• Fisheries and Aquatic Sciences
• /
• v.16 no.4
• /
• pp.279-283
• /
• 2013

We tested the effects of various distillers dried grains (DDGs) in a formulated diet on growth and body composition of juvenile sea cucumber Apostichopus japonicus. DDG is a solid residue obtained by filtering an aqueous mixture of fermented rice with Aspergillus oryzae and yeasts. Six isonitrogenous and isocaloric diets (DDG0, DDG-G, DDG-C, DDG-K, DDG-W, and DDG-P) were formulated to contain 20% DDG obtained from different Makgeolli factories. Juvenile sea cucumber (average weight, $2.1{\pm}0.02$ g) were randomly distributed in eighteen 50-L rectangular plastic tanks (40 L of water each) in a seawater flow-through system at a density of 50 juveniles/tank. Three replicate groups of sea cucumber were fed each of the six experimental diets at a feeding rate of 5% body weight per day for 22 weeks. At the end of the feeding experiment, survival and weight gain of the juvenile sea cucumber were not affected by the type of dietary DDG (P > 0.05), and the proximate and amino acid compositions of the whole body were not affected by dietary DDG diets (P > 0.05). These results indicate that rice-based DDG is a potential dietary ingredient that could be used at dietary concentrations of up to 20% for growth of juvenile sea cucumber.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2000.11a
• /
• pp.227-245
• /
• 2000

Korean firms have attempted to catch up in the aircraft industry during last quarter century. Korean firms have built up their capabilities by moving from parts manufacturing through subassembly to system integration. The number of projects carried out and the intensity of technological effort undertaken by firms strongly influences market position and firm performance. However, successful catching up is not simply dependent on capability building within the firm. The national environment (Porter, 1990) in which firms are located plays a pivotal role. The Korean government has been effective in creating a favorable environ-ment in many areas, but has not been able to replicate this success in the aircraft industry. Opportunities for learning in the aircraft industry have been hampered by the small size of the Korean civilian aircraft market and the sophisticated requirements of military systems. A policy of domestic rivalry in airframe manufacture has created too many firms for such a small market. The ability of Korean firms to catch up in the aircraft industry depends on both the internal capabilities of firms as well as appropriate government policies and the involve- ment of government research institutions and universities over an extended period of time. There have been many studies about the catching up of developing countries in mass production (such as automobile, consumer electronics, and recently DRAM), but few in complex systems, such as aircraft.

• The Journal of Korean Physical Therapy
• /
• v.10 no.2
• /
• pp.113-125
• /
• 1998

The neurotropic psudorabies virus(PRV) to replicate within neurons is very useful pathogen for neuronal tracing. I carried out this study to investigate the parametric analysis on the viral infection in the rat circadian control center with two genetically engineered strains out of PRV. The two strains are isogenic with the attenuated Bartha strain of PRV ; in one strain a lacZ reporter gene was inserted into the gC locus (PRV-BaBlu ; $4.75\times10^8pfu/ml$) and the other strain contained a PRV envelope glycoprotein gene(PRV-D ; $2.5\times10^8pfu/ml$) theat is absent in PRV-BaBlu. simultaneous or temporally separated sequential injection of$2{\mu}l$ of each strain into the vetreous body of eye produced a course of transsynaptic infection of retinohypothalamic circuitry. The results were as follows; 1. PRV-BaBlu and PRV-D infected the suprachiasmatic nucleus in hypothalamus and intergeniculate leaflet in lateral geniculate nucleus of thalamus. 2. The rate of PRV infection was dependent upon PRV strain. 3. Pre-infected neurons by PRV-D were interfered with the replication of PRV-BaBlu. 4. Dual injection of PRV-D and PRV-BaBlu showed more virulent than the parental strain.

• KSTLE International Journal
• /
• v.7 no.1
• /
• pp.14-17
• /
• 2006

In this paper, we report on the replication of surface topography of natural leaf of Lotus onto thin polymeric films using a capillarity-directed soft lithographic technique. PDMS molds were used to replicate the surface. The replication was carried out on poly(methyl methacrylate) (PMMA) film coated on silicon wafer. The patterns so obtained were investigated for their friction properties at micro-scale using a ball-on-flat type micro-tribo tester, under reciprocating motion. Soda lime balls (1 mm diameter) were used as counterface sliders. Friction tests were conducted at a constant applied normal load of $3000{\mu}N$ and speed of 1mm/s. All experiments were conducted at ambient temperature ($24{\pm}1^{\circ}C$) and relative humidity ($45{\pm}5%$). Results showed that the patterned samples exhibited superior tribological properties when compared to the silicon wafer and non patterned sample (PMMA thin film). The reduced real area of contact projected by the surfaces was the main reason for their enhanced friction property.

