• Journal of the Korean Society of Marine Environment & Safety
• /
• v.9 no.1
• /
• pp.25-31
• /
• 2003

In 1994, the International Maritime Organization (IMO) adopted the International Safety Management Code (ISM Code) as SOLAS convention to ensure the safe operation of ships and to protect marine environment from pollution In December 2002, the IMO adopted the International Ship and Port Facility Security Code (ISPS Code) in the Chapter XI-1 of SOLAS to ensure the security of ships, crew, cargo and port facility. With 1 July 2004 being the coming into effective date of ISPS Code, there is a sense of urgency among the shipping companies and port authorities to accomodate the ISPS Code. Although both the ISM Code and the ISPS Code are based on the management system concept introduced in the ISO 9001, two Codes pursue different objective. Accordingly, it is meaningful to compare and analyze the requirements of three standards. In this article, the backgrounds, principles and requirements of three standards are analyzed and presented to offer several suggestions on the establishment and implementation of security measures in compliance with the ISPS Code to the shipping industry in time.

• Computers and Concrete
• /
• v.22 no.1
• /
• pp.101-116
• /
• 2018

As one of the most important engineering structures, arch dams are huge constructions built with human hands and have strategical importance. Because of the fact that long construction duration, water supply, financial reasons, major loss of life and material since failure etc., the design of arch dams is very important problem and should be done by expert engineers to determine the structural behavior more accurately. Finite element analyses and non-destructive experimental measurements can be used to investigate the structural response, but there are some difficulties such as spending a long time while modelling, analysis and in-situ testing. Therefore, it is more useful to conduct the research on the laboratory conditions and to transform the obtained results into real constructions. Within the scope of this study, it is aimed to determine the structural behavior of arch dams considering experimentally validated prototype laboratory model using similitude and scaling laws. Type-1 arch dam, which is one of five arch dam types suggested at the "Arch Dams" Symposium in England in 1968 is selected as reference prototype model. The dam is built considering dam-reservoir-foundation interaction and ambient vibration tests are performed to validate the finite element results such as dynamic characteristics, displacements, principal stresses and strains. These results are considered as reference parameters and used to determine the real arch dam response with different scales factors such as 335, 400, 416.67 and 450. These values are selected by considering previously examined dam projects. Arch heights are calculated as 201 m, 240 m, 250 m and 270 m, respectively. The structural response is investigated between the model and prototype by using similarity requirements, field equations, scaling laws etc. To validate these results, finite element models are enlarged in the same scales and analyses are repeated to obtain the dynamic characteristics, displacements, principal stresses and strains. At the end of the study, it is seen that there is a good agreement between all results obtained by similarity requirements with scaling laws and enlarged finite element models.

• International Journal of CAD/CAM
• /
• v.6 no.1
• /
• pp.9-17
• /
• 2006

Performing inspections for Hull Condition Monitoring and Assessment as stipulated in IACS unified requirements and IMO's Condition Assessment Scheme (CAS) IMO Resolution MEPC.94(46), 2001, Condition Assessment Scheme, IMO Resolution MEPC.111(50), 2003, Amendments to regulation 13G, addition of new regulation 13H involves a huge amount of measurement data to be collected, processed, analysed and maintained. Information to be recorded consists of thickness measurements and visual assessment of coating and cracks. The amount of data and increasing requirements with respect to condition assessment demand efficient computer support. Currently, due to the lack of standardization for this kind of data, the thickness measurements are recorded manually on ship drawings or tables. In this form, handling of the measurements is tedious and error-prone and assessment is difficult. Data reporting and analysis takes a long time, leading to some repairs being performed only at the next docking of the ship or making an additional docking necessary. The recently started ED funded project CAS addresses this topic and develops-as a first step-a data model for Hull Condition Monitoring and Assessment (HCMA) based on XML-technology. The model includes simple geometry representation to facilitate a graphically supported data collection as well as an easy visualisation of the measurement results. In order to ensure compatibility with the current way of working, the content of the data model is strictly confined to the requirements of the measurement process. Appropriate data interfaces to classification software will enable rapid assessment by the classification societies, thus improving the process in terms of time and cost savings. In particular, decision-making can be done while the ship is still in the dock for maintenance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.201-208
• /
• 2020

Recently, the application of personal proofing service based on social security number(SSN) replacement means for verifying identity in non-face-to-face transactions is increasing. In this paper, we propose a method of applying differentiated personal proofing service on whether identity verification is necessary in the online service provided by ISP and if it is appropriate to apply a certain level of assurance. By analyzing the requirements related to personal proofing required by current ISPs, we analyze the risks for each of the requirements and propose a method of applying differentiated personal proofing service according to the level of identity assurance guarantee to minimize the risks. In applying the proposed method to online service provision, it is possible to reduce user's unnecessary authentication cost by minimizing the application of personal proofing service based on alternative means, and to help protect user personal information by minimizing excessively collected personal information.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.11a
• /
• pp.43-49
• /
• 2002

