• 대한토목학회논문집
• /
• 제32권1D호
• /
• pp.41-49
• /
• 2012

정보기술 중에서 오랫동안 제조업 분야에서 군림해왔던 바코드 기술을 대체하고 있는 RFID 기술은 제조업뿐만 아니라 국방, 물류, 운동, 건설 등 산업 전반에서의 그 활용 효과가 입증되고 있다. 건설 분야에서도 건축을 중심으로 RFID를 적용하려는 연구들이 계속되고 있지만 단순 공종 또는 자재관리용도의 실험적 적용이 대부분이었다. 이에 본 연구에서는 대표적인 토목공사인 터널공사의 NATM 공법에 대하여 5개 시공 프로세스의 사이클 타임 분석을 목적으로 시공단계별 RFID 적용 방법론을 제시하였고, 실제 현장 적용을 통해 방법론을 검증하였다. 이로써 각 시공단계에서 RFID를 통해 실측 정보를 제공함으로써 향후 공정율 예측 및 후속공종 계획 수립시에 효과적으로 활용될 수 있으며, 토목분야에서의 RFID 현장 적용성을 확대하는 시도가 될 수 있을 것으로 기대된다.

• 대한토목학회논문집
• /
• 제40권5호
• /
• pp.509-520
• /
• 2020

현행 내진설계 일반(KDS 17 10 00)에 따르면 내진설계 시 사용하는 입력지진파에 대한 기준이 명확히 제시되어 있고 실지진파에 대해서는 표준설계응답스펙트럼에 맞추어 보정하도록하고 있으나, 실지진파 선택에 따른 영향이 사전에 평가되지 않아 지진파 선택 시 어려움이 있다. 본 연구에서는 국내외에서 발생한 실지진파에 대하여 국내 설계기준이 제시하는 표준설계응답스펙트럼에 부합하도록 보정한 후, 수치해석을 통하여 필댐의 침하량 변화를 평가하였다. 그 결과 댐 하단에 작용하는 자유장 가속도의 영향보다 댐 마루에서의 최대가속도, 댐제체를 통한 증폭 특성등 제체 상부의 거동이 침하량에 가장 큰 영향을 미치는 것으로 나타났다. 또한, 동일한 표준설계응답스펙트럼으로 보정한 입력지진파일지라도 초기 실지진파와 댐 제체에서의 증폭 특성에 따라 침하량이 달리 평가될 수 있음을 확인하였다.

• 한국전산유체공학회지
• /
• 제21권4호
• /
• pp.40-45
• /
• 2016

The numerical simulation has been performed to predict the performance of the fire suppression system for cabin of shipboard enclosure. The present study aims ultimately at finding the optimal parametric conditions of the mist-injecting nozzles using the CFD methods. The open numerical code was used for the present simulation named as FDS (Fire Dynamics Simulator). Application has been done to predict the interaction between water mist and fire plume. In this study, the passenger cabin was chosen as simulation space. The computational domains for simulation in the passenger cabin were determined following the fire scenario of IMO rules. The full scale of the flow field is $W{\times}L{\times}H=4{\times}3{\times}2.4m^3$ with a dead zone of $W{\times}L{\times}H=1.22{\times}1.1{\times}2.4m^3$. The water mist nozzle is installed in ceiling center of 2.3 m height from the floor, and there are six mattresses and four cushions in the simulation space. The combination patterns of orifices to the main nozzle and the position to install nozzles were chosen as the simulation parameters for design applications. From the present numerical results, the centered-located nozzles having evenly combined orifices were shown as the best performance of fire suppression.

• 디자인학연구
• /
• 제18권1호
• /
• pp.253-262
• /
• 2005

급변하는 멀티미디어시대에 백화점은 지역 소비자들의 문화적 욕구를 충족시키는 장소역할 뿐 아니라 새로운 라이프스타일의 추구와 소비패턴의 연출장소로도 활용되고 있어 소비자들의 구매 욕구를 불러일으키기 위한 비주얼머천다이징의 중요성은 더욱 더 커지고 있다. 본 논문은 백화점 화장품매장에서 여성고객이 화장품을 구매할 때 비주얼머천다이징 전략이 어떠한 영향력이 있는지 그 선호도를 설문조사하여 분석하였는데 그 결과를 보면 다음과 같다. 매장디자인 연출구성에 있어서 색채와 P.P(Point of Sale Presentation)의 선호도가 일반요인인 상품의 품질, 가격, 직원서비스 다음으로 중요한 것으로 나타남에 따라 화장품기업들은 비주얼머천다이징전략을 시행할 때 제품의 판매촉진을 위해 각 브랜드의 차별화 된 트레이드컬러의 제시와 P.P 즉, 분류된 상품의 판매 포인트를 상품정보와 함께 표현, 연출하는 것이 무엇보다 중요하다고 할 수 있다.

