• 건축역사연구
• /
• 제21권5호
• /
• pp.57-68
• /
• 2012

The purpose of this study is to identify the characteristics of the use of the western building system with the change of the architectural design in the Japanese colonial period focused on the facility built by Joseon Government-General in 1910s. Through the 131 cases of governmental building, the tendency of the use of western building system. After 1910, Japanese Imperialism adopted the western wooden building system which main structure was made with combination of small pieces of timber for building the modern governmental facility because of the political and financial intention. So, all facilities were designed similarly by the structural module and the facade was finished by the feather boarding in the same with the 'sitamitakei-giyohu' in Japan. the functional requirements of each facility was not revealed. Such an western wooden building system was used until 1920s with the change of the facade by the mortar coating. But, in 1920s-1930s, the building system have begun to change. The use of the brick system caused some changes although the planing concept was still lasted. On the other hand, the use of the reinforced concrete led to more changes on the overall scheme.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.166-178
• /
• 2000

As the 21st century signifies an information-oriented society, the computer integration takes place in all walks of human presence. Needs for computer and network-integrated automation present new challenges in military as well as commercial facility systems engineering. Since the first intelligent building appeared in USA in 1984, it gradually became an essential capability for the building industry requirement these days. Intelligent Building System(IBS) is evolving to be very complex because there are many subsystems such as telecommunication(TC), office automation(OA), building automation(BA), security, construction environments, etc. During the planing phase of IBS development, therefore, a disciplined systems engineering must be performed to analyze stake- holder's requirements to build an optimized system while minimizing trial-and-error expenses and risks. This paper presents a conceptual design of BAS applying systems engineering methods. The contribution of this study includes the development of IBS subsystem specification for building automation subsystem, which is a part of IBS, using the methodology of requirement analysis, functional analysis, synthesis, and verification. A computer-aided systems engineering s/w, RDD-100, was used to improve the system design efficiency and to promote the product design knowledge management for reuse in later design programs.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권3_4호
• /
• pp.293-307
• /
• 2003

객체지향 개발이 보편화되었지만 객체지향 프로젝트를 지원하는 소프트웨어 관리 기법에 대한 연구가 미흡하다. 또한, 기존의 소프트웨어 관리 기법을 객체지향 프로젝트에 적용하는 것 역시 어려움이 있다. 특히, 늘어가는 객체지향 기반의 대형 프로젝트에 적합한 프로젝트 계획 기법에 대한 연구가 미흡하다. 본 논문에서는 객체지향 프로젝트를 위한 관리 요소 중 스케줄링에 대한 체계화된 기법을 제안한다. 시스템의 기능적인 요구사항이 기술된 Use Case 다이어그램을 이용하여 객체지향 프로젝트 스케줄을 도출해 가는 과정을 Use Case 식별, 상호의존성 분석을 통한 초기 PERT 차트 작성, 각 Use Case의 특성 규명, Iteration 개수 결정, Iteration에 Use Case 할당, 유용한 자원과 제약 사항 고려, Revised PERT 차트 작성의 7 단계로 나누어 제안한다. 각 단계에 내한 입력 물과 중간 산출물, 그리고 수행 지침을 제시한다. 본 논문의 프로젝트 스케줄링 기법은 짧은 개발 기간 동안 고품질의 소프트웨어 생산에 목적을 둔 프로젝트 계획 단계에서 효율적인 기법으로 사용된다.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.134-146
• /
• 2006

This paper presents the primary conceptual design results of twenty-passenger class Wing-In-Ground(WIG) effect craft. As a first step, top level requirements were proposed and principal dimensions were determined. Maximum speed in ground effect condition is 150 km/h with two tons payload including passengers. Total weight is estimated as 8.5 tons with 2 tons of thrust. Hull and airfoil sections were designed and self propulsion tests were performed by radio controlled model. Two planing hull forms with the transom stern were proposed and towing tests were performed. The resistance and running attitude were measured and the feasibility is checked for the prototype hull form of the twenty-passenger class WIG craft. The free running tests show the stable smooth running attitude at designed speed. Also this radio controlled model can take off around 0.15 meter wave height. It can be said that the top level requirement for the twenty passenger class WIG ship is satisfied successfully. The design optimization to increase the transport efficiency and safety will be performed in the near future.

• 수산해양기술연구
• /
• 제57권4호
• /
• pp.302-315
• /
• 2021

In this study, factors such as improvement of a fishing process and safety, reduction of the labor force and headcount and development of the automation technology for offshore (eel and crab) pot fishing vessels were analyzed. A questionnaire survey was conducted to analyze and select the key factors using independent/paired sample t-test and correlation analysis, and a living lab was operated with ship owners, skippers and experts to discuss practical needs of the site. From the result of questionnaire survey and field requirements, it was possible to understand the level of awareness of ship safety, general safety equipment, fishing work process and fishing safety equipment from the point of view of the field. In addition, there were differences in the measurement results of each items because the working environment and experience were different according to the position of the ship owner and the skipper. The results of the questionnaire survey and various perceptions of field stakeholders were reflected when analyzing the fishing system and fishing process to choose the development equipment applicable to the field. From the analysis results, the selected development equipment based on the fishing equipment and process currently in operation are pot washing device, catch separation and fish hold injection device, length limit regulations and bait ejection device after use, automatic main line winding device, bait crusher, automatic (crab) pot hauling separator and so on.

