• Journal of KIISE
• /
• v.43 no.6
• /
• pp.662-667
• /
• 2016

As electric and electronic control systems have sharply increased in vehicles, safety accident has emerged as an important issue. Therefore, in order to ensure safety of the vehicle, engineers are required to identify the hazards utilizing PHA and HAZOP, etc. in the early phase of development and implement safety mechanisms to prevent them. HAZOP has been widely used in a systematic manner based on guidewords. However, HAZOP identifies malfunctions from the top-level functionality provided by the system, so it cannot sufficiently identify hazards during the system operation. This leads to restrictions in designing testcases, because the safety requirements are derived from only some of the hazards. This research aimed to provide a hazard identification method utilizing Use case description, which defines operation procedure of the system and HAZOP and a testcase design method based on safety requirements. We introduced a case study on Smart Key Control System in vehicles and compared with hazards identification results based on HAZOP, to demonstrate the effectiveness of this study. The result of this study could potentially reduce development cost and increase system quality by adequately identifying hazards and safety requirements and designing the related testcase.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.133-137
• /
• 2016

Millimeter wave wireless communication systems, especially those targeting indoor high rate data transfer, have a strong requirement for high quality wireless link. Unfortunately, in this frequency band, the electromagnetic wave has to sustain the high propagation loss caused by the smaller wavelengths. In this scenario, beamforming technique, which enhances the link quality by focusing the radiation power on a direction, becomes one of the most important techniques in millimeter wave band wireless communication. In recent year, there been conducted many research on beamforming to improve the performance of wireless system. In this paper, we evaluate the performance of a simplified codebook-based beamforming scheme which is based on multiple-procedure and three-state beam selection. The simplified scheme significantly reduces beamforming setup time, comparing to the exhaustive searching, two-level searching adopted in IEEE 802.15.3c standard, and also conventional multi-level scheme.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.5
• /
• pp.715-724
• /
• 2005

Recently many important systems that used to be operated in a closed environment are now providing web services and these kinds of web-based services are often an easy and common target of attacks. In addition, the great variety of web content and applications cause the development of new various intrusion technologies, while the misuse-based intrusion detection technology cannot keep the peace with the attacks and it seems to lack the capability to deal with such various new security threats, As a result it is necessary to research and develop new types of detection technologies that can detect newly developed attacks and intrusions as well as to be able to deal with previous types of exploits. In this paper, a HTTP traffic model is tested for its anomaly by using a HTTP request traffic pattern analysis and the field information analysis of the HTTP packet. Consequently, the HTTP traffic models by applying anomaly tests is designed and established.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.503-510
• /
• 2016

In recent years, owing to the growing user demand for the two-way internet service based on the move global broadband communications, a new type of satellite terminal has developed, known as earth station in motion (ESIM). This service was required by Resolution 158 (WRC-15) to study on the coexistence with the co-primary fixed service (FS) in 27.5-29.5 GHz as a FSS uplink. In this paper, four scenarios was introduced to account for the antenna pointing error and the azimuth for an analysis on the sharing between ESIM and FS. From analysis results, the required separation distance between two systems should be about 32~52 km according to the elevation angles of $20^{\circ}{\sim}40^{\circ}$ using thresholds of 5% and 10% outage probability. Therefore, it is necessary to control the azimuth angle due to a moving terminal as well as the pointing error of ESIM to minimize the required separation distance and to protect the co-primary FS.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.528-538
• /
• 2016

In this paper, an extend kalman filter based relative navigation algorithm is proposed for Link-K based relative navigation. Link-K is a tactical data link system for joint operation capability upgrade of ROK forces. Link-K is inter-operable with Link-16 and transmit and received information of operations and target. In Link-K communication channel, PPLI message including transmitter position and TOA measurement can be used for relative navigation. Therefore Link-K based relative navigation system can be operated. In this paper, software based simulations were carried out for operational feasibility test and performance verification as error factors of proposed Link-K based relative navigation system.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.939-948
• /
• 1999

주문형 비디오나 원격 회의 그리고 원격 강의와 같은 멀티미디어 애플리케이션들은 비디오나 오디오와 같은 멀티미디어 트래픽을 유발한다. 이러한 멀티미디어 트래픽의 가장 큰 특성은 폭주성이다. 폭주성은 통신망의 효율을 떨어뜨리는 매우 중요한 요인이며, 따라서 폭주성에 대처할 수 있는 효율적인 대역폭 할당 정책이 통신망 관리에서 매우 중요하다. 본 논문에서는 멀티캐스팅 방식의 온라인 비디오 애플리케이션에 대해서 대역폭 완화 작업이라고 불리우는 효율적이고 유용한 대역폭 할당 방안을 설계하였다. 본 논문에서 제시하는 새로운 대역폭 완화 기법은 비디오 서버에서 이미 전송된 데이타의 특성을 이용하여 대역폭 완화창의 크기를 조절하는 동적인 기법이다. 몇 가지 MPEG 트레이스들로 실험했을 때 기존의 온라인 대역폭 완화 기법과 비슷한 성능을 보이고, 특히 멀티캐스팅 방식의 온라인 비디오 서비스에 대해서는 서버의 자원 효율성을 향상시킴을 알 수 있었다. Abstract All of the multimedia applications such as VOD, teleconferencing, and tele-lecturing invoke multimedia traffic like video or audio traffic. The most important characteristic of these multimedia traffic is the burstiness property. So, bandwidth management is becoming the major part of network management. In this paper, we propose a new and efficient bandwidth management technique called bandwidth smoothing for the multicasting on-line video applications. Our bandwidth smoothing technique reduces as much of the network bandwidth required to transmit on-line video traffic as previously proposed methods, and improves the server's resource utilization especially for the multicast on-line video services.

