• 한국의류학회지
• /
• 제29권7호
• /
• pp.1008-1017
• /
• 2005

When we develop 2D pattern from replica of human body with small pieces, it is inevitable to have some replica pieces overlapped or departed. In this study, the optimized method of 2D pattern development from the 3D replica pieces was investigated using dress-form. Among six arrangement methods, anchoring two vertexes of a replica to neighboring vertexes of a next replica induces the optimized 2D pattern by evenly distributing stress across the 3D replica pieces. Anchoring neighboring vertexes resulted in automatic widening k overlapping (W & O) the interspaces among replicas of dress-form, thereby stress was distributed more evenly than any other method. W&O arrangement method was verified to be the best by examining the 3D space distribution images between body surface and twelve experimental garments.

• The International Journal of Costume Culture
• /
• 제8권2호
• /
• pp.97-104
• /
• 2005

In this research, the fit of basic dresses was examined, by analyzing and comparing the satisfaction of fitness of basic dresses made by the draping method on a custom-made replica body form and that of a basic dress made by the flat pattern method. Basis dresses were produced by the draping method for each 52 subjects using custom-made body forms, and another kind basic dresses for each subjects were produced by the flat pattern method using measurements of body sizes. Both basic dresses received high scores for the satisfaction of fit, but the basic dresses produced by draping method received higher scores. Thus it is expected to produce a more successful fit by draping a basic dress on a custom-made body form. Future research using more subjects might confirm these results. A more concrete analysis through using additional satisfaction tests could be conducted. For example, each subject might also serve as an evaluator to rate her satisfaction of fit wearing each of the two custom-made dresses. Finally, examining various body forms is suggested.

• 한국의류산업학회지
• /
• 제1권2호
• /
• pp.148-153
• /
• 1999

The purpose of this study was to manufacturing of personal dress form by replica method for draping. The objects were physical body and personal dress form of their torso somatotype. Comparing the measurements of Martin method and of sliding gauge method to examine the fitness of dress form. Dress form was found bigger than physical body. This was due to the transformation in processing that wrap a Suck-Go bandage and pack a polyurethane foam. On the basis of the result, manufacturing of personal dress form and foundation by draping, it was wearing done test on the physical body, through the procedure that investigate the possibility of usage and the manufacture of personal dress form.

• 한국의류산업학회지
• /
• 제6권3호
• /
• pp.399-403
• /
• 2004

대학에서 의류학과 교육은 그 목적에 따라 다양하나 의복구성은 의복제작과정을 이해하는데 필요한 것으로 의복디자인분야 부터 품질관리에 이르기까지 기본과목으로 되어있다. 의복제작은 인체의 이해에 따른 기본원형의 설계로 시작된다. 기본원형은 활용이 다양하여 모든 종목의 의복 패턴 제작이 가능해야 한다. 또한 각 인체 치수에 맞는 사이즈를 등급화하여 초보자라도 누구나 활용할 수 있는 기본원형을 설계하는 것이 필요하다. 따라서 본 연구는 20대 초반의 대학생을 대상으로 입체재단 방법에 의한 기본원형을 제작하여 등급별로 표준화된 치수를 산출하고 연구된 평면재단 방법에 의한 길의 기본원형을 비교 검정하여 적합성을 비교하였다. 석고법에 의하여 제작된 인체모형에서 드레이핑된 기본원형과 연구된 평면재단 방법에 의한 기본원형을 비교 검정한 결과 5단계로 치수를 등급화 하였다. 착장평가 결과 다양한 체형에 만족힌 결과를 얻어 의복구성을 시작하는 초보자들에게 활용하여 교육할 수 있으리라 기대한다.

• Applied Microscopy
• /
• 제40권4호
• /
• pp.267-270
• /
• 2010

The skin is the largest organ of the integument system whose surface is closely related with many physiological and pathological conditions. Various methods are used to understand the structural and functional status of human skin. We would like to present usefulness of scanning electron microscopic (SEM) observation of skin replica and its significance of training module for a novice. The silicon replicas from several regions of the body (hand, finger, forearm, lip, and face) were casted by applying Exafine$^{(R)}$ mixture. The positive replicas were prepared by applying EPON 812 mixture on negative silicon replicas. Some of the negative silicon replicas were cut with a razor blade and surface profiles were observed. The negative and positive replicas were coated with platinum and were observed under the scanning electron microscope. We could investigate the detailed structures of the human skin surface without any physical damage to the subject. The positive replicas depicted real surface structure of the human skin vividly. The cross sectional view of the negative silicon replicas provided surface profile clearly. The scanning electron microscopic observation of the human skin replicas would be useful to study skin surface structures and to evaluate medical and esthetical applications.

