DOI QR코드

DOI QR Code

Evaluation of the Effect of Input Motions on Earthquake-Induced Settlement of Embankment Dams

입력지진파에 따른 지진 시 필댐의 침하량 영향관계 분석

  • 조성배 (K-water연구원 물인프라에너지연구소) ;
  • 김남룡 (K-water연구원 물인프라에너지연구소) ;
  • 김태민 (K-water연구원 물인프라에너지연구소)
  • Received : 2020.04.29
  • Accepted : 2020.08.14
  • Published : 2020.10.01

Abstract

Currently, the criteria for input motions used in dam seismic design are clearly presented in general provisions of seismic design (KDS 17 10 00), and seismic ground motion records should be matched to the standard design response spectrum. However, the effect on the results is not assessed according to the selection of the seismic ground motion records, making it difficult to select seismic input motions. Therefore, in this study, the change in the amount of crest settlement of an embankment dam was assessed through numerical analysis after matching the seismic ground motion records of domestic and overseas earthquakes in accordance with the standard design response spectrum provided in the seismic design code (KDS 17 10 00). The results showed that the behavior of the upper part of the embankment, such as maximum acceleration at the crest and amplification through the dam, rather than the effect of free-field acceleration, had a greater effect on the amount of crest settlement. Moreover, it was confirmed that even an input seismic motion matched to the standard design response spectrum can make a difference in settlement depending on the characteristics of amplification through a dam body.

현행 내진설계 일반(KDS 17 10 00)에 따르면 내진설계 시 사용하는 입력지진파에 대한 기준이 명확히 제시되어 있고 실지진파에 대해서는 표준설계응답스펙트럼에 맞추어 보정하도록하고 있으나, 실지진파 선택에 따른 영향이 사전에 평가되지 않아 지진파 선택 시 어려움이 있다. 본 연구에서는 국내외에서 발생한 실지진파에 대하여 국내 설계기준이 제시하는 표준설계응답스펙트럼에 부합하도록 보정한 후, 수치해석을 통하여 필댐의 침하량 변화를 평가하였다. 그 결과 댐 하단에 작용하는 자유장 가속도의 영향보다 댐 마루에서의 최대가속도, 댐제체를 통한 증폭 특성등 제체 상부의 거동이 침하량에 가장 큰 영향을 미치는 것으로 나타났다. 또한, 동일한 표준설계응답스펙트럼으로 보정한 입력지진파일지라도 초기 실지진파와 댐 제체에서의 증폭 특성에 따라 침하량이 달리 평가될 수 있음을 확인하였다.

