• Journal of the Korean Vacuum Society
• /
• v.14 no.2
• /
• pp.59-68
• /
• 2005

We developed a national medium vacuum standard by static expansion method. A 133 Pa capacitance diaphragm gauge was calibrated and analysed according to the document of 'Guide to the Expression of Uncertainty in Measurement' of ISO. The results showed that the expanded uncertainty of $2.628\times10^{-3}$ Pa at $95\%$ confidence level and coverage factor of k=2.

• Nuclear Engineering and Technology
• /
• v.39 no.5
• /
• pp.655-662
• /
• 2007

Most decision makers in the electricity industry plan their electric power expansion program by considering only a least cost operation, even when circumstances change with differing complexities. It is necessary, however, to analyze a long-term power expansion plan from various points of view, such as environmental friendliness, benefit of a carbon reduction, and system reliability, as well as least cost operation. The objective and approach of this study is to analyze the proper role of nuclear power in a long-term expansion plan by comparing different scenarios in terms of the system cost changes, $CO_2$ emission reduction, and system reliability in relation to the Business-As-Usual (BAU). The conclusion of this paper makes it clear that the Korean government cannot but expand the nationwide nuclear power program, because an increased energy demand is inevitable and other energy resources will not provide an adequate solution from an economic and sustainability point of view. The results of this analysis will help the Korean government in its long-term resource planning of what kinds of role each electric resource can play in terms of a triangular dilemma involving economics, environmental friendliness, and a stable supply of electricity.

• Korean Journal of Materials Research
• /
• v.25 no.7
• /
• pp.330-335
• /
• 2015

A low thermal expansion ceramic, cordierite ($2MgO{\cdot}2Al_2O_3{\cdot}5SiO_2$), was synthesized using pyrophyllite. Pyrophyllite usually consists of $SiO_2$ and $Al_2O_3$, which are the main components of cordierite. $MgCO_3$ and $Al(OH)_3$ were added in various amounts to pyrophyllite and fired for synthesis and sintering. ${\alpha}$-cordierite crystallized from $1000^{\circ}C$ with mixing of 20 wt% $MgCO_3$ and 1.7 wt% $Al(OH)_3$, and un-reacted cristobalite was also detected with the cordierite. As the temperature was increased to $1400^{\circ}C$, the cordierite yield was gradually increased. Powder compacts of the synthesized cordierite were sintered between $1250^{\circ}C{\sim}1400^{\circ}C$; the sintered samples showed a low thermal expansion coefficient of $2.1{\times}10^{-6}/^{\circ}C$ and typical sintering behavior. It is anticipated that it will be possible to synthesize cordierite ceramics on a mass production scale using the mineral pyrophyllite.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.205-207
• /
• 1993

Distribution planning requires comprehensive knowledge about not only distribution but also transmission/subtransmission system expansion plan. At the same time, distribution planning is very time consuming and a series of routine job which involves a lot of experience and efforts of planning engineers. Since the quality of distribution planning depends upon the ability of planning engineers, the economy of investment should be taken into consideration. The object of this study is to establish a computerized distribution planning system which helps distribution engineers finding a new system expansion plan. It provides the engineers with at optimal system expansion plan which satisfies the condition of both reliability and economy.

• Journal of the Korea Convergence Society
• /
• v.11 no.1
• /
• pp.279-284
• /
• 2020

Advances in technology are bringing a lot of change.. Due to Korea's economic growth, domestic companies are expanding overseas unlike in the past.. Recently, many small and medium-sized companies, in addition to large companies, are making inroads in Southeast Asian markets thanks to the Korean Wave. This study used the international academic database scopus to identify trends in the company's overseas expansion strategy. A search was conducted under the title of the word overseas advancement strategy, which secured a total of 153 papers. Abstracts of the research paper were refined for analysis and then analyzed using KoNLP package. As a result, 10 important keywords were derived. The purpose of this study is to identify the research trends of companies in overseas market through these results. This study provides a guideline for future research on overseas expansion strategies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4453-4461
• /
• 2012

In this study, the effect of traffic information satisfaction and expansion by the attitude on traffic information media using the structural equation modeling was evaluated. Research findings showed that the attitude formed by experience with VMS had a positive impact on user satisfaction and expansion on traffic information. Howevr, the expansion on traffic information was not affected significantly. by user satisfaction on traffic information. In other words, If experiences with VMS is positive, higher uset satisfaction on traffic information. In addition, it should be positive to expand traffic information.

