real time is necessary. In order to analyze in real time the contamination of the personal protective equipment inside the chemical environment, we have developed a wireless real-time gas detector. The detector consists of 8 gas-sensors and 1 control-board. The control-board includes a CPU for processing a signal, a power supply unit for biasing the sensor and Bluetooth-chipset for transmission of signals to external PC. All signals from gas-sensors are converted into digital signals simultaneously in the control-board. These digital signals are stored in external PC via Bluetooth wireless communication. The experiment is performed by using protective equipment worn on manikin. The detector is mounted inside protective equipment which is capable of providing a real-time monitoring inward leakage MeS vapor. Developed detector is demonstrated the feasibility as real-time detector for MIST.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.2
• /
• pp.127-133
• /
• 2011

The following Technology Report was written with respect to recent offshore technology development. This report was prepared with the purpose of suggesting recent offshore technology and upcoming visions by describing the principles of an offshore drilling operation, the NL Tensioner Cylinder Package R & D, and the general technology related to three offshore patent areas, as major contents.

• Nuclear Engineering and Technology
• /
• v.43 no.4
• /
• pp.317-328
• /
• 2011

Pyroprocessing technology was developed in the beginning for metal fuel treatment in the US in the 1960s. The conventional aqueous process, such as PUREX, is not appropriate for treating metal fuel. Pyroprocessing technology has advantages over the aqueous process: less proliferation risk, treatment of spent fuel with relatively high heat and radioactivity, compact equipment, etc. The addition of an oxide reduction process to the pyroprocessing metal fuel treatment enables handling of oxide spent fuel, which draws a potential option for the management of spent fuel from the PWR. In this context, KAERI has been developing pyroprocessing technology to handle the oxide spent fuel since the 1990s. This paper describes the current status of pyroprocessing technology development at KAERI from the head-end process to the waste treatment. A unit process with various scales has been tested to produce the design data associated with the scale up. A performance test of unit processes integration will be conducted at the PRIDE facility, which will be constructed by early 2012. The PRIDE facility incorporates the unit processes all together in a cell with an Ar environment. The purpose of PRIDE is to test the processes for unit process performance, operability by remote equipment, the integrity of the unit processes, process monitoring, Ar environment system operation, and safeguards related activities. The test of PRIDE will be promising for further pyroprocessing technology development.

• Journal of Distribution Science
• /
• v.21 no.9
• /
• pp.35-42
• /
• 2023

Purpose: The research aims at examining the impact of marketer capabilities and persistence on marketer performance and distribution of agricultural product facilities. Research design, data, and methodology: The research employs quantitative methods using a cross-sectional design survey by analyzing the marketer of agricultural production facilities. Sampling was done using the purposive sampling technique and data were taken from 235 respondents. The data were then processed using SEM-PLS. Results: The findings reveal that both marketer capabilities and marketer persistence significantly impact the performance of agricultural product facility marketers. Notably, marketer persistence exerts a more dominant influence on marketer performance than marketer capabilities. Effective communication and coordination between the sales team and the distribution center emerge as crucial factors determining the success of distributing agricultural equipment to reach farmers' land at the optimal time. Conclusions: The findings offer valuable managerial insights for agricultural product facility companies seeking to enhance marketer performance. To achieve this, companies should focus on increasing marketer persistence, with an emphasis on nurture-focused persistence rather than closure-focused persistence. Additionally, improving marketer capabilities is crucial, starting with relationship development, followed by trust building, customer retention, responsiveness, and acquisition. These strategies can collectively contribute to boosting marketer performance within the organization.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.06a
• /
• pp.39-39
• /
• 2006