• 치위생과학회지
• /
• 제23권1호
• /
• pp.1-12
• /
• 2023

Background: This study aimed to identify the present level and needs of clinical dental hygienists and to present the Borich needs assessment and the locus for focus model as integrated priorities. Methods: The participants of this study were dental hygienists working in dental clinics (hospitals). The final data of the 194 participants were analyzed using frequency analysis and a paired sample t-test. To analyze the need for clinical dental hygienists to perform work, the Borich priority determination formula was used. The x-y plane consisting of four quadrants was used to analyze the need using the locus for focus model, which helps to determine the priority while showing visual effects. Results: "Scaling" was the highest required level for clinical dental hygienists, and "panorama taking" was the highest present level. The priorities of educational needs were systematically and visually derived from dental hygienists who were currently working through the Borich needs assessment and the locus for focus model for each task performed in the clinical field. Through the priorities of these two models, a total of 13 items appeared in the common high-level area; "oral health care (disability)," "oral health care (systemic disease)," "applying a rubber dam," "professional mechanical tooth cleaning," "root planing," "taking vital signs," "medication counseling," "wire cutting," "removing cement after removing band/bracket," "delivering bracket," "preparing mini-screw implantation," "dental insurance claim," and "patient reception." Conclusion: Based on the results, the department of dental hygiene should maintain and improve the standardized clinical practice curriculum and clinical dental hygienists' practical skills and contribute to the realization of the legal scope of dental hygienists, reflecting the requirements of clinical fields.

• 한국건설관리학회논문집
• /
• 제13권3호
• /
• pp.25-33
• /
• 2012

본 연구는 교정시설에 대한 시설관리자 측면의 요구사항 도출 및 중요도 분석을 목적으로 수행되었다. 이를 위해 2000년 이후 준공된 교정시설 11곳을 사례대상으로 선정한 후, 선정된 교정시설의 시설관리자에 대한 설문조사를 통해 요구사항을 도출하였다. 이렇게 도출된 요구사항을 기초로 시설관리자 설문조사를 통해 중요도 지수조사한 후 AHP기법을 활용하여 요구사항의 중요도를 분석하였다. 상기와 같은 목적과 방법에 따라 진행된 본 연구의 결론을 요약하면 다음과 같다. 1) 교정시설에 대한 시설관리자 측면의 요구사항은 배치 및 동선, 건축마감, 기계설비, 전기설비의 총 4가지 분야로 도출되었다. 2) 각 분야별 요구사항의 중요도 분석 결과를 정리하면 다음과 같다. 배치 및 동선분야는 건물배치계획(10.9%)이 주요 요구사항으로 선정되었다. 건축마감분야는 차음성개선(14.1%)이 주요 요구사항으로 선정되었다. 기계설비분야는 개별 냉 난방시스템 구축(11.9%)이 주요 요구사항으로 선정되었다. 전기설비분야는 제어장치 개선(12.2%)이 주요 요구사항으로 선정되었다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제23권2호
• /
• pp.73-82
• /
• 2017

Purpose: Since the facility guidelines for National Designated Isolation Unit wards(NDIUs) had been edited since 2016, all hospital who want to expand or install NDIU should adapt the new guidelines. Instead of providing area requirement, by the way, only essential or optional facility requirements are suggested except patient bedroom in the guidelines. So, as analyze area and area composition of the NDIUs, it could be expected that this study has a role as an area planing reference for not only NDIU but also another airborne infection isolation room. Methods: For the area analysis, 18 sample hospitals are selected among 2016 year applicants. All rooms in NDIUs are grouped as zones whether those are negative air pressurized or not and programed room or not. At the end, area of the zones are summarized and analysed a relationship between area increase and bed number by both correlation analysis and regression analysis. In addition, department usable and gross area per bed, N/G ratio, G/N ratio, and average area ratio of each zone is calculated. Results: First of all, rooms in none negative air pressurized zone of the NDIUs haven't shown a regular installation so that only those in negative air pressurized zone are targeted for the area analysis. Second of all, patient room unit(0.92) and support area(0.79), by correlation analysis, are correlated with total net area. Patient room unit(0.94) and total net area(0.79) are also shown a correlation with bed number. Department usable area($R^2=0.63$, y=36.278x + 102) and patient room unit area($R^2=0.89$, y= 27.993x - 0.8924) has a relationship with bed number by regression analysis. Average N/G is shown as 0.85 and G/N 1.36. Average area ratio of circulation, doffing area, patient room unit, and support area are 25.4%, 9.1%, 50.9%, and 14.6% in order. Implications: This study is a basic research for exploring the NDIUs guidelines to find resonable evidence to develop it for its practical use. Still, it is possibly expected that the guideline is to be developed by post occupancy evaluation in the area of where minimum requirement or facility grade needs to be defined, and by further studies with various perspectives.

