• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.973-981
• /
• 2002

Recently, the use of high strength concrete (HSC) has increased dramatically md however, few studies have been conducted on the early-age properties of HSC such as setting. The penetration resistance test (specified by KS F 2436) that is the standard test method for determining initial and final setting times of concrete, may not be appropriate for HSC because of the high viscosity of the mortar mixture. To address this issue, an ultrasonic pulse velocity (UPV) monitoring system was used to investigate the setting behavior of mortar and concrete. The experimental study was carried out to measure the UPV's of mortars and concretes having various water/binder ratios (W/B) and various fly ash replacement levels, during the first 24 hours of testing. Test results showed that the UPV in concrete was developed faster than that of mortar with the same W/B, and that of ordinary concrete was greater than that of fly ash concrete. Typical values of UPV were suggested that correspond to the initial and final setting times, based on following criteria: (1) the penetration resistance method; (2) the instant when the UPV begins to develop; and (3) the instant when the UPV development rate is maximum. The method and UPV monitoring device used in this study is promising for the setting assessment of concrete, particularly for HSC.

• Archives of Plastic Surgery
• /
• v.38 no.3
• /
• pp.295-299
• /
• 2011

Purpose: It is generally believed that alopecia is caused by various factors such as scars, stress, genetical factors, androgens, etc. Androgenic alopecia is one of the most common cause of alopecia and found mainly in males. Propecia (Merck & Co., USA) and Minoxidil (McNEIL-PPC, Inc, USA) were the drugs approved from FDA for treatment of androgenic alopecia. Surgical treatments such as flap, tissue expansion, scalp reduction and hair transplantation can be considered if necessary. Hair micrograft techniques were developed for natural hair shapes and minimal adverse effect. There were attempts to measure the length of the forehead of the Korean young adults. However attempts to classify the shape and location of forehead hairline were rare. This study attempted to find out standard hairlines of young adults in their 20s & 30s and the result would be the guideline of the hairline in hair replacement surgery of male patients in their 40s & 50s. Methods: 200 male adults in 20s and 30s were photographed and measured the length of 11 vertical index lines to determine hairline. The indexes are the distances from hairline to intercanthal midpoint (A), to medial canthus (B), to upper eyelid fissure (C), to lower eyelid fissure (D), to lateral canthus (E) and distance from lateral highest point to medial lowest point, if the hairline is M-shape (F). Additionally, we classified the hairlines into 4 groups, M, horizontal, inverted U and irregular shapes. Results: The most common hairline of male adults in their 20s is inverted U-shape (53.3%), followed by horizontal-shape, M-shape, irregular-shape. In their 30s, inverted U-shape (59%) is followed by irregular-shape, M-shape, horizontal-shape. The M-shape is more frequently found in males in 30s than those in 20s. The mean values of the indexes in their 20s are as follows: A (76.14 mm), B (Rt: 75.78 mm, Lt:76.41 mm), C (Rt: 69.43 mm, Lt: 69.92 mm), D (Rt: 76.92 mm, Lt:77.46 mm), E (Rt: 64.16 mm, Lt: 64.73 mm), F (4.09 mm). Those in their 30s are as follows: A (76.13 mm), B (Rt: 76.114 mm, Lt: 76.02 mm), C (Rt: 69.87 mm, Lt: 70.37 mm), D (Rt: 77.37 mm, Lt: 77.58 mm), E (Rt: 69.63 mm, Lt: 69.85 mm), F (6.14 mm). Conclusion: The knowledge about human body measurement is indispensable to plastic surgeons. In this study, inverted U shape is the most common type of hairline in 30s, and similar distribution is found in 20s. The percentage of M shape in their 30s is elevated more than 10% compared to that in their 20s. The study of hairline shapes and 11 indexes of hairlines can be useful for planning of the hair transplantation and postoperative evaluation. This study being based on photogrammetry, there may be differences between actual distance of curved face and projected distance on flat photographs.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.7 no.2
• /
• pp.256-270
• /
• 2000

Invasive hemodynamic monitoring has become a valuable assessment parameters in critical care nursing in patients undergoing open heart surgery patients. During cardiac surgery, the Swan Ganz catheter is placed in the pulmonary artery. Critical care nurses routinely obtain cardiac output, cardiac index, and pulmonary arterial pressure in these patients. Traditionally, patients are positioned flat and supine for cardiac output measurement. Numerous studies have dealt with the effects of changing position on the hemodynamic variables. However, there are a few studies dealing with patients who undergo cardiac surgery in Korea. Thus, the purpose of this study was to determine the effects of changing position on cardiac output, PAP, CVP, BP, HR and discomfort in patients after cardiac surgery. A sample of 21 adults who had CABG and/or valve replacement with Swan Ganz catheters in place was studied. The data were collected in the cardiac ICU of a university hospital in Seoul during the period from July 28, 1999 to August 30. 1999. In this study, the independent variable is patient position in the supine, 30 degree, and 45 degree angles. Dependent variables are C.O., C.I., CVP, PAP, MAP, HR and patients' perceived discomforts. Subject discomfort was measured subjectively by visual analogue scale. Other hemodynamic data where collected by the thermodilution method and by direct measurement. The data were analyzed by percentile, t-test, ANOVA, Linear regression analysis using SPSS-/WIN program. The results are as follows : 1) Changes in cardiac output were absent in different angle positions, 0, 30. 45 degrees(F=.070, P=.932). Changes in cardiac index were absent in different angle positions, 0. 30, 45 degrees(P>.05). 2) Changes in central venous pressure were absent in different angle positions, 0, 30, 45 degree(P>.05). 3) PAP had no change in different angle 0, 30, 45 degree positions; systolic PAP(P>.05), diastolic PAP(P>.05). 4) Changes in systolic blood pressure were absent in different angle positions, 0, 30, 45 degree(P>.05). 5) Changes in heart rates were absent in different angle positions, 0, 30, 45 degree(P>.05). 6) Patients' perceived discomfort was absent in different angle positions, 0, 30, 45 degree(p<.05). In conclusion, critical care nurses can measure C.O., C.I., PAP, BP, & CVP in cardiac surgery patients at 30 degree or 45 degree positions. This can improve the patients' comfort.

