• 한국태양에너지학회:학술대회논문집
• /
• 2008.04a
• /
• pp.196-202
• /
• 2008

Effective climate protection is a most important tasks of our time. The BIPV is one of the most interesting and promisingly possibilities of an active use of solar energy at the building. In this study it was analyzed by the case study the function of the requirement of the BIPV-module as building material and this architectural characteristic according to the kind of the module. Therefore the goal of this study is to get securing the application information of BIPV as windowpane. BIPV modules are manufactured in the form of G/G. In the case of the crystal type the Transparent and the light Transmission is to be adjusted by the spacer attitude of the cell. Although this type could not be optimal for light effect of indoors because of the inequality of shade, the moving shade play makes a dramatic Roomimage by the run of sun. The application of this type would be for canopy, window or roof in the corridor or resounds. With amorphous the type it is to be manufactured simply largely laminar, and thus that will shorten building process. There is a relatively good economy to use and to the window system easily. After the production technology is easy the transparency of the modules to adjust, and the module shows to a high degree constant characteristics of light permeability and transparency. Without mottle of module shade is good the use for the window or roof glazing of office, library, classroom, etc. to adapt. The BIPV modules took generally speaking a function as building material to the daylight use, shading, isolation and also to the sight. That means that BIPV modules have as multifunctional system to sustainable architecture good successes and they are at the same time as Design element for architecture effectively.

• The Journal of Information Systems
• /
• v.12 no.2
• /
• pp.129-149
• /
• 2003

One of the important applications in Enterprise Resource Planning(ERP) systems is the Manufacturing Resource Planning(MRPII) system using Bill of Material(BOM). The manufacturing resource planning determines the quantity and timing of the production or purchase of subassemblies and raw materials needed to support the Master Production Scheduling(MPS). The bill of material is the recipe, a list of the materials needed to make a product. This paper intends to suggest a component-based materials management system using Unified Modeling Language(UML), as an application system for automobile part industry. Applying component based materials management systems designed with UML methodology, we analyzed the workflow and the document on materials management process from production planning to inventory management, and implemented a prototype of efficient materials management system, as a surrogate of existing material requirement planning(MRPI) system. To produce many other assemblies for a automobile part firm, component parts are assembled into subassemblies that are joined to assemble the finished product. Through the system suggested in this study, the level of inventory has cut down and the cost of inventory management has decreased. Also, the development method using UML makes the analysis and design phase to shorten in implementation period of MRPII system. The implementation of materials management system using CBD shows the ease of use in software reuse and the interoperability with corporate Internal information system. The result of applying object-oriented CBD technique is to minimize the risk of life cycle and facilitate the reuse of software as mentioned to limitation of information engineering methodology.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.1
• /
• pp.64-71
• /
• 1999

This study was conducted to manufacture MDF panels bonded with PF resins which provide excellent durability and dimensional stability with panels, and to identify benefits and weaknesses of using PF resins for MDF panels that have been manufactured with urea-formaldehyde (UF) resins for interior applications due to its low dimensional stability under moisture conditions. The results showed that the performance of PF-bonded MDF panels satisfied the performance requirement. A six-cycle aging test also revealed that PF-bonded MDF panels had high durability. Thickness swelling after 24 hours submersion in cold water was less than 2 percent, showing good dimentioanl stability. The identified weaknesses of using PF resins were relatively high resin content and long hot-pressing time. An acceptable resin content appeared to be 8 percent which can increase the production cost of PF-bonded MDF panels. The hot-pressing time (7 minutes) used in this study is relatively long compared to that of UF-bonded MDF panels. This result also indicates that hot-pressing process has to be optimized to control various pressing variables.

• Journal of Korea Game Society
• /
• v.12 no.4
• /
• pp.13-22
• /
• 2012

The wide-spread use of the broadband Internet service makes the cloud computing-based gaming service possible. A game program is executed on a cloud node and its live image is fed into a remote user's display device via video streaming. The user's input is immediately transmitted and applied to the game. The minimization of the time to process remote user's input and transmit the live image back to the user and thus satisfying the requirement of instant responsiveness for gaming makes it possible. However, the cost to build its servers can be very expensive to provide high quality 3D games because a general purpose graphics system that cloud nodes are likely to have for the service supports a single 3D application at a time. Thus, the server must have a technology of 'realtime multiple rendering' to execute multiple 3D games simultaneously. This paper proposes a new architecture of 2-tier servers of clouds nodes of which one group executes multiple games and the other produces game's live images. It also performs a few experimentations to prove the feasibility of the new architecture.

