• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.204-210
• /
• 2011

This paper present investigation of interoperable process and interaction-facts between urban and new ATS signalling system for degrading, improvement or replacement in wireless communication-based train control system of urban driverless transit, and investigate interoperable requirement from joint program of cooperation-"wireless communication-based train control system's standard process construction and performance evaluation on urban transit" of first year result.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.1 s.13
• /
• pp.106-113
• /
• 2003

In this study, The matrix method was used with common category concept according to the construction project control system. For the purpose of systematic resource management planning, it should be established on accomplished EVM data for clearing the ordering point according to the attribute procurement analysis. Resource management was presented by connecting the material requirement calculation method and the attribute of procurement method based on the EVM, suggested through analyzing process-data modeling using integrated schedule, cost and material.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1568-1574
• /
• 2009

One of the most difficult problems in user requirement engineering is the communication gap that exists between different end-users, stakeholders, and software engineers. Since scenarios allow different stakeholders to describe and review the problem in their own language instead of some abstract model, they are also a solution to the problem. We propose a progressive, iterative and interleaved process of using scenario at different requirement engineering stages including elicitation, analysis and validation. This process model has been applied to our TRES System. In our proposed system, we combine prototype, scenarios and use cases in a single and comprehensive framework to avoid most of the shortcomings in other tools. Our system is an XML-based system for scenario-driven requirement engineering. Within the TRES system, scenarios are stories capture information about users and their tasks, including the context of use. In our TRES system, scenarios are stored in XML-based database and described using XML notation.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.135-139
• /
• 2001

According to the requirement of cyanide precipitation-purification technology, adopt the acidized sulfate to precipitate cyanide. Studying the influence of acidity and the dosage of sulfate on precipitation rate of impurity ion in cyanide wastewater, and, on the basis of synthetic precipitation experiments, we obtain principle process of cyanide precipitation-purification to technology.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.61-71
• /
• 2008

It is often claimed that the descriptive way of documentation is insufficient to define software requirements as being unambiguous. This is caused by not only the difference of knowledge and understanding of the stakeholder as to system but also the difference in the way of documentation like method of representation as well as depth of description. The study explains the process and results of applying a diagraming tool like UML to improve the requirements of GLORY(GLObal Resource management sYstem) initially defined in descriptive way. Especially, the result shows that the requirements are more accurately improved with the good hierarchies and well-leveled functionalities, with the help of diagraming tool, expecting easy maintenance of requirements and prevention of omission of requirements.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.4
• /
• pp.231-242
• /
• 2003

Multidisciplinary Design Optimization (MDO) is an optimization technique considering simultaneously multiple disciplines such as dynamics, mechanics, structural analysis, thermal and fluid analysis and electromagnetic analysis. A software system enabling multidisciplinary design optimization is called MDO framework. An MDO framework provides an integrated and automated design environment that increases product quality and reliability, and decreases design cycle time and cost. The MDO framework also works as a common collaborative workspace for design experts on multiple disciplines. In this paper, we present the architecture for an MDO framework along with the requirement analysis for the framework. The requirement analysis has been performed through interviews of design experts in industry and thus we claim that it reflects the real needs in industry. The requirements include integrated design environment, friendly user interface, highly extensible open architecture, distributed design environment, application program interface, and efficient data management to handle massive design data. The resultant MDO framework is datasever-oriented and designed around a centralized data server for extensible and effective data exchange in a distributed design environment among multiple design tools and software.

• Journal of Satellite, Information and Communications
• /
• v.2 no.1
• /
• pp.48-55
• /
• 2007

The system requirement definition, system configuration, major parameters for GNSS ground station development are presented in this paper. GNSS ground station system consists of the GNSS sensor station, up link station and monitoring & control system. The GNSS sensor station consists of navigation receiver subsystem which process the GPS and Galileo navigation signal, automic clock subsystem, meteorological data receiving subsystem and navigation data processing subsystem. To communicate the error correction of navigation fate, GNSS sensor station interface with GNSS Control Center.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.335-342
• /
• 2020

ESS(Environmental Stress Screening) is an important production process to remove 'latent defects' introduced in the production of products. Recently, ESS is included in QAR(Quality Assurance Report) as an essential quality assurance requirement for products in the defense business. However, depending on the author of the QAR or the classification of the weapon system, it is often identified that the content and form are different or important elements are omitted. Therefore, this paper proposes a MIL-HDBK-344A based quantitative ESS requirement standard to secure the consistency and completeness of QAR. and to make easier to calculate PE(Precipitation Efficiency), which is an indicator for identifying the latent defects elimination effect.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.3
• /
• pp.177-188
• /
• 2013

The construction industry consists of various and massive architectural information as an architectural process includes a variety of design stages with cooperation of many disciplines. Particularly, architectural information is generated and managed through the life cycle of a building, from conceptual design stage to the construction and maintenance. A Building Information Model (BIM) serves as a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle from inception onward. BIM technology accomplished quantitative development being utilized in various disciplines. However, it is necessary to develop environment and requirement for qualitative improvement of BIM based project. Particularly, requirement is very important for architectural design evaluations. The purpose of this study is to develop and apply of quality control check-list for improving the quality of architectural design in BIM environments. To achieve this purpose, the authors have investigated case study for open BIM data quality control (software, guideline and application case) and classified quality control targets according to physical/logical quality control and data quality. In addition, the authors have defined open BIM based quality control process and developed quality control check-list. Finally, the authors have developed automatic quality check system using requirements for efficient quality control based on open BIM.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.309-313
• /
• 2000

In order to meet the industrial requirement, precision grinding with brush tool has been applied. To analyze the brush tool characteristics, several parameters including numbers of brush string installed in a single holder, depth of cut and brush length have been changed. Several data from various source were acquired using AE, acceleration and tool dynamometer during the process. Consistent results revealing certain trend with respect to each process condition were observed.