• Structural Engineering and Mechanics
• /
• v.72 no.4
• /
• pp.443-454
• /
• 2019

In order to reduce the residual drift of a structure in structural engineering field, a combined structural system (dual) consisting of steel buckling-restrained braced frame (BRBF) along with shear wall is proposed. In this paper, BRBFs are used with special reinforced concrete shear walls as combined systems. Some prototype models of the proposed combined systems as well as steel BRBF-only systems (without walls) are designed according to the code recommendations. Then, the nonlinear model of the systems is prepared using fiber elements for the reinforced concrete wall and appropriate elements for the BRBs. Seismic responses of the combined systems subjected to ground motions at maximum considered earthquake level are investigated and compared to those obtained from BRBFs. Results showed that the maximum residual inter-story drift from the combined systems is, on average, less than half of the corresponding value of the BRBFs. In this research, mean of absolute values of the maximum inter-story drift ratio demand obtained from combined systems is less than the 3% limitation, while this criterion has not been fulfilled by BRBF systems.

• Advances in materials Research
• /
• v.12 no.4
• /
• pp.273-286
• /
• 2023

The fracture mechanics make it possible to characterize the behavior with cracking of structures using parameters quantifiable in the sense of the engineer, in particular the stress field, the size of the crack, and the resistance to cracking of the material. Any structure contains defects, whether they were introduced during the production of the part (machining or molding defects for example). The aim of this work is to determine numerically by the finite element method the stress concentration factor Kt of a plate subjected to a tensile loading containing a lateral form defect with different sizes: a semicircle of different radii, a notch with different opening angles and a crack of different lengths. The crack propagation is then determined using the extended finite element technique (X-FEM). The modeling was carried out using the ABAQUS calculation code.

• Information Systems Review
• /
• v.14 no.1
• /
• pp.37-65
• /
• 2012

This research aims to design and analyze a ubiquitous customer relationship management system based on near field communication which can be applied to stores in off-line environment. The existing customer relationship management system has been used mainly for stores in off-line environment to issue a royalty card, to stamp a seal on the purchase goods, and to manage the history of customers' visits and purchases. But, the existing system has two weaknesses; it makes difficult for a store manger not only to acquire a wealth of customer data but also to systematically manage the acquired data. In particular, the effectiveness and efficiency of the royalty card are questioned when a customer makes purchases in the store in that the customer frequently does not carry it or loses it. So, this research suggests a ubiquitous customer relationship management system where a tag for near field communications is attached to a store in off-line environment; a store manager can collect and manage easily customer's dada and customers can seamlessly acquire store's information. To do this, this research conducts the followings. First, we review the previous researches of customer relationship management to examine the concept of ubiquitous customer relationship management. Second, from the examination, we draw the factors to be considered in ubiquitous customer relationship management system based on near field communication. Third, we propose a scenario where the suggested system is used. Fourth, we analyze the participants' values and the process that will be used for the suggested system. Finally, we discuss the possibility of the application of this system to real business environment from various viewpoints.

• Journal of computational fluids engineering
• /
• v.20 no.2
• /
• pp.52-60
• /
• 2015

The objective of this research lies in the effect of installation parameters influencing on the wind proof performance of the coastal forest for damage prevention. The dissipation ratio of incident wind power is developed as an assessment index to make a lumped parameter study possible. From the real field data of East, West, and South Sea bounded on the Korean peninsula, single and double storied forests were modeled in three-dimensional shape with computer aided design, and so was done the artificial structures such as wind break, sand accumulating fence, and sand dune, etc With a commercial code ANSYS-CFX, the computational result from the comparison of dissipation ratio between single and double storied forest shows the effect of composition, and also the installation effect is investigated for artificial structures with optimal dimension of distance.

• Wind and Structures
• /
• v.18 no.2
• /
• pp.195-213
• /
• 2014

Recently, the horizontal axis rotor performance optimizer (HARP_Opt) tool was developed in the National Renewable Energy Laboratory, USA. This innovative tool is becoming more popular in the wind turbine industry and in the field of academic research. HARP_Optwas developed on the basis of two fundamental modules, namely, WT_Perf, a performance evaluator computer code using the blade element momentum theory; and a genetic algorithm module, which is used as an optimizer. A pattern search algorithm was more recently incorporated to enhance the optimization capability, especially the calculation time and consistency of the solutions. The blade optimization is an aspect that is highly dependent on experience and requires significant consideration on rotor control strategies, wind data, and generator type. In this study, the effects of rotor control strategies including fixed speed and fixed pitch, variable speed and fixed pitch, fixed speed and variable pitch, and variable speed and variable pitch algorithms on optimal blade shapes and rotor performance are investigated using optimized blade designs. The effects of environmental wind data and the objective functions used for optimization are also quantitatively evaluated using the HARP_Opt tool. Performance indices such as annual energy production, thrust, torque, and roof-flap moment forces are compared.

