• Journal of the military operations research society of Korea
• /
• v.28 no.1
• /
• pp.47-66
• /
• 2002

Instead of using signal-to-noise ratio, we attempt to optimize both the mean and variance responses using dual response optimization technique. The alternative experimental strategy analyzes a robust parameter design problem to obtain the best settings that give a target condition on the mean while minimizing its variance. The mean and variance are treated as the two responses of interest to be optimized. Unlike to the crossed array and combined array approaches, our experimental setup requires replicated runs for each control factor's treatment under noise sampling. When the postulated response models are true, they enable the coefficients to be estimated and the desired performance measure to be analyzed more efficiently. The procedure and illustrative example are given for the dual response optimization techniques of nonlinear goal programming.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.16 no.1
• /
• pp.19-26
• /
• 2012

Objectives The aim of this study is to develop a cardiovascular simulator that can reproduce blood pressure pulse and blood flow similar to those of the human body. Methods In order to design a system similar to the human cardiovascular system, the required performances were determined by investigating the hemodynamic characteristics of the heart and the arterial system. Main organ to be imitated is heart in simulator. The rest of the system was minimally designed. Also, a blood pressure and blood flow measurement system was developed for measuring the results. Results The developed system showed blood pressure pulse at similar range of the human aorta. The result waveform include primary wave caused by ventricular systole except reflected wave. Conclusions The blood pressure and blow flow patterns were replicated by the simulator. These patterns were similar to those of the human body. The system will play an important role in studying pulse diagnostics.

• Journal of Mushroom
• /
• v.18 no.4
• /
• pp.287-291
• /
• 2020

The nutritional value and yield of mushrooms depend on the substrate on which it is grown. This study sought to biofortify Pleurotus floridanus with calcium supplements and assess its effect on the yield and calcium levels. The experiment was set up in a 2 × 5 factorial and replicated thrice in a completely randomized design. Two calcium supplements, OML and OMW, were added to two growth media. The examination of total dry weight yield showed that calcium supplements OML and OMW in the sawdust medium containing wheatbran in the ratio 1:10 had a mean value of 4.37 g, which was significantly higher (P < 0.05) than that in the control (1.29 g). However, in the sawdust-only medium, there was no significant difference (p > 0.05) in the application of treatments. No significant difference (p > 0.05) was observed between the calcium types in both growth media. The mineral analysis showed that calcium levels were increased in harvested mushrooms with the addition of calcium OML and OMW to the growth media.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.195-202
• /
• 2011

The study focuses on the Repeated Measurements Design (RMD) which observations are periodically made for identical subjects within definite time periods. One of the purposes of this design is to monitor and keep track of replicated records within regular period over years. This paper also presents the classification models of RMD that is developed according to the number of factors in Between-Subject (BS) variates and Within-Subject (WS) variates. The types of models belong to each number of factors: One factor is 0BS 1WS. Two factors are 1BS 1WS and 0BS 2WS. Three factors are 1BS 2WS and 2BS 1WS. Lastly, the four factors include model of 2BS 2WS In addition, the study explains the generation mechanism of models for RMD using Generalizability Design (GD). GD is a useful method for practitioners to identify linear model of experimental design, since it generates a Venn diagram. Lastly, the research develops three types of 1BS 2WS RMDs with crossed factors and nested factors. Those are random models, mixed models and fixed models and they are presented by using Generalizability Design, $(S:A{\times}B){\times}C$. Moreover, the example of applications and its implementation steps of models developed in the study are presented for better comprehension.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.9 no.1
• /
• pp.66-75
• /
• 2002

The main purpose of this study was to develop and evaluate the effectiveness of the standardized patient method in teaching catherization skills, communication skills and students' learning motivation in undergraduate nursing students. The study employed a quasi-experimental method using a non-equivalent control group post-test design. Data were collected over 2 years from August 2000 to September 2001 with 75 sophomore student nurses in one baccaleureate program. The results are summarized as follows ; The scores in catheterization skills and communication skills were statistically significantly higher in the experimental group than the control group. Learning motivation score were also statistically significantly higher in the experimental group than the control group. In conclusion, this study suggests that a standardized patients managed instruction which emphasize authenticity and contex-tualization is very effective in teaching nursing students, the mastery and application of nursing skills, and the utilizing therapeutic communication skills. It is recommended that more standardized patients cases be developed for wider areas of nursing education and this study be replicated with more students using a longitudinal design.

• Korean Journal of Computational Design and Engineering
• /
• v.12 no.1
• /
• pp.50-57
• /
• 2007

In recent years, many robotics researches have been focused on developing human-friendly robots, that is, humanoid biped robots. The researches of humanoid robots include various areas such as hardware development, control of biped locomotion, artificial intelligence, human interaction, etc. The present work concerns the hardware development of a mid-size humanoid robot, BONOBO, focusing on rapid development of outer body parts with integrated application if CAD/CAM/CAE/RP. Most parts are three-dimensionally designed using 3D CAD, and effectively connected with CAE analyses using both kinematic simulation and structural analysis. In order to reduce lead time and investment cost for parts developments, Rapid Prototyping (RP) and CAM are selectively utilized for manufacturing body parts. These master parts are then replicated using the vacuum casting process, from which we can obtain plastic parts repeatedly. Through this integrated approach, the first prototype of BONOBO can be successfully developed with relatively low time and investment costs.

