• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1949-1950
• /
• 2008

Activation battery that are required to deliver short pulses to power, for instance, pyrotechnic devices required during jettison payload separation. Activation battery contains 24 Sony US18650 cells configured as 3 strings in parallel, with each string containing 8 series connected cells. This allows to meet voltage and capacity requirements specified for the mission. In this paper design description and specifications of Activation battery are presented. Qualification test flow and results are also shown to make sure the performance in the predicted space environment. Electrical performance was proven on real equipment load assembly.

• 한국안전학회지
• /
• 제32권5호
• /
• pp.69-75
• /
• 2017

Structural safety evaluation for static strength of thin plate RC member with high strength concrete is conducted in this study. Static strengths were predicted and compared with the experimental values. Predicted values were calculated by the evaluation formula based on the punching shear behavior and the yield line theory which can appear in the plate members. Static load tests were carried out for the specimens with high strength concrete and the test results were compared with the required performance in design. The comparison results show that the specimens with high strength concrete have sufficient structural safety for flexural and punching shear performance required in design. High strength concrete specimens exhibited excellent strength despite their small thickness. The range of concrete strengths applied in this study was about 60 MPa to 100 MPa.

• 대한전자공학회논문지
• /
• 제27권4호
• /
• pp.598-603
• /
• 1990

This study evaluates the performance of an optical receiver for binary phase shift keying (BPSK) signals in the presence of short noise originating from the photo diode and phase noise of the optical source. The case of using I.O. hybrid compare with the fiber optic hybrid to mix received optical signal and laser local oscillator signal. The impact of these noise is minimized if loop natural frequency and power split ratio between data and carrier recovery branch are choosen optimally. Then it is obtained that required laser linewidt to achieve a BER of 10**-9. The results are the same except theat in case of using the fiber optic hybrid the required optical power is twice as much as the I.O. hybrid.

• 한국농공학회지
• /
• 제45권2호
• /
• pp.35-44
• /
• 2003

A system reliability method is proposed to decide reliable serviceability of agricultural irrigation system. Even though reliability method is applied to real engineering situations involving actual life environments and maintaining costs, a number of Issues arise as a modeling and analysis level. This article use concepts that can be described the probability of failure with time variant and series-parallel system reliability analysis model. A proposed method use survivor function that can simulate a time-variant performance function for a lifetime before it is required essential maintenance or replacement to define a target probability of failure in agricultural irrigation canal. In the further study, it is required a relationship between a state of probability of failure and current serviceability to make the optimum repair strategy to maintain appropriate serviceability of an irrigation system.

• 한국시뮬레이션학회논문지
• /
• 제13권3호
• /
• pp.1-10
• /
• 2004

The cell loss probability required in the ATM network is in the range of 10$^{-9}$ ∼10$^{-12}$ . If Monte Carlo simulation is used to analyze the performance of the ATM node, an enormous amount of computer time is required. To obtain large speed-up factors, importance sampling may be used. Since the Markov-modulated processes have been used to model various high-speed network traffic sources, we consider discrete time single server queueing systems with Markov-modulated arrival processes which can be used to model an ATM node. We apply importance sampling based on the Large Deviation Theory for the performance evaluation of, MMBP/D/1/K, ∑MMBP/D/1/K, and two stage tandem queueing networks with Markov-modulated arrival processes and deterministic service times. The simulation results show that the buffer overflow probabilities obtained by the importance sampling are very close to those obtained by the Monte Carlo simulation and the computer time can be reduced drastically.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.55-59
• /
• 2003

In this paper, we estimate the performance requirements of general-purpose DSP for Carrier Recovery of OFDM DVB-T receiver. Firstly, we transported the designed fixed-point OFDM DVB-T model to a floating-point software model written in C. Then, we measured the number of instruction cycles required for operation of Carrier Recovery in time. We use SignalMaster$\^$TM/ DSP platform of LYRtech Inc. as a environment of estimation, and Simulink$\^$TM/ as a graphical interface, Code Composer StudioTM of TI as profiler and compiler, and SPW$\^$TM/ for presenting functional reliability and comparing the performance distortion with fixed-point model. As a result, we show the required number of DSPs in our DSP-based system, and introduce the need of Multi-DSP-based system.

• 한국통신학회논문지
• /
• 제33권6B호
• /
• pp.395-402
• /
• 2008

Aggregate bandwidth required by the internet is expected to be explosively increased. To meet this anticipated need, an ultra high speed internet backbone transport network, capable of supporting up to a Tbps traffic capacity, is required. this thesis examines, through computer simulation and modeling, the technological requirements and assesses the performance analysis and feasibility for implementing ultra-high speed NGI backbone transport network fabric based on WDM technology. The study results are that C/L band EDFA spectral gains for ultra high speed DWDM have been improved from 2.61dB/1.5386dB to 0.03dB/0.096dB by proposed architecture.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2368-2370
• /
• 2000

In this paper, we proposed an inverse hysteresis model to cancel the nonlinear hysteresis phenomenon of a piezoelectric actuator and design a feedback control system based on the inverse hysteresis model. The piezoelectric actuator performs much better in open-loop response. However, the nonlinear hysteresis phenomenon should be linearized and the closed-loop control should be executed to get the required performance in the area, where high-speed and high-accuracy are required. Thus, it is shown by simulation that a good position tracking performance can be obtained for the repetitive desired position trajectory.

• 대한안전경영과학회지
• /
• 제8권3호
• /
• pp.11-25
• /
• 2006

It is necessary to deal with the process capability index carefully because it has been developed with certain assumptions. Companies make a decision on processes through the results obtained by using and treating data extracted from the processes. However if they have incorrect or wrong results, they cannot lead to proper outputs but also bring to loss of the competition in quality. Therefore, this study will show a method to analysis Cp (process capability ; CP) and an idea of mass-production on Pp (process performance ; PP) based on the Sigma Estimate which is one of the uncertainty in the process capability index and makes a lot of error. To apply this method, it is essential to understand and to analyze the processes exactly. Especially, it is required to establish the more accurate process capability index that can quickly and properly respond to changes on processes to recognize the small changes on the process which lies in specification in mass production system that the continual monitoring of quality managers is required.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.541-553
• /
• 2015

Structural Health Monitoring (SHM) systems can provide valuable information regarding the safety of structures during and after ground motions which can be used by authorities to reduce post-earthquake hazards. Strain gages as a key element play an important role in the success of SHM systems. Reducing the number of required strain gages while keeping the efficiency of SHM system not only can reduce the cost of structural health monitoring but also avoids storage and process of uninformative data. In this study, a method based on performance based seismic design of structures is proposed for ideal placement of stain gages in structures. The robustness and efficiency of the proposed method is demonstrated through installation of strain gages on an Airport Traffic Control (ATC) Tower. The obtained results show that the number of required strain gages decrease significantly.