Keywords

References

  1. Al Atik, L. and Abrahamson, N. (2010). "An improved method for nonstationary spectral matching." Earthquake Spectra, Vol. 26, No. 3, pp. 601-617. https://doi.org/10.1193/1.3459159
  2. Ang, A. H. S. (1990). "Reliability bases for seismic safety assessment and design." Proceedings, Fourth U.S. National Conference on Earthquake Engineering, EERI Palm Springs, Vol. 1, pp. 29-45.
  3. Arias, A. (1970). A measure of earthquake intensity, Seismic Design for Nuclear Power Plants, edited by Hansen, R. J., MIT Press, Cambridge, Massachusetts, pp. 438-483.
  4. Baeg, J. M., Park, D. H., Yoon, J. M. and Choi, B. H. (2018). "Evaluation of Correlation between Earthquake Induced Settlement of Fill Dams and Ground Motion Parameters." Journal of the Korean Geosynthetics Society, Vol. 17, No. 4, pp. 65-72 (in Korean). https://doi.org/10.12814/JKGSS.2018.17.4.065
  5. Benjamin, J. R. (1988). A criterion for determining exceedance of the operating basis earthquake, EPRI Report NP-5930, Electric Power Research Institute, Palo Alto.
  6. Ha, I. S. (2011). "Evaluation for fundamental periods of domestic rockfill dams with micro-earthquake records." Journal of the Korean Geo-Environmental Society, Vol. 12, No. 6, pp. 53-60.
  7. Hardin, B. O. and Drnevich, V. P. (1972). "Shear modulus and damping in soils: design equations and curves." Journal of the Soil Mechanics and Foundations Division, Vol. 98, No. 6, pp. 603-624 (in Korean). https://doi.org/10.1061/JSFEAQ.0001756
  8. Housner, G. W. (1959). "Behavior of structures during earthquakes." Journal of the Engineering Mechanics Division, ASCE, Vol. 85, No. 4, pp. 109-130. https://doi.org/10.1061/JMCEA3.0000102
  9. Ishihara, K. (1996). Soil behaviour in earthquake geotechnics, Oxford University Press Inc., New York, pp. 36-37.
  10. Kim, J. T., Kim, D. S., Park, H. J. and Kwon, H. K. (2009). "Estimation of dynamic material properties for fill dam: I. In-situ shearwave velocity profiles." Journal of the Korean Geotechnical Society, Vol. 25, No. 12, pp. 69-85 (in Korean).
  11. Kuhlemeyer, R. L. and Lysmer, J. (1973). "Finite element method accuracy for wave propagation problems." Journal of the Soil Mechanics and Foundations Division, Vol. 99, No. 5, pp. 421-427. https://doi.org/10.1061/JSFEAQ.0001885
  12. Lee, J. S. (2013). "Appropriate input earthquake motion for the verification of seismic response analysis by geotechnical dynamic centrifuge test." Journal of the Earthquake Engineering Society of Korea, Vol. 17, No. 5, pp. 209-217 (in Korean). https://doi.org/10.5000/EESK.2013.17.5.209
  13. Lee, J. S. (2016). "Seismic behavior of inverted T-type wall under earthquake Part II: Effect of input earthquake motion." Journal of the Earthquake Engineering Society of Korea, Vol. 20, No. 1, pp. 9-19 (in Korean). https://doi.org/10.5000/EESK.2016.20.1.009
  14. Lee, S. H., Kim, D. S., Choo, Y. W. and Choo, H. K. (2009). "Estimation of dynamic material properties for fill dam: II. Nonlinear deformation characteristics." Journal of the Korean Geotechnical Society, Vol. 25, No. 12, pp. 87-105 (in Korean).
  15. Lysmer, J. and Kuhlemeyer, R. L. (1969). "Finite dynamic model for infinite media." Journal of the Engineering Mechanics Division, Vol. 95, No. 4, pp. 859-878. https://doi.org/10.1061/JMCEA3.0001144
  16. Ministry of Construction and Transportation (MOCT) (1997). Seismic design criteria research (II), Earthquake Engineering Society of Korea (in Korean).
  17. Ministry of Land, Infrastructure and Transport (MLIT) (2018). General seismic design (KDS 17 10 00), Ministry of Land, Infrastructure and Transport, Korea (in Korean).
  18. Ministry of Land, Infrastructure and Transport (MLIT) (2019). Seismic design standard of dam (KDS 54 17 00), Ministry of Land, Infrastructure and Transport, Korea (in Korean).
  19. Nuttli, O. W. (1979). The relation of sustained maximum ground acceleration and velocity to earthquake intensity and magnitude, Miscellaneous Paper S-71-1. Report 16, U.S. Army Corps of Engineers. Waterways Experiment Station, Mississippi, USA.
  20. Park, D. S. (2014). "A study on the seismic resistance of fill-dams by newmark-type deformation analysis." Journal of the Earthquake Engineering Society of Korea, Vol. 18, No. 4, pp. 161-170 (in Korean). https://doi.org/10.5000/EESK.2014.18.4.161
  21. Park, D. S. and Kishida, T. (2018). "Shear wave velocity profiles of fill dams." Soil Dynamics and Earthquake Engineering, Vol. 104, pp. 250-258. https://doi.org/10.1016/j.soildyn.2017.10.013
  22. Park, D. S. and Kishida, T. (2019). "Shear modulus reduction and damping ratio curves for earth core materials of dams." Canadian Geotechnical Journal, Vol. 56, No. 1, pp. 14-22. https://doi.org/10.1139/cgj-2017-0529
  23. Rollins, K. M., Evans, M. D., Diehl, N. B. and Daily III, W. D. (1998). "Shear modulus and damping relationships for gravels." Journal of Geotechnical and Geoenvironmental Engineering, Vol. 124, No. 5, pp. 396-405. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:5(396)
  24. Sarma, S. K. and Yang, K. S. (1987). "An evaluation of strong motion records and a new parameter A95." Earthquake Engineering and Structural Dynamics, Vol. 15, No. 1, pp. 119-132. https://doi.org/10.1002/eqe.4290150109
  25. Sawada, Y. and Takahashi, T. (1975). "Study on the material properties and the earthquake behaviors on rockfill dams." In Proceedings of the 4th Japan earthquake engineering symposium, Tokyo, pp. 695-702 (in Japanese).
  26. Swaisgood, J. R. (2003). "Embankment dam deformations caused by earthquakes." Proceedings of 2003 Pacific Conference on Earthquake Engineering, Christchurch, NZ.
  27. Von Thun, J. L., Rochim, L. H., Scott, G. A. and Wilson, J . A. (1988). "Earthquake ground motions for design and analysis of dams." Earthquake Engineering and Soil Dynamics II - Recent Advances in Ground-Motion Evaluation, Geotechnical Special Publication, Vol. 20, pp. 463-481.
  28. Vucetic, M. and Dobry, R. (1991). "Effect of soil plasticity on cyclic response." Journal of Geotechnical Engineering, Vol. 117, No. 1, pp. 89-107. https://doi.org/10.1061/(ASCE)0733-9410(1991)117:1(89)