• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.1-8
• /
• 2011

The purpose of this study is to suggest the optimized transfer algorithm of earthwork considering the precluded area such as the lake, bogs. The earthwork transfer plan in massive cutting and banking should be established because of affecting the construction cost highly. Until now, there was the study about the optimized earthwork transfer model considering the OR(Operating Research). but isn't the study about the model considering the precluded area such as the lake, bogs. In most cases, the engineer adjusts the earthwork transfer path considering the precluded area, manually. The presented model suggests to calculate various visibility paths with $A^*$algorithm after converting the precluded area to polygon topology. By using this paths, the minimum cost path to optimize the earthwork transfer can be obtained. In this study, the validity of the model was proved as implementing the system for the optimized earthwork transfer considering the precluded area.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.79-84
• /
• 2003

The main objective of this study was to investigate the chemical characteristics of post-harvest biomass burning aerosols from field burning of barley straw in late spring and rice straw in late fall in rural area in Korea. 12-hr integrated intensive sampling of $PM_{10}$ and $PM_{2.5}$ biomass burning aerosols had been conducted continuously at Gwangju, Korea 4-15 June 2001 and 8 October-14 November 2002. The fine and coarse particles of biomass burning aerosols were collected for mass, ionic, elemental, and carbonaceous species analysis. Average fine and coarse mass concentrations of biomass burning aerosols were measured to be 129.6, 24.2 ${{\mu}gm}^{-3}$ in June 2001 and 47.1, 33.2 ${{\mu}gm}^{-3}$ in October to November 2002, respectively. Exceptionally high level of $PM_{2.5}$ concentration up to 157.8 ${{\mu}gm}^{-3}$ well above 24-hour standard was observed during the biomass burning event days under stagnant atmosphere condition. During biomass burning periods dominant ionic species were $Cl^{-}$, ${NO_3}^{-}$, ${SO_4}^{2-}$, and ${NH_4}^{+}$ in fine and coarse mode. In the fine mode $Cl^{-}$ and ${KCl}^{+}$ were unusually rich due to the high content of the semiarid vegetation. High OC values and OC/EC ratios were also measured during the biomass burning periods. Increased amount of fine aerosols with high enrichment, which were originated from biomass burning of post-harvest agricultural waste, resulted in extremely severe particulate air pollution and visibility degradation in the region. Particulate matters from open field burning of agricultural wastes cause great adverse impact on local air quality and regional climate.

• Journal of Advanced Navigation Technology
• /
• v.18 no.6
• /
• pp.562-568
• /
• 2014

This study is safety assessment standard for advanced surface movement guidance control system (A-SMGCS) and case study of the past research project. A-SMGCS providing routing, guidance and surveillance for the control of aircraft and vehicles in order to maintain the declared surface movement rate under all weather conditions within the aerodrome visibility operational level while maintaining the required level of safety. Recently, in korea and europe are developing A-SMGCS system for the safety control of the airport movement area. In safety oriented industry such as aviation that it is necessary to verify and ensure for operating system. In this case study, analysis of safety assessment standard for verified A-SMGCS target level of safety (TLS) and previous developed A-SMGCS research project.

• The Journal of Society for e-Business Studies
• /
• v.17 no.2
• /
• pp.87-104
• /
• 2012

Ubiquitous City is emerging as a new paradigm in future city development. U-City is nationwide project for future strategy to implement sustainable city environment and solve several issues in urban area. And as worldwide leading role on future city research, there are lots of U-City related researches in Government and Industry sector. However, it has raised unsustainable development concerns that indiscriminate promotion and visibility for long-term effects because it is not conducted an assessment. Thus, to overcome these problems and in order to develop a more stable U-City project, need to a fundamental consideration about U-City evaluation. This study is to provide the evaluation framework for Ubiquitous City(U-City). The framework is consisted of evaluation dimensions derived from characteristics of U-City development project. From this research, we expect it helps U-City development to be inspected and managed.

• Journal of Periodontal and Implant Science
• /
• v.47 no.1
• /
• pp.41-50
• /
• 2017

Purpose: The aims of the present study were to compare the image quality and visibility of tooth cracks between conventional methods and swept-source optical coherence tomography (SS-OCT) and to develop an automatic detection technique for tooth cracks by SS-OCT imaging. Methods: We evaluated SS-OCT with a near-infrared wavelength centered at 1,310 nm over a spectral bandwidth of 100 nm at a rate of 50 kHz as a new diagnostic tool for the detection of tooth cracks. The reliability of the SS-OCT images was verified by comparing the crack lines with those detected using conventional methods. After performing preprocessing of the obtained SS-OCT images to emphasize cracks, an algorithm was developed and verified to detect tooth cracks automatically. Results: The detection capability of SS-OCT was superior or comparable to that of trans-illumination, which did not discriminate among the cracks according to depth. Other conventional methods for the detection of tooth cracks did not sense initial cracks with a width of less than $100{\mu}m$. However, SS-OCT detected cracks of all sizes, ranging from craze lines to split teeth, and the crack lines were automatically detected in images using the Hough transform. Conclusions: We were able to distinguish structural cracks, craze lines, and split lines in tooth cracks using SS-OCT images, and to automatically detect the position of various cracks in the OCT images. Therefore, the detection capability of SS-OCT images provides a useful diagnostic tool for cracked tooth syndrome.