• The Bulletin of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.37.1-37.1
• /
• 2013

We present our study of analyzing the photometric properties of the globular cluster (GC) system which resides in the extended halo of the central bright Coma cluster galaxy NGC 4874. The core of the Coma cluster of galaxies (Abell 1656) was observed with both the HST Advanced Camera for Surveys (ACS) in the F475W (g475) and F814W (I814) and Wide Field Camera 3 IR Channel (WFC3/IR) in the F160W (H160) filters. The data analysis procedure and GC candidate selection criteria are briefly described. We investigate the interesting "tilt" features in color-magnitude diagrams for this GC system and their link to the nonlinear color-metallicity relation for GCs. The NGC 4874's GC system exhibits a bimodal distribution in the optical g475-I814 color and much more than half the GCs fall in the red side at g475-I814 ~ 1.1. This bimodality is weakened in the optical-IR I814-H160 color; the quantitative analysis on the features of both color distributions using the Gaussian Mixture Modeling code proves the bimodalities are different. Both colors, thus, cannot linearly reflect the bimodality of an underlying metallicity, supporting the suggestion that observed bimodalities in extragalactic GC colors are the metallicity-to-color projection effect.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.05a
• /
• pp.18-18
• /
• 2013

A FeRh alloy is a well-known efficient magnetocaloric material and some experimental and theoretical studies of bulk FeRh have been reported already by several groups. In this study we report first-principles calculations on magnetic properties of different thickness FeRh thin films in order to investigate the possibility to enhance further the magnetocaloric efficiency. We used Vienna Ab-initio Simulation Package (VASP) code. We found that the FeRh thin films have quite different magnetic properties from the bulk when the thickness is thinner than 6-atomic-layers. While bulk FeRh has a G-type antiferromagnetic (AFM) state, thin films which are thinner than 6-atomic-layers have an A-type AFM state or a ferromagnetic(FM) state. We will discuss possibility of magnetic phase transitions of the FeRh thin films in the view point of a magnetocaloric effect. And we found 4-, 5-, 6-layers films with Fe surface and 7-layers film with Rh surface are FM and they have dozens eV magnetocrystalline anisotropy (MCA) energy. MCA energy leads to determine energy barrier when magnetic states are changed by external magnetic field.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.4
• /
• pp.16-19
• /
• 2018

This paper presents analytical and numerical simulation approaches on charging characteristics of no-insulation (NI) REBCO pancake coil by using the equivalent circuit model to estimate magnetic performance response in the coil. The analytical methods provide closed form or definite solution in the form of complete mathematical expressions but they are hard to solve the complex problems. Numerical methods have become popular with the development of the computing capabilities to solve the problems which are impossible or very hard to solve analytically. First of all, the equivalent circuit model are proposed to develop the simulation code for both analytical and numerical method. The charging test was performed under critical current to obtain magnetic field induced and terminal voltage through the radial as well as spiral current paths within the coil. To verify the validity of both proposed methods, the simulation results were compared and discussed with the experimental results.

• Quality Improvement in Health Care
• /
• v.10 no.2
• /
• pp.204-215
• /
• 2003

Background : ICD-10 Classification, which is used domestically as well as internationally, has limited use in the clinical practice since it is developed for at disease statistics and epidemiology. Therefore, the purposes of this study were to improve the quality of diagnosis by constructing a new disease classification based on the diagnoses doctors currently make in the clinical setting and connecting this classification with OCS and EMR, and to meet the demands of doctors for high quality medical study data in medical research. Methods : The specialists in each ophthalmic subfield collected clinical diagnoses and abbreviations based on the ophthalmology textbooks and confirmed the classifications. Total number of clinical diagnoses collected was totaled 672, for which ideal diagnoses had been selected and a new model of disease classification model in connection with ICD-10 was constructed. The constructed classification of clinical diagnoses consisted of six steps: the first step was the classification by ophthalmic subspecialty field; the second to fifth steps were the detailed classification by each specialty field; the sixth step was the classification by site. Results : After introducing the new disease classification, research on the use and a pre-post comparison was conducted. The result from the research on the use of the clinical diagnoses in inpatient and outpatient care has shown a gradually increasing tendency. From the pre-post comparison of EMR discharge summary diagnoses, the result demonstrated that the diagnosis was stated correctly and in detail. Since the diagnosis was stated correctly, code classification became correct as well, which makes it possible to construct high quality medical DB. Conclusion : This construction of clinical diagnoses provides the medical team with high quality medical information. It is also expected to increase the accuracy and efficiency of service in the department of medical record and department of insurance investigation. In the future, if hospitals wish to construct a classification of clinical diagnosis and a standard proposal of clinical diagnosis is presented by a medical society, the standardization of diagnosis seems to be possible.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.5
• /
• pp.376-384
• /
• 2018

The aerodynamic far-field noise was computed by an acoustic analogy code using the permeable surface for the UH-1H rotor blade in hover. The permeable surface surrounding the blade was constructed to include the thickness noise, the loading noise, and the flow noise generated from the shock waves and the tip vortices. The computation was performed with compressible three-dimensional Euler's equations and Navier-Stokes equations. The high speed impulsive noise was predicted and validated according to the permeable surface locations. It is confirmed that the noise source caused by shock waves generated on the blade surface is a dominant factor in the far-field noise prediction.