• The Journal of the Korea Contents Association
• /
• v.16 no.9
• /
• pp.702-712
• /
• 2016

This study aims to compare the government accounting reform of advanced countries and South Korea and suggest policy implications for South Korea. The reform steps are structured down to institutional introduction, institutional formation and institutional stability. I researched the literatures on the government accounting system and compiled research materials from the Finance Ministries, Audit Offices, and Government Accounting Standards Boards websites of New Zealand, US, UK and South Korea. Analysis showed that advanced countries and South Korea have adopted accrual accounting systems which have provided more comprehensive and objective financial information. But the government accounting system of South Korea compared with those of advanced countries needs reform. The suggestions of this study include: expanding range of whole of government financial statements; giving coherence to the public accounting standards; adopting government audit system; and introducing accrual budgeting. However, there are differences between business accounting and government accounting and the differences are considered for government accounting reform.

• The Journal of the Korea Contents Association
• /
• v.20 no.9
• /
• pp.389-396
• /
• 2020

E-authentication is one of the key functions for electronic transactions with the identification function made through the information systems. With the abolition of the mandatory use of public certificates, various private e-authentication services have emerged, and are developing to provide various additional services in addition to e-authentication. In this study, we explored the factors that affect user satisfaction with e-authentication services, compared the relative influence among the factors that we explored, and produced implications that could contribute to strengthening the competitiveness of e-authentication services. Based on the characteristics of e-authentication service, we searched and found four factors such as availability, convenience, added functionality and security. After that, we established and analyzed our research model to analyze the causal relationship between these four factors and user satisfaction. The analysis results showed that availability, convenience and security had significant effects on user satisfaction, but added functionality had no significant impact. In addition, compared to availability and convenience, security had a very strong impact on user satisfaction. This study suggests that e-authentication service providers should make efforts to make users aware of the usefulness of additional services while enhancing security.

• Journal of Internet of Things and Convergence
• /
• v.5 no.2
• /
• pp.73-79
• /
• 2019

Research is underway on services and systems that provide real-time alerts for suffocating gases and potentially explosive materials, but currently smart bend type services are lacking. This study supports real-time identification of explosion hazards due to static electricity in the workplace and immediate elimination of accident occurrence factors, real-time monitoring of worker status and workplace hazards (oxygen, hazardous chemical concentration), and immediate warning and data in case of danger. We propose a method of establishing an accident prevention system through analysis. In this way, various accidents that may occur in industrial sites are monitored using IoT-based intelligent sensor nodes, wireless network technology, data processing middleware, and integrated control system, and real-time risk information at the industrial sites is prevented and accidents are prevented. By supporting a safe working environment, the company can significantly reduce costs compared to post-procurement costs.

• 전기의세계
• /
• v.25 no.6
• /
• pp.8-13
• /
• 1976

The industrial processes have become complicated on a large scale bacause of improvement of productivity, research of efficiency, and shortage of locations to be suited for foundation of factories. Consequently, the instrumentation and control systems for operating these industrial processes have also been highly improved with the development of mass information means. In order to operate these large-sized and complicated industrial processes safely, the man-machine interface for correspondence between man and machines and the instrumentation system regarding process fault processing are playing an important role increasingly. This paper describes recent instrumentation system in the water purifying plant as an example of these industrial processes, and covers both man-machine interface and process fault processing. The annual water supply quantity and diffusion were 2, 000, 000, 000m$^{3}$ and 25.0% in 1950 inJapan, but they amounted to 12, 000, 000, 000m$^{3}$ and 86.7% in 1974, respectively. The demands of water will increase incessantly, while it becomes gradually difficult to secure water sources. Accordingly, local self-governing bodies such as municipal cooperation, towns, and villages often construct a large-scale water purifying plant at one place in common, as required, without constructing respective plants independently. It is an absolute requirement for the water purifying plant to avoid stopping water supply to fullfil its social responsibility from the viewpoints of its public utility enterprise, and also it has gradually become difficult to secure skilled operators enough to cover such water purifying plants that are additionally provided in various districts. Thus, the importance of the man-machine interface for assuring safety operation of the water purifying plant irrespective of unskillfulness of operators as well as the instrumentation system regarding process fault processing, or, safety instrumentation, is more and more increasing as the water purifying plants are on a large scale.