• 한국정보시스템학회지:정보시스템연구
• /
• 제30권1호
• /
• pp.151-177
• /
• 2021

Purpose This paper aims to improve management performance by effectively responding to production needs and reducing inventory through synchronizing production planning and procurement in the aviation industry. In this study, the differences in production planning and execution were first analyzed in terms of demand, supply, inventory, and process using the big data collected from a domestic aircraft manufacturers. This paper analyzed the problems in procurement and inventory management using legacy big data from ERP system in the company. Based on the analysis, we performed a simulation to derive an efficient procurement and inventory management plan. Through analysis and simulation of operational data, we were able to discover procurement and inventory policies to effectively respond to production needs. Design/methodology/approach This is an empirical study to analyze the cause of decrease in inventory turnover and increase in inventory cost due to dis-synchronize between production requirements and procurement. The actual operation data, a total of 21,306,611 transaction data which are 18 months data from January 2019 to June 2020, were extracted from the ERP system. All them are such as basic information on materials, material consumption and movement history, inventory/receipt/shipment status, and production orders. To perform data analysis, it went through three steps. At first, we identified the current states and problems of production process to grasp the situation of what happened, and secondly, analyzed the data to identify expected problems through cross-link analysis between transactions, and finally, defined what to do. Many analysis techniques such as correlation analysis, moving average analysis, and linear regression analysis were applied to predict the status of inventory. A simulation was performed to analyze the appropriate inventory level according to the control of fluctuations in the production planing. In the simulation, we tested four alternatives how to coordinate the synchronization between the procurement plan and the production plan. All the alternatives give us more plausible results than actual operation in the past. Findings Based on the big data extracted from the ERP system, the relationship between the level of delivery and the distribution of fluctuations was analyzed in terms of demand, supply, inventory, and process. As a result of analyzing the inventory turnover rate, the root cause of the inventory increase were identified. In addition, based on the data on delivery and receipt performance, it was possible to accurately analyze how much gap occurs between supply and demand, and to figure out how much this affects the inventory level. Moreover, we were able to obtain the more predictable and insightful results through simulation that organizational performance such as inventory cost and lead time can be improved by synchronizing the production planning and purchase procurement with supply and demand information. The results of big data analysis and simulation gave us more insights in production planning, procurement, and inventory management for smart manufacturing and performance improvement.

• 한국조경학회지
• /
• 제15권3호
• /
• pp.33-50
• /
• 1988

본 연구는 강원도내 5개시를 대상으로 정원, 공원, 가로, 시청, 학교 등에 식재되어 있는 각종 조경식물을 조사·분석하여 개선방향을 찾고, 아울러 도의 향토적 특성을 나타낼 수 있는 야생식물 들을 선정·제시하고자 수행되었다. 그 결과를 요약하면 다음과 같다. 1. 조사대상지역내 식재되어 있는 식물은 젓나무외 114종의 교목류, 무궁화외 103종의 관목류, 코스모스외 96종의 화초류와 그리고 담쟁이와 2종의 만경류 등 총 319종이었으며, 그중 무궁화, 향나무, 회양목 등이 가장 높은 상재도를 보여 이들이 조경식재용으로 가장 많이 이용되고 있는 것으로 나타났다. 2. 도내 202개의 초·중·고교의 교화 및 교목을 조사한 결과 교목은 33종, 교화는 32종으로 나타났는데 중복되는 종을 제외하면 총 56종이며, 전체적으로 교목으로는 향나무, 교화로는 개나리가 가장 선호되었으나 각 학교별로 선호도의 차이를 보였다. 3. 도내 22개 시·군에서 지정하고 있는 꽃과 나무를 조사한 결과 꽃은 14종, 나무는 7종으로 나타났으며, 꽃으로는 철쭉, 나무로는 은행나무의 지정빈도가 가장 높았다. 또한 이들의 자생종 비율은 나무의 경우 86%로 높았으나 꽃은 50%로 낮았다. 4. 도내 주요 국도변에 식재된 가로수는 총18종 84,939본으로 현사시 33%, 은행나무 16%, 수양버들 11%, 버즘나무 10% 등의 비율로 나타났다. 5. 조사지역내에 식재된 조경식물의 성상별 비율은 낙엽활엽수가 약 56%로 가장 많고, 초목류 28%, 상록침엽수 9.5%, 상록활엽수 3.6%, 낙엽침엽수 1.6% 등의 순이었다. 그리고 가로, 관청, 정원, 공원 등의 식재지별로 자생식물과 외래식물의 비율을 조사한 결과 어느 곳에서나 외래종이 10%이상 더 많이 식재되고 있는 것으로 나타났으며, 전체적으로 자생종 대 외래종의 비율은 43:57이었다. 6. 이상과 같은 결과를 통해 식재수종의 다양화, 공간유형별 적정식물의 선정, 향토종 이용의 일반화 등이 필요하다고 사료되었다. 그리하여 강원도내의 야생식물로서 도특유의 향토미 표출 및 식물종의 다양한 이용을 위해 개발·보급할 가치가 있는 총 254종의 식물을 선정하여 그들의 관상부분, 용도, 성상 등을 제시하였다.