• Environmental Engineering Research
• /
• 제25권3호
• /
• pp.439-445
• /
• 2020

In the estimation of the aerosol single fiber efficiency using fibrous filters, there is a size range, where the particles penetrate most effectively through the fibrous collectors, and corresponding minimum single fiber efficiency. For small particles in which the diffusion mechanism is dominant, the Cunningham slip correction factor (C_c) affects the single fiber efficiency and the most penetrating particle size (MPPS). Therefore, for accurate estimation, C_c is essential to be considered. However, many previous studies have neglected this factor because of its complexity and the associated difficulty in deriving the appropriate parameterization particularly for the MPPS. In this study, the expression for the MPPS, and the corresponding expression for the minimum single fiber efficiency are analytically derived, and the effects of C_c are determined. In order to accommodate the slip factor for all particle-size ranges, C_c is simplified and modified. Overall, the obtained analytical expression for the MPPS is in a good agreement with the exact solution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1061-1062
• /
• 2007

In this paper, the analysis of some possibilities for increasing the induction motor efficiency is reported. This approach does not require a complete redesign of new laminations with a consistent cost in terms of investments. This paper shows the efficiency of the rectangular core types according to core-cutting-degree and compares the efficiency of the rectangular core types with the round core types. In particular, for obtaining an increase in efficiency, increase of the core axial length has been taken into consideration. The paper shows the results obtained by the finite element method(FEM) and IEEE Std. 112-96 Method B and analyzes the results to get a high efficiency for the induction motor.

• 디지털산업정보학회논문지
• /
• 제17권4호
• /
• pp.161-175
• /
• 2021

This study analyzed the efficiency and influence factors according to the main research institute type of R&D Program for the local community problem-solving. This study applied data envelopment analysis (DEA) method and Tobit regression analysis by using 20 institutions that participated in R&D Program. The results are summarized as follows. First, Analysis results according to the research institute type of R&D project, Efficient DMUs showed more regional innovation institutions than social economy enterprises. But regional innovation institutions were the lowest in the CCR and BCC model. However, efficiency dose not differ between regional innovation institutions and social economy enterprises. Second, as a result of the analysis relation between efficiency and allocation characteristics of R&D input, the participation of regional innovation organizations as participating organizations has a negative effect on efficiency. It was found that the higher the proportion of government subsidies and the higher the employment rate of the vulnerable, which is a social achievement, the positive effect on efficiency. The implication of this study is that the participation of social economy enterprises as the main R&D institution and government R&D support can provide social economy enterprises with opportunities to accumulate R&D capabilities and experience successful commercialization.

• 한국재료학회지
• /
• 제29권5호
• /
• pp.317-321
• /
• 2019

We investigated the characteristics of nano crystalline silicon(nc-Si) thin-film solar cells on graphite substrates. Amorphous silicon(a-Si) thin-film solar cells on graphite plates show low conversion efficiency due to high surface roughness, and many recombination by dangling bonds. In previous studies, we deposited barrier films by plasma enhanced chemical vapor deposition(PECVD) on graphite plate to reduce surface roughness and achieved ~7.8 % cell efficiency. In this study, we fabricated nc-Si thin film solar cell on graphite in order to increase the efficiency of solar cells. We achieved 8.45 % efficiency on graphite plate and applied this to nc-Si on graphite sheet for flexible solar cell applications. The characterization of the cell is performed with external quantum efficiency(EQE) and current density-voltage measurements(J-V). As a result, we obtain ~8.42 % cell efficiency in a flexible solar cell fabricated on a graphite sheet, which performance is similar to that of cells fabricated on graphite plates.

• 한국수산과학회지
• /
• 제44권4호
• /
• pp.366-371
• /
• 2011

The sea squirt Halocynthia roretzi is mainly cultured in Tongyeong, Southern coastal area of Korea. This study presents the physiological rates of respiration, excretion, feeding and assimilation efficiency of the sea squirt Halocynthia roretzi to analyze the SFG(scope for growth) and net growth efficiency, determined during 2007. Oxygen consumption and nitrogen excretion rates increased with a rise in temperature during the summer period whereas feeding rates decreased. The O:N ratio was high during winter(October to February). Assimilation efficiency showed an annual average of 75.4% during the experimental period, except during a period of elevated temperature in July to September(average $25^{\circ}C$). Net growth efficiency($K_2$) was 8.7 to 64.2% except for May to September, when temperature increased at the aquaculture farm. SFG was negative from May to September, reflecting high temperatures and low feeding rates during this period; its highest positive values occurred during winter.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.104-115
• /
• 2009