• Geomechanics and Engineering
• /
• 제11권3호
• /
• pp.401-420
• /
• 2016

The stability of deep coal roadways with large sections and thick top coal is a typical challenge in many coal mines in China. The innovative Universal Discrete Element Code (UDEC) trigon block is adopted to create a numerical model based on a case study at the Dongtan coal mine in China to better understand the failure mechanism and stability control mechanism of this kind of roadway. The failure process of an unsupported roadway is simulated, and the results suggest that the deformation of the roof is more serious than that of the sides and floor, especially in the center of the roof. The radial stress that is released is more intense than the tangential stress, while a large zone of relaxation appears around the roadway. The failure process begins from partial failure at roadway corners, and then propagates deeper into the roof and sides, finally resulting in large deformation in the roadway. A combined support system is proposed to support roadways based on an analysis of the simulation results. The numerical simulation and field monitoring suggest that the availability of this support method is feasible both in theory and practice, which can provide helpful references for research on the failure mechanisms and scientific support designing of engineering in deep coal mines.

• 한국항해학회지
• /
• 제23권2호
• /
• pp.29-42
• /
• 1999

An accurate method of estimating ship maneuverability needs to be developed to evaluate precisely and improve the maneuverability of ships according to the water depth. In order to estimate maneuverability by a mathematical model. The hydrodynamic forces acting on a ship hull and the flow field around the ship in maneuvering motion need to be estimated. The ship speed new the berth is very low and the fluid flow around a ship hull is unsteady. So, the transient fluid motion should be considered to estimate the drag force acting on the ship hull. In the low speed and short time lateral motion, the vorticity is created by the body and grow up in the acceleration stage and the velocity induced by the vorticity affect to the body in deceleration stage. For this kind of problem, CFD is considered as a goof tool to understand the phenomena. In this paper, the 2D CFD code is used for basic consideration of the phenomena to solve the flow in the cross section of the ship considering the ship is slender and the water depth is large enough. The flow fields Added and hydrodynamic forces for the some prescribed motions are computed and compared with the preliminary experiment results. The comparison of the force with measurement is shown a fairly good agreement in tendency. The 3D Potential Calculation based on the Hess & Smith Theory is employed to predict the surge, sway added mass and yaw added moment of inertia of hydrodynamic coefficients for M/V ESSO OSAKA according to the water depth. The results are also compared with experimental data. Finally, the sway added mass of hydrodynamic coefficients for T/S HANNARA is suggested in each water depth.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.455-466
• /
• 2020

This paper presents analysis of the interaction between tunnel and Qanat with a particular interest for the optimization of Qanat shape using the discrete element code, PFC2D, and the results will be compared with the FEM results of PLAXIS2D. For these concerns, using software PFC2D based on Discrete Element Method (DEM), a model with dimension of 100m ^⁎ 100 m was prepared. A circular tunnel with dimension of 9 m was situated 20 m below the ground surface. Also one Qanat was situated perpendicularly above the tunnel roof. Distance between Qanat center and ground surface was 8 m. Five different shapes for Qanat were selected i.e., square, semi-circular, vertical ellipse, circular and horizontal ellipse. Confining pressure of 5 MPa was applied to the model. The vertical displacement of balls situated in ground surface was picked up to measure the ground subsidence. Also two measuring circles were situated at the tunnel roof and at the Qanat roof to check the vertical displacements. The properties of the alluvial soil of Tehran city are: γ_dry=19 (KN/㎥), E= 750 (kg/㎠), ν=0.35, c=0.3(kg/㎠), φ=34°. In order to validate the DEM results, a comparison between the numerical results (obtained in this study) and analytical and field monitoring have been done. The PFC2D results are compared with the FEM results. The results shows that when Qanat has rectangular shape, the tensile stress concentration at the Qanat corners has maximum value while it has minimum value for vertical ellipse shape. The ground subsidence for Qanat rectangular shape has maximum value while it has minimum value for ellipse shape of Qanat. The vertical displacements at the tunnel roof for Qanat rectangular shape has maximum value while it has minimum value for ellipse shape of Qanat. Historical shape of Qante approved the finding of this research.