• Smart Structures and Systems
• /
• v.25 no.1
• /
• pp.111-122
• /
• 2020

Researchers up to date have introduced several Structural Health Monitoring (SHM) techniques with varying advantages and drawbacks for each. Satellite positioning systems (GPS, GLONASS and GALILEO) based techniques proved to be promising, especially for high natural period structures. Particularly, the GPS has proved sufficient performance and reasonable accuracy in tracking real time dynamic displacements of flexible structures independent of atmospheric conditions, temperature variations and visibility of the monitored object. Tall structures are particularly sensitive to oscillations produced by different sources of dynamic actions; such as typhoons. Wind forces induce in the structure both longitudinal and perpendicular displacements with respect to the wind direction, resulting in torsional effects, which are usually more complex to be detected. To efficiently track the horizontal rotations of the in-plane sections of such flexible structures, two main issues have to be considered: a suitable sensor topology (i.e., location, installation, and combination of sensors), and the methodology used to process the data recorded by sensors. This paper reports the contributions of the measurements recorded from dual frequency GPS receivers and uni-axial accelerometers in a full-scale experimental campaign. The Canton tower in Guangzhou-China is the case study of this research, which is instrumented with a long-term structural health monitoring system deploying both accelerometers and GPS receivers. The elaboration of combining the obtained rather long records provided by these two types of sensors in detecting the torsional behavior of the tower under ambient vibration condition and during strong wind events is discussed in this paper. Results confirmed the reliability of GPS receivers in obtaining the dynamic characteristics of the system, and its ability to capture the torsional response of the tower when used alone or when they are combined with accelerometers integrated data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.153-154
• /
• 2013

In this study, we used the program of three-dimensional analysis of fire for analyzing visibility of smoke flow and temperature of the accommodation area what is required for the analysis of survival of the crew. In particular, I would like to propose a method for reducing the flow rate performance in order to reduce the suffocation from the smoke of the majority of personal injury. Existing vessels are designed to close the fire door automatically when the fire alarm issued. When there is no crew that dared to escape, it can delay the spread of fire and smoke flow which is determined to be very useful to improve the survival rate of the crew. However, it can be fatal to the crew whose rooms are located on the inside of the fire door that has not completed the evacuation. In this study, we check the smoke flow rate and rate of temperature rise when crew open the fire door what is closed due to fire and compare to the structure of the blocking layer.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.111-119
• /
• 2011

This study was designed to provide basic data applicable to fire investigation through consideration of combustion products and propose vulnerability of combustibles through analysis of $CO_2$ emission. In order to achieve these research objectives, characteristics of combustion products such as smoke release rate of each part(raw leaves, branches and barks), $CO_2$ emission and ash production were considered targeting on 6 oak species(Quercus variabilis Blume, Quercus aliena Blume, Quercus serrata, Quercus mongolica Fisch, Quercus dentata Sapling and Quercus acutissima) using cone calorimeter and smoke density tester. As a result, it was found that raw leaves release smoke more relatively than branches and barks, when they burn, and that Quercus variabilis Blume has the highest smoke density. Also, Quercus acutissima released CO and $CO_2$ which are respectively, 6.67 times and 1.43 times more than Quercus variabilis Blume with low $CO_2$ emission. In addition, branches released CO and $CO_2$ more relatively. There was a big difference in ash production among raw leaves(3.1 g), branches(10.5 g) and barks(16.43 g). It was identified that Quercus serrata produces ashes which are nearly 9.95 times more than Quercus variabilis Blume. It demonstrates that Quercus serrata contains relatively higher minerals and that Quercus variabilis Blume can leave lots of traces like stain and carbonization, as it releases smoke a lot and it's difficult to predict visibility, when a forest fire breaks out in its community area. It is also considered that smoke particles containing oil in the air leave strain on the surface of a tree, and that CO and $CO_2$ emission increases, when crown fire to burn branches breaks out.

• Journal of the Korean Institute of Gas
• /
• v.14 no.6
• /
• pp.31-37
• /
• 2010

In this study, to propose the analysis method of heat and smoke behavior of fire using the CFD-based fire simulator FDS, comparison of the simulation results against the experimental results and the sensitivity of the results to the grid sizes have been investigated. For the wood fire, thermal images captured from the experiments were compared against the FDS simulations, and the maximum temperatures agreed in~4.3 % error, showing the applicability of FDS in the interpretation of the fire phenomena. In the aspect of the sensitivity to the grid size for the subway fire, FDS results of smoke temperature, CO concentration and visibility converged and showed no distinct changes for the grid size < $28(L){\times}28(W){\times}14(H)$, guaranteeing that the FDS fire model set in this research could interpret the fire phenomena successfully.

• Research in Community and Public Health Nursing
• /
• v.32 no.3
• /
• pp.312-324
• /
• 2021

Purpose: Tuberculosis is an infectious condition with a high disease burden, and the stigma in patients with tuberculosis causes negative health outcomes. The purpose of this study was to define and clarify the concept of self-stigma among patients with tuberculosis. Methods: The analysis was conducted using Walker and Avant's conceptual approach. Twenty-seven studies met the selection criteria. Results: Self-stigma in patients with tuberculosis can be defined by the following attributes: 1) self-esteem decrement; 2) fear; 3) negative emotions to oneself; 4) social withdrawal; and 5) discrimination. The antecedents identified were 1) inappropriate knowledge of tuberculosis, 2) spread of improper health information through media and social communications, 3) stereotypes and prejudices, 4) visibility due to symptoms appearing, 5) recognizing the risk of infection, and 6) low financial status. The consequences were 1) concealing the disease, 2) treatment delay, 3) poor treatment adherence, 4) poor quality of life, and 5) deterioration in or lack of social activities. Conclusion: The definition and attributes of self-stigma identified by this study can be applied to enhance the understanding of stigma in tuberculosis patients and to improve communications between healthcare providers and researchers. It can also be used to develop theories and measurements related to stigma in patients with tuberculosis.