In case of residential fuel cell system, it is significant to stably supply heat and power to a house with high efficiency and low cost for the successful commercialization. In this paper, the control strategy analysis has been performed to minimize the total cost including capital and operating cost of the residential fuel cell system. The proposed analysis methodology is based on the simulator including the efficiency models as well as the cost data for fuel cell components. The load control strategy is the key factor to decide the system efficiency and thus the cost analysis is performed when the fuel cell system is operated for several different load control logics. Additionally, annual efficiency of the system based on the seasonal load data is calculated since system efficiency is changeable according to the electric and heat demand change. As a result, the hybrid load control combined electricity oriented control and heat oriented control has the most economical operation.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2012년도 춘계학술발표대회 논문집
• /
• pp.522-528
• /
• 2012

Currently, the energy consumption of electric lighting in an office building is accounted for more than 30% of the total energy consumption. In order to reduce the energy consumed by the indoor lighting, the daylight as a natural energy resource can play an important role in energy savings. The daylight can have positive impacts on improvement of work efficiency and productivity, and also make people feel more psychologically stable. Moreover, by using the daylight, we can definitely reduce the energy consumption in office buildings. Thus, the purpose of this study is to determine the LED dimming ratio depending on the ratio by calculating the amount of artificial illumination required according to the change of daylight by using the light simulation software that can quantify and visualize the performance of daylight. As a result, the energy savings could be obtained up to 30%.

• 수산해양기술연구
• /
• 제50권1호
• /
• pp.50-57
• /
• 2014

The performance of five kind adsorbents, which can reduce nitrogen oxide (NOx) from the diesel engine occupying 85% of the fishing boat, was carried out and the emission reduction filter was manufactured and evaluated in the adsorption efficiency of the emission gas for 240 KW diesel portable generator. As a NOx emission filter made of mordenite which has an excellent cation exchange capacity was manufactured by ball type adsorbents having excellent specific surface area. The adsorption efficiency of mordenite material applying the emission reduction filter began to show up at the operating time 10 minutes in comparison with the activated carbon and zeolite materials, and it was exposed to continue until 100% capability with passing by 20 minutes. So the adsorption efficiency of the NOx reduction filter consistently maintained at the averaged 80%.

• Bulletin of the Korean Chemical Society
• /
• 제28권8호
• /
• pp.1383-1388
• /
• 2007

Recently, the semiconductor and display industries have tried to reduce the emissions of perfluorocompounds (PFCs) from the globally environmental regulation. Total amount of PFC emission can be calculated from the flow rate and the partial pressures of PFCs. For the precise measurement of PFC emission amount, the mass flow controlled helium gas was continuously injected into the equipment of which scrubber efficiency is being measured. The partial pressures of PFCs and helium were accurately measured using a mass spectrometer in each sample extracted from inlet and outlet of the scrubber system. The flow rates are calculated from the partial pressures of helium and also, PFC destruction and removal efficiency (DRE) of the scrubber is calculated from the partial pressure of PFC and the flow rate. Under this method, the relative expanded uncertainties of the flow rate and the partial pressures of PFCs are ± 2% (k = 2) in case the concentrations of NF3 and SF6 are as low as 100 μmol/mol.

• 한국수소및신에너지학회논문집
• /
• 제21권3호
• /
• pp.241-247
• /
• 2010

An Energy Efficiency Resource Standards (EERS) is a simple, market-based mechanism to encourage more efficient generation, transmission, and use of electricity, natural gas and heat. An EERS consists of electric, gas and/or heating energy savings targets for utilities, often with flexibility to achieve the target through a market-based trading system. In this paper, we make persons acquainted with EERS programs of foreign countries in these days. And we analyze domestic energy demand side management (DSM) programs in order to introduce an EERS program into the country successfully. Energy efficiency potential calculated in 2007 is one of the important factors for establishing an EERS program domestically. This study may provide basic data to set the amount of energy saving when an EERS program would be phased in.