• Journal of the Korean Ceramic Society
• /
• v.42 no.5 s.276
• /
• pp.346-351
• /
• 2005

The linear thermal expansions of $UO_2$ and $(U_{1-y}Ce_y)O_2$ pellet were measured from room temperature to $1400^{\circ}C$ as a function of Ce contents (0, 7.63, 14.84, and $21.68 mol\%$) by using the TMA(Thermo-Mechanical Analysis) method. From the measured data, the linear thermal expansion rate, the coefficient of linear thermal expansion and density variation with temperature were calculated, and the best-fitted temperature-dependent equations were recommended. It was shown that the rate and coefficient of $(U_{1-y}Ce_y)O_2$ thermal expansion increased and the density decreased with increasing Ce contents.

• Fashion & Textile Research Journal
• /
• v.13 no.1
• /
• pp.7-16
• /
• 2011

Maximalism is the code which has a power to interpret a fashion phenomenon expressed complexly and variously in the multicultural society. In the 21st century, maximalism which reappeared is not the expression by a method only. It is presenting the experimental design for the new pursuit through the mixture such as expansion, splendor, variety, decoration, distortion of configuration or transformation, and composition. Therefore, this study aims at analyzing expression of fashion design by four types(expansion, decoration, mixture, non-structure) materializing a feature of maximalism expressed in the domestic and foreign collection works from 2005 to 2010. The research results are as follows. 1. Expansion: It was showed artificial, formative, unique, and odd teatures through the expansion of the upper half of the body, the lower half of the body, and both of them. 2. Decoration: It was showed the actual decoration considering functionality and practicality and the decoration emphasizing and unique character and featuring domination and emphasis. 3. Mixture: It was showed through the mixture of the contrary textiles or the different sex image. 4. Non-structure: It showed the non-structure of the avant-garde trend and non-structure through decoration, detail, adjustment direction of a dress.

• Korean Journal of Materials Research
• /
• v.30 no.2
• /
• pp.93-98
• /
• 2020

Effective control of the heat generated from electronics and semiconductor devices requires a high thermal conductivity and a low thermal expansion coefficient appropriate for devices or modules. A method of reducing the thermal expansion coefficient of Cu has been suggested wherein a ceramic filler having a low thermal expansion coefficient is applied to Cu, which has high thermal conductivity. In this study, using pressureless sintering rather than costly pressure sintering, a polymer solution synthesis method was used to make nano-sized Cu powder for application to Cu matrix with an AlN filler. Due to the low sinterability, the sintered Cu prepared from commercial Cu powder included large pores inside the sintered bodies. A sintered Cu body with Zn, as a liquid phase sintering agent, was prepared by the polymer solution synthesis method for exclusion of pores, which affect thermal conductivity and thermal expansion. The pressureless sintered Cu bodies including Zn showed higher thermal conductivity (180 W/m·K) and lower thermal expansion coefficient (15.8×10^-6/℃) than did the monolithic synthesized Cu sintered body.

• Korean Journal of Materials Research
• /
• v.31 no.11
• /
• pp.626-634
• /
• 2021

Cu matrix composites reinforced with chopped carbon fiber (CF), which is cost effective and can be well dispersed, are fabricated using electroless plating and hot pressing, and the effects of content and alignment of CF on the thermal properties of CF/Cu composites are studied. Thermal conductivity of CF/Cu composite increases with CF content in the in-plane direction, but it decreases above 10% CF; this is due to reduction of thermal diffusivity related with phonon scattering by agglomeration of CF. The coefficient of thermal expansion decreases in the in-plane direction and increases in the through-plane direction as the CF content increases. This is because the coefficient of thermal expansion of the long axis of CF is smaller than that of the Cu matrix, and the coefficient of thermal expansion of its short axis is larger than that of the Cu matrix. The thermal conductivity is greatly influenced by the agglomeration of CF in the CF/Cu composite, whereas the coefficient of thermal expansion is more influenced by the alignment of CF than the aggregation of CF.