• Nuclear Engineering and Technology
• /
• v.40 no.6
• /
• pp.467-476
• /
• 2008

To keep the superconducting (SC) magnet coils of KSTAR at proper operating conditions, not only the coils but also other cold components, such as thermal shields (TS), magnet structures, SC bus-lines (BL), and current leads (CL) must be maintained at their respective cryogenic temperatures. A helium refrigeration system (RRS) with an exergetic equivalent cooling power of 9 kW at 4.5 K without liquid nitrogen ($LN_2$) pre-cooling has been manufactured and installed. The main components of the KST AR helium refrigeration system (HRS) can be classified into the warm compression system (WCS) and the cryogenic devices according to the operating temperature levels. The process helium is compressed from 1 bar to 22 bar passing through the WCS and is supplied to cryogenic devices. The main components of cryogenic devices are consist of cold box (C/B) and distribution box (D/B). The C/B cool-down and make the various cryogenic helium for the KSTAR Tokamak and the various cryogenic helium is distributed by the D/B as per the KSTAR requirement. In this proceeding, we will present the commissioning results of the KSTAR HRS. Circuits which can simulate the thermal loads and pressure drops corresponding to the cooling channels of each cold component of KSTAR have been integrated into the helium distribution system of the HRS. Using those circuits, the performance and the capability of the HRS, to fulfill the mission of establishing the appropriate operating condition for the KSTAR SC magnet coils, have been successfully demonstrated.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.147-154
• /
• 2015

Recently agile development process became increasing effectiveness, quality, attention to experts in customer satisfaction, as evidenced in this methodology when selecting projects promoting productive efficiency. With regard to contemporary needs and user requirements on the methodology selected to meet this paper is the product based Cross functional team suggested methodology Feature Team model to solve problems of this model, and organizing the Cross functional team, this team but this outcome (product) basis, were examined for the model that points to progress the development across multiple product as a functional unit, value-driven agile project through the Skills-based model and proposed a difference. And it examined the Agile Maturity metrics. PRINCE2 Agile Health-check entries future development direction of Agile techniques is a requirement of the project outset has studied the subject objective evaluation by the assumption that they can be changed at any time, not fixed this way and for the project team through research The proposed.

• Journal of Digital Convergence
• /
• v.16 no.10
• /
• pp.205-212
• /
• 2018

With the development of high performance CPU / GPU, artificial intelligence algorithms such as deep neural networks, and a large amount of data, machine learning has been extended to various applications. In particular, a large amount of data collected from the Internet of Things, social network services, web pages, and public data is accelerating the use of machine learning. Learning data sets for machine learning exist in various formats according to application fields and data types, and thus it is difficult to effectively process data and apply them to machine learning. Therefore, this paper studied a method for building a learning data set for machine learning in accordance with standardized procedures. This paper first analyzes the requirement of learning data set according to problem types and data types. Based on the analysis, this paper presents the reference model to build learning data set for machine learning applications. This paper presents the target standardization organization and a standard development strategy for building learning data set.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.2
• /
• pp.273-280
• /
• 2017

As massive integration technology of transistors has been developing, multi-core circuit is fabricated on a silicon chip and a clock frequency is getting faster to meet the system requirement. But increasing the clock frequency can induce some problems to violate the operation of system such as clock synchronization, so it is very import to avoid metastability events to design digital chips. In this paper, metastability windows are measured by bisection method in H-spice depending on temperature, supply voltage, and the size of transmission gate with D-FF designed with 180nm CMOS process. The simulation results show that the metastability window(: MW) is slightly increasing to temperature and supply voltage, but is quadratic to the area of a transmission gate, and the best area ration of P and Ntransitor in transmission gate is P/N=4/2 to get the least MW.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.826-834
• /
• 2002

Asynchronous third generation mobile communication system is able to service Packet Switching through adding GPRS Network to the second generation system GSM. Therefore, it is necessary to study packet traffic service of GGSN node which is due to perform gateway role that GPRS Network is enable to inter-connect with Internet in order to optimize the capability and performance of GGSN. In this paper, the Internet packet traffic model that it is arrived to GGSN node from the Internet is studied and In order to process the Inter traffic efficiently, performance analysis model in GGSN is proposed to optimize packet processing capability of each processor. In order to guarantee QoS requirement of the real time traffic Speech and Video, several scheduling algorithm is applied to performance model and each mechanism is compared with several performance parameters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.491-494
• /
• 2017

Recently, IoT has been supported by ICT technology with a variety of ICT powers. In May 2014, Information and Communication Strategy Committee announced the 'Basic plan for Internet of Things'. Also on Febuary 24 this SAME year, KISA(Korea Internet&Security Agency) provides many projects related to IoT, such as announcement of 'K-Global Project' for start-up and venture support related to IoT and ICT companies. In contrast to the various services of Internet of Things, when a connection is made between object-to-object or person-to-object wired and wireless networks, security threats have occurred in the process of communication. We analyzed these kinds of security threats related to Internet of things, and gave a consideration for requirement.