• Tribology and Lubricants
• /
• v.33 no.5
• /
• pp.202-206
• /
• 2017

In this study, the hydrophobicity properties for riblet surfaces that replicate shark skin are simulated. Riblet surfaces with surface roughness on riblets are generated numerically based on the measured data of real shark skin. We assumed that a rib on a scale is hemi-elliptical surface. The surface used in the simulation for the calculation of contact angle is composed of 9 scales like checkerboard type with a roughness. The contact angle of a water droplet can be calculated using the Wenzel equation and Cassie-Baxter equation for the generated riblet surfaces. The variation of contact angles with a fractional depth of penetration for the generated shark skin surfaces without and with coatings is demonstrated in the condition of solid-air-water. The results show that the contact angle for the surface without coating decreases with an increase of the fractional depth of penetration more drastically than that for the surface with coating. We compared the experimental and simulated results. It is shown that the measured contact angles of the shark skin template and the shark skin replica are within the simulated results. Therefore the contact angle of water droplet for rough surfaces can be estimated by the developed numerical method in this study.

• Ocean Science Journal
• /
• v.42 no.3
• /
• pp.135-152
• /
• 2007

The ecological aspect of meiofaunal communities in Can Gio mangrove forest, Ho Chi Minh city, Vietnam has not been investigated before. The composition, distribution, density and biodiversity of meiofaunal communities were studied along an intertidal transect at the Khe Nhan mudflat. Each time, three replicate samples were collected in four stations along a transect following the water line from low tide level up to the mangrove forest edge. In total, 18 meiofaunal taxa were found with the dominant taxa belonging to Nematoda, Copepoda, Sarcomastigophora and Polychaeta. The densities of meiofauna ranged from $1156inds/10cm^2$ to $2082inds/10cm^2$. The increase in densities from the mangrove forest edge towards the low water line was significant Along the mudflat transect, the biodiversity (expressed by different indices) was relatively high at different taxonomic levels but did not vary significantly along the mudflat except for taxa richness. Eighty nematode genera belonging to 24 families with Comesomatidae having the highest abundance 33.8 % were found. Theristus and Neochromadora decreased in densities from the lower water line towards the mangrove forest edge, while Paracomesoma and Hopperia are typical and more abundant at the middle of the mudflat. Halalaimus increased from high on the mudflat to the low water line.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.5
• /
• pp.438-444
• /
• 2013

This paper presents the replication of a desired vibration response by iterative learning control (ILC) system for a vibration motion replication actuator. The vibration motion replication actuator has parameter uncertainties including system nonlinearity and joint nonlinearity. Vehicle manufacturers worldwide are increasingly relying on road simulation facilities that put simulated loads and stresses on vehicles and subassemblies in order to reduce development time. Road simulation algorithm is the key point of developing road simulation system. With the rapid progress of digital signal processing technology, more complex control algorithms including iterative learning control can be utilized. In this paper, ILC algorithm was utilized to produce simultaneously the six channels of desired responses using the Stewart platform composed of six linear electro-magnetic actuators with Halbach magnet array. The convergence rate and accuracy showed reasonable results to meet the requirement. It shows that the algorithm is acceptable to replicate multi-channel vibration responses.

• Journal of the Korean Regional Science Association
• /
• v.33 no.1
• /
• pp.59-68
• /
• 2017

Recently smart City has become a world-widely hot issue. Many cities have been trying to be smarter in solving urban problems. Different Countries and cities have adopted their own approaches. Accordingly, the concept of smart city is defined in diverse ways. This research emphasizes value creation of smart cities. For that purpose, thoughtful sensitivity, accuracy, and speed are critical components in planning smart cities. Among these, thoughtful sensitivity is the most important. Based on these components, policy should be conceived to develop road maps to replicate successful cases to other cities and regions for long-term innovation of regions. Such experiences will be a firm basis for competitiveness and prosperity of our cities.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.91-94
• /
• 2005

With increasing demands for large-scale micro-optical components in the field of digital display, the establishment of large-scale fabrication technology fur polymeric patterns has become a priority. The starting point of any polymer replication process is the mold, and the mold often has flat surface. However, It is very hard to replicate large-scale micro patterns using the flat mold, because the cost of large-scale flat mold was very high, and some uniformity and releasing problems were often occurred in large scale flat molding process. In this study, a UV roll imprinting system to overcome the financial and fabrication issues of large-scale pattern replication process was designed and constructed. As a practical example of the system, a lenticular lens with radius of curvature of $223{\mu}m$ and pitch of $280{\mu}m$, which was used to provide wide viewing angle in projection TV, was designed and fabricated. The roll stamper was fabricated using direct machining process of aluminum roll base. Finally, the shape accuracy and uniformity of roll imprinted lenticular lens sheet were measured and analyzed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.6
• /
• pp.856-865
• /
• 2019

This study analyzed the effect of wearing a vest with an attached electric fan. Korean men in their 20s were given test "fan vests" equipped with fans on the chest, stomach, upper back, or lower back to wear. Participants wore them in a climate chamber set to replicate a summer environment (30±3℃, 75±1%RH, 0.2 m/sec). Subjective sensations and surface temperatures were measured. The attached fan on the front of the vest lowered the temperature of the vest and the skin surface where the fan was positioned, regardless of whether the wearer engaged in exercise. However, a fan attached to the lower back of the vest was effective in lowering the lower back of the vest as well as the upper back, back of the arm, and back of the neck. In addition, subjective evaluations indicated that a vest with fans attached to the stomach and lower back provided a cool sensation. However, it was confirmed that the design of an auxiliary tool capable of dispersing the weight is necessary since the weight of the fans can interfere with the comfort of wearing the vest.