• 한국의류학회지
• /
• 제36권4호
• /
• pp.443-455
• /
• 2012

In this research, a woman matched to the average Korean standard size specification of 21-24 years of age was scanned using Cyberware. Rapidform 2004 was used to separate the body zone into fit zone, action zone and design zone, depending on the function of the lower body. Each divided body zone expanded radially using 'offset' by 1.60mm at the cross section of the waist, and 6.36mm at the hip level. Resultant ease values were 1cm and 4cm along the waistline and hipline (respectively), as recommended in previous research. 2C-AN program and Yuka CAD was used to develop a pant pattern from the enlarged 3D body surface blocks. A total of five pants were constructed using conventional fabrics for light weight formal pants. The appearance of the experimental pants were evaluated by five clothing-major evaluators using a questionnaire that consisted of 21 questions. In addition, functional aspects of the experimental pants were also evaluated by wearer while performing five postures for the measurement of ease of movement. It was found that, the method of regional offset and suggested 3D to 2D pattern development generate reasonably good pant patterns. Among the pattern block arrangements, the method B was evaluated as the best way to generate formal pants from the tight-fit pattern, which fit smoothly over the lower body for maintaining ease of movement.

• 보존과학연구
• /
• 통권22호
• /
• pp.81-92
• /
• 2001

The replica experiment of golden bell excavated from the East Three-Story Pagoda at the Gamunsa temple was carried out in order to know the handiwork technique of ancient granule. The size of 0.3mm granule was attached to the golden bell which was 3.4mm bell body by soldering. When we tried to attach the granule by a modern metalwork, we could know that this technique was hard to make the replica bell. We could prove how to adhere strongly to the golden granule by tension testing. First of all, we made the soldering of the same composition as the golden bell excavated from the Gamunsa temple and then prepared specimens for testing to measure the tension strength. It showed that the broken position was not a soldering part. This result showed how the ancient granule could maintain without a break for a long time.

• International Journal of Costume and Fashion
• /
• 제3권
• /
• pp.13-24
• /
• 2003

The purpose of this study was to examine the changes brought by the upper body form using a three-dimensional human body measurement the gypsum method. The developed plane figure was constructed using paper replica to analyze the dimensional shape of the upper torso and to be able to design clothes suitable for elderly women's physical characteristics. The characteristics are analyzed and compared with existing patterns in order to extract the components for the pattern design. The examination was carried out based on the developed plane figures of upper body surface replicas. Type 1, the bent-forward body form, has a wide gap on the shoulder. In Type 2, the gap of waist line was wide at angulus scapulae point. Type 3 was the thin body form, and the girth of the chest, front interscye breadth and back interscye breadth were more level with one another, compared to the other types. In Type 4, the bent-backward body form, there was a wide gap on front shoulder. Comparison with the developed plane figure and existed pattern, items revealed differences in significance included the front and back interscye width between the measured values of the existed patterns and the developed plane figure. Therefore, the basic components of basic bodice pattern for old women were determined in the up-bust circumference and length of the back.

• 암석학회지
• /
• 제25권3호
• /
• pp.299-310
• /
• 2016

여주 고달사지 원종대사탑비는 과거 도괴되어 현재 귀부와 이수는 여주 고달사지에 남아있고 비신은 파손된 채 국립중앙박물관에 보관되어 있다. 탑비를 구성하는 암석은 두 종류로, 귀부와 이수는 조립질 흑운모화강암, 비신은 부분적으로 각섬석 집합체와 2~3 cm 크기의 장석반정이 특징적으로 관찰되는 세립질 흑운모화강암이다. 귀부와 이수의 조립질 흑운모화강암은 여주 일대에 분포하는 흑운모화강암과 전암대자율 및 암석기재적 특징이 매우 유사하다. 반면 비신의 암석은 이 지역 내에서 산출되는 암석과 다소 차이가 있어 국내 화강암의 전암대자율, 암석학적 특징, 탑비의 금석문과 고려시대 고문헌 기록을 토대로 유사한 암석의 산출지를 탐색하였다. 이 결과 북한 해주 지역의 화강암이 색상, 각섬석 집합체, 광물조성, 전암대자율 분포 등에 있어 비신의 세립질 흑운모화강암과 거의 동일하였다. 따라서 해주 화강암이 탑비 암석의 산지암석으로서 가능성이 가장 크며, 원종대사탑비 비신을 복제하기 위한 석재로 가장 적합한 것으로 판단된다.

• 한국의류산업학회지
• /
• 제18권4호
• /
• pp.457-467
• /
• 2016

This study aimed to develop functional underwear for elderly women in their sixties in terms of good fit, wear comfort and body temperature regulation. To satisfy elderly women's physical and metabolical needs, an automatic temperature control system via PCM treatment was applied. Underwear pattern was produced by producing body surface replica, which was derived from 3D body parametric model. Differential ratios of outline length and area between 3D surface and 2D plane were 1.4% and 0.5%, respectively. The reduction rate was determined as 10% through the expert's evaluation. PCM treated fabric showed higher Q-max, meaning that it can facilitate the thermal transition in hot situation. Moreover, it also showed higher insulation to preserve heat and keep warm microclimate in a cold weather. Heat distribution measurements on various body parts revealed that the temperature after PCM treatment was significantly higher. The clothing pressure after 10% pattern reduction showed higher before reduction, at the same time, even lower than the comfort clothing pressure range of $5{\sim}10gf/cm^2$, implying that experimental garment of this research is acceptable in terms of clothing pressure. Evaluation results on the comfort to move in various motions proved that adequate clothing pressure improved the wear comfort in various motions.