• Wind and Structures
• /
• v.12 no.6
• /
• pp.505-517
• /
• 2009

Synchronous wind-induced pressures, measured in wind-tunnel tests on model buildings instrumented with hundreds of pressure taps, are an invaluable resource for designing safe buildings efficiently. They enable a much more detailed, accurate representation of the forces and moments that drive engineering design than conventional tables and graphs do. However, the very large volumes of data that such tests typically generate pose a challenge to their widespread use in practice. This paper explains how a wavelet representation for the time series of pressure measurements acquired at each tap can be used to compress the data drastically while preserving those features that are most influential for design, and also how it enables incremental data transmission, adaptable to the accuracy needs of each particular application. The loss incurred in such compression is tunable and known. Compression rates as high as 90% induce distortions that are statistically indistinguishable from the intrinsic variability of wind-tunnel testing, which we gauge based on an unusually large collection of replicated tests done under the same wind-tunnel conditions.

• Korean Institute of Interior Design Journal
• /
• v.13 no.5
• /
• pp.74-81
• /
• 2004

The three basic elements of human life -clothing, food and shelter- had been evolved through different periods and cultural realms, as their spatial applications show distinct characteristics that are manifested through sensibilities only inherent to its specific culture. Especially in the interior spaces, possibilities to approach them in three-dimensional aspects allow formal characteristics to be expressed that are distinct to the country. Formal sensibilities embedded in interior space In Korea also follows such pattern, developed through various contemporary interpretations of Korean traditional formal sensibilities, including harmony with nature, simplicity, lightness, real and fake, and principle of harmony are being redefined by spatially expressed in contemporary language. That is, traditional formal sensibilitiesare filtered through various application methods such as composition, negotiation and modification, accommodating spatial manifestations to be not simply preserved nor replicated, but rather reconstructed through metaphor, symbol, abstraction and contrast. From this perspective, the Korean traditional formal sensibilitiesis not a notion fixed in the past, but a distinct perspectives evolving throughout periods of time that are constantly reconsidered and reinterpreted in our interior space. By examining Korean sensibilities manifested in interior space in the both diachronic aspects of tradition vs. contemporary, as well as synchronic aspects among various disciplines simultaneously, we would be able to generate a linkage to the dichotomous categories of tradition and contemporary.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.1
• /
• pp.23-35
• /
• 2015

PURPOSE: People with physical disabilities such as cerebral palsy usually experience obstacles when interacting with computer through conventional keyboard because of their motor disabilities. The purpose of this study is empirically compare of text entry(alphabet and word) speed and accuracy using the three different keyboard type on four students(male 2 and female 2) with cerebral palsy. METHODS: This research design used a replicated single-case experimental approach to compare the individual performance. An alternating treatments design was used to examine the effectiveness of standard QWERTY keyboard and alternative keyboard(mini and big keyboard) on computer access for students with cerebral palsy. To avoid changes in posture that influence a keyboard character entry training and evaluation was carried out using his sitting in a wheelchair. Compass software program used in this study as an assessment tool to measure speed and accuracy when performance of text entry(alphabet and word). This was repeated until the stable status of reaction time. RESULTS: As a result, the alternative keyboard seems to be the most effective device for students with cerebral palsy to perform text entry. But various factors such as peculiarity of motor disabilities, experience and preferences of the user are heavily related. CONCLUSION: Thus, we must perform the objective and systematic assessment for computer access and if sustained training is accomplished, it could to improve speed and accuracy of text entry(alphabet and word).

• Tunnel and Underground Space
• /
• v.5 no.2
• /
• pp.104-113
• /
• 1995

Shear strength of the discontinuity on which the pre-failure of rock slope was occurred during surface excavation was measured through the direct shear test using core samples obtained in-situ. Internal friction angle was increased as the roughness of discontinuity surface(JRC) was increased. Results of the tilt test using core samples of higher JRC also showed very similar trend as those of the direct shear test. When the samples replicated from natural cores were used int he tilt test, results of friction angles showed almost perfect continuation of the residual friction angles from the direct shear test. However, when the gouge material existed in the discontinuity the internal friction angle strongly depended upon the rate of filling thickness to the height of asperity irrespective of the JRC. Based on the results of both direct shear test and tilt test internal friction angle and cohesion of discontinuity, which reflect the in-situ conditions fo pre-sliding failure and also can be used for the optimum design of support system, were assessed. Two kinds of support measures which were expected to increase the stability of rock slope were considered; lowering of slope face angle and installation of rock cable. But, it was found that the first method might lead to more unstable conditions of rock slope when the cohesion of discontinuity plane was negligibly low and in that case the support systems of any kind which could exert actual resisting force were needed to ensure the permanent stability of rock slope.