A7003 alloy has characteristics of their excellent weldability, high corrosion resistance and superior plastic working however the broadening of application for the alloy has been hampered by the lower extrudability associated by Mg content. For improvement of extrudability and enhanced recovery efficiency during Al scrap recyeling, it has been generally practiced to reduce Mg content in A7003 alloy. Therefore, it is necessary to investigate the influence of Mg content on mechanical strength and extrudability of A7003 alloy. For efficient material processing which has small amounts, life cycle assessment in material processing(MLCA) is evaluated. The quantitative analysis of energy requirements and $CO_2$ emission for production of A7003 extruded bar are estimated with different Mg content and billet pre-heating process (heating source by light oil or LPG). In particular, the estimation of energy requirements was performed within shipping and gating range (except the mining and extraction stages)to investigate the influence of the variables on energy requirements and $CO_2$ emission in detail. As Mg content increased, the flow stress and the extrusion pressure for A7003 alloy increased. It has been thought that an increment in extrusion pressure with increasing Mg content is caused by the solid solution hardening of Mg atoms in the matrix and increment in volume fraction of intermetallic compound, $Mg_2Si$. The extrudability and the tensile strength are equal to, or above that of conventional A 7003 alloy even the content of Mg varied from $1.1wt.\%\;to\;0.5wt.\%$ alloy. This means that minimizing the content of Mg in A7003 alloy can enhance recovery efficiency during Al scrap recycling. It can be quoted that rather than Mg content energy source for billet heating is a prime factor to determine the atmospheric $CO_2$ emission.

• The Journal of the Korea Contents Association
• /
• v.10 no.3
• /
• pp.80-91
• /
• 2010

Due to the convergence of broadcasting and communications, IPTV services are spotlighted as the that next-generation multimedia services. IPTV services should have functionality such as unlimited channel capacity, extension of media, QoS awareness and are required increasing traffic and quality control technology to adapt the attributes of IPTV service. Consequently, flow based quality control techniques are needed. Therefore, many studies for providing Internet QoS are performed at IETF (Internet Engineering Task Force). As the buffer management mechanism among IP QoS methods, active queue management method such as RED(Random Early Detection) and modified RED algorithms have proposed. However, these algorithms have difficulties to satisfy the requirements of various Internet user QoS. Therefore, in this paper we propose the Flow based AQM(Active Queue Management) algorithm for the multimedia services that request various QoS requirements. The proposed algorithm can converge the packet loss ratio to the target packet loss ratio of required QoS requirements. And we present a performance evaluation by the simulations using the ns-2.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.362-374
• /
• 2010

Product Lifecycle Management (PLM) is an integrated business approach to manage the creation and distribution of product information throughout the product development process. From the product perspective, PLM encompasses a holistic approach to product development and product information management. It supports the integrated product information in conjunction with the efficient product structures and BOM (Bill Of Material), user interfaces, proper functions, design processes and enterprise integration. Therefore, PLM should not only satisfy required functions as an enterprise software but also offer a systematic method for the efficient application from the initial stage of its development. Recently, many shipyards have been considering the PLM as a strategic solution to get the efficient management of product information such as 3-D models, BOM, drawings, documents, and the other product data. Though many studies on PLM are performed, most of them are performed in a function-based approach adequate for mass productive assembly industries. It could not help having limitations on applying the proper PLM system to the shipbuilding business since the requirements of shipbuilding PLM are too diverse and huge to design the architecture. This study presents the PLM framework which effectively reflects the diverse requirements of shipbuilding PLM. In order to get the macroscopic architecture of shipbuilding PLM, authors suggest the four-tier architecture model which considers the various requirements collected from shipyards. Entities of ship design data are modeled BOM in terms of product structure and hierarchical class diagram. Applicable functions of shipbuilding PLM are also investigated by analysis of issues of ship design. Finally, by reflecting the design process of shipbuilding, To-Be ship design procedure cooperated with the suggested PLM framework has been summarized.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.423-427
• /
• 2017

The IMO approved e-navigation strategy implementation plan made e-navigation adoption visible. In addition, the schedule for the modernization of GMDSS by the ITU was confirmed at the 4th NCSR meeting. Accordingly, we will complement the existing communication system and provide the requirements for the new communication system to be introduced in the future, reflecting all the requirements for the communication system capable of supporting the e-navigation service. Although the communication method for supporting e-navigation service should be capable of providing IP-based data communication basically, it is impossible to provide internet service because of the narrow-band characteristic in the MF/HF frequency bands. In addition, as the existing GMDSS satellite communication service organization expands and new services are introduced, IP based data communication service will be possible, but service restriction resulting from expensive communication cost can be solved by introducing VSAT service.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.279-286
• /
• 2017

The international maritime organization(IMO) has defined performance requirements for future maritime navigation through IMO resolution A.915(22) in 2001. Many DGPS systems currently providing DGPS services do not meet the performance requirements specified in IMO resolution A.915(22). The use of SBAS is considered as one of the DGPS replacement and supplementary system for coping with the increase in demand performance and providing safe positioning service. In particular, since a large amount of budget is required to rearrange the existing DGPS reference stations, a method which transmits differential corrections generated by using SBAS message has been proposed. In this paper, we compare and analyze the performance of NDGPS which is operated by the National Maritime PNT Office of the ministry of oceans and fisheries(MOF) in Korea and MSAS in Japan. Also, we verify that SBAS, as alternative and complementary system, meets the performance requirement specified in IMO resolution A.915(22).

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.584-587
• /
• 2006

Quality assessment of the building is strongly dependent upon satisfying owner's requirements. To develop indicators for the assessment of design quality, survey on current situation of design process and analysis of Design Quality Indicator(DQI) is performed. The survey revealed that the main cause of frequent design changes is variability feature of owner's requirements. DQI, an indicator developed in UK, questionnaire encompasses questions which are relevant throughout the development stages of a building, and can be used at every key stage of the process. Further research will focus on the development of indicators for the assessment of design quality applicable to Korean market. In addition, research on the visualization method to present assessment results and supporting tools to facilitate assessment will be considered.