• 복식문화연구
• /
• 제15권1호
• /
• pp.127-136
• /
• 2007

Modern society shares new culture derived from the fusion of various cultures unlike the past culture regulating one phenomenon of certain field as the representative icon of the era. Especially, the phenomenon of globalization acts as the catalytic agent to receive coexistence of variousness easily. Especially, in fashion industry, these flows and the view of naturalism are harmonized and new fashion trend called 'Ethnic' was embossed. As it reflects internal spirit of human being that wants to return to the memory due to expansion of material civilization, the interest in the designer pursuing it is increasing. This study tries to consider the Ethnic style displayed by Chinese American designer, Anna Sui, who pursues the eastern style with full wit and individuality. Anna Sui, who was praised by New York Times for 'the superb harmony of houte couture style and up-to-date style', created another fashion trend, romanticism in New York and she is the worldwide designer representing Ethnic. Like it, the consideration on her Ethnic style reanalyzing as eastern style provides guidance to check how designer's fashion philosophy appears in one category of America and China and new study material that enables us to understand the third world culture code as well as Anna Sui. This confirmation has the meaning as the basic material for the endless challenge to the new style that fashion will go on in the future. Anna Sui was confirmed to have been recognized as a designer who represented the ethnic collection in the United States, exerting the influence with her unique oriental background. Moreover, her design could identify the pivotal point of ethnic image by developing her unique style which is distinct from other designers in terms of silhouette, color, fabric, detail, and so on. This kind of study can provide the basic data required to understand the fashion world of designer in the future.

• 한국농공학회논문집
• /
• 제57권5호
• /
• pp.101-111
• /
• 2015

Establishment of appropriate data in certain formats is essential for agricultural water cycle analysis, which involves complex interactions and uncertainties such as climate change, social & economic change, and watershed environmental change. The main objective of this study was to develop web-based Data processing and Model linkage Techniques for Agricultural Water-Resource analysis (AWR-DMT). The developed techniques consisted of database development, data processing technique, and model linkage technique. The watershed of this study was the upper Cheongmi stream and Geunsam-Ri. The database was constructed using MS SQL with data code, watershed characteristics, reservoir information, weather station information, meteorological data, processed data, hydrological data, and paddy field information. The AWR-DMT was developed using Python. Processing technique generated probable rainfall data using non-stationary frequency analysis and evapotranspiration data. Model linkage technique built input data for agricultural watershed models, such as the TANK and Agricultural Watershed Supply (AWS). This study might be considered to contribute to the development of intelligent watercycle analysis by developing data processing and model linkage techniques for agricultural water-resource analysis.

• 한국측량학회지
• /
• 제36권2호
• /
• pp.67-74
• /
• 2018

본 연구는 대표적인 공간정보 자료인 연속지적도와 수치지형도를 활용하여 국 공유지 무단점유 의심 시설물을 탐지하는 방법론을 제시하였다. 먼저, 국 공유지 대장 자료와 연속지적도를 위치정보를 기반으로 연계하여 국 공유지 공간정보 데이터베이스를 구축하였다. PNU 코드를 활용하여 서로 다른 기관들에서 관리하는 자료들을 하나의 공간정보 DB로 통합하였으며, 연속지적도 상에서 각각의 필지에 대해 국 공유지의 공부상 사용/미사용 여부를 확인하였다. 다음으로 구축된 국 공유지 공간정보 DB와 수치지형도를 활용하여 공부상 미사용 국 공유지 필지에 존재하는 무단점유 의심 시설물들을 탐색하였다. 마지막으로 제안된 방법론을 실험 대상지역에 대해 적용하고 효용성을 평가하였다. 본 연구를 통해 기 구축된 공간정보 데이터들의 활용성을 높이는 동시에 효율적이고 경제적인 국 공유지의 관리가 가능할 것으로 기대된다.