• Journal of Korea Multimedia Society
• /
• v.13 no.10
• /
• pp.1525-1533
• /
• 2010

With the digital terrestrial television broadcasting transition, terrestrial television broadcasting have required the replacement of retransmission facilities for the analog broadcasting installed in the existing apartment, building, cable TV station, MATV system and so on. In addition, new standards have been enacted for retransmission of the digital television broadcasting in MATV system. To deal with this issue, in this paper, we propose a new 8-VSB remodulator that can retransmit signals of the terrestrial digital television broadcasting. Moreover, we present a standard and the process composition of the 8-VSB remodulator, and an experimental environment configuration for performance evaluation. To achieve this, we have implemented the 8-VSB remodulator with the sequential process components comprised of the RF signal retransmission, the TS stream modulator, the RF signal reception and demodulation. Through the simulation, we analyze the performance standard from the measured data such as spurious and phase noise. And then, we measure SNR and EVM of each attenuation step of the signal obtained by the signal processor and the 8-VSB remodulator with the same retransmission environment and conditions. Experimental results show that both the 8-VSB remodulator and the signal processor can be used as equipment for the retransmission of the terrestrial digital television broadcasting. In addition, the 8-VSB remodulator performed well to improve the transmission efficiency for the digital broadcasting signal, compare to the existing signal processor.

• Progress in Medical Physics
• /
• v.27 no.3
• /
• pp.156-161
• /
• 2016

When air discharged from a radioisotope production facility is contaminated with radiation, the public may be exposed to radiation. The objective of this study is to manage such radiation exposure. We measured the airborne radioactivity concentration at a 30 MeV cyclotron radioisotope production facility to assess whether the exhaust gas was contaminated. Additionally, we investigted the radioactive contamination of the air filter for efficient air purification and radiation safety control. To measure the airborne radiation concentration, specimens were collected weekly for 4 h after the beginning of the radioisotope production. Regarding the air purifier, five specimens were collected at different positions of each filter-pre-filter, high-efficiency particulate air filter, and charcoal filter-installed in the cyclotron production room. The concentrations of F-18, I-123, I-131, and Tl-201 generated in the radioiodine production room were $13.5Bq/m^3$, $27.0Bq/m^3$, $0.10Bq/m^3$, and $11.5Bq/m^3$, respectively; the concentrations of F-18, I-123, and I-131 produced in the radioisotope production room were $0.05Bq/m^3$, $16.1Bq/m^3$, and $0.45Bq/m^3$, correspondingly; and those of F-18, I-123, I-131, and Tl-201 generated in the accelerator room were $2.07Bq/m^3$, $53.0Bq/m^3$, $0.37Bq/m^3$, and $0.15Bq/m^3$, respectively. The maximum radiation concentration of I-123 generated in the radioiodine production room was 1,820 Bq/g, which can be disposed after 2 days. The maximum radiation concentration of Tl-202 generated in the radioisotope production room was 205 Bq/g, and this isotope must be stored for 53 days. The I-123 generated in the radioiodine production room had a maximum concentration of 1,530 Bq/g and must be stored for 2 days. The maximum radiation concentration of Na-22 generated in the radioisotope production room was 0.18 Bq/g and this isotope must be disposed after 827 days. To manage the exhaust, the efficiency of air purification must be enhanced by selecting an air purifier with a long life and determining the appropriate replacement time by examining the differential pressure through systematic measurements of the airborne radiation contamination level.

• Korean Journal of Community Nutrition
• /
• v.21 no.4
• /
• pp.378-385
• /
• 2016

Objectives: This study was conducted to investigate the association between sarcopenia and sarcopenic obesity and cardiovascular disease risk in Korean postmenopausal women. Methods: We analyzed data of 2,019 postmenopausal women aged 50-64 years who participated in the Korea National Health and Nutrition Examination Survey in 2008-2011 and were free of cardiovascular disease history. Blood pressure, height, and weight were measured. We analyzed the serum concentrations of glucose, total cholesterol, high density lipoprotein cholesterol, low density lipoprotein cholesterol and triglyceride levels. Waist circumference was used to measure obesity. Appendicular skeletal muscle mass was measured by dual-energy X-ray absorptiometry. Sarcopenia was defined as the appendicular skeletal muscle mass/body weight<1 standard deviation below the gender-specific means for healthy young adults. The estimated 10-year risk of cardiovascular disease risk was calculated by Pooled Cohort Equation. Subjects were classified as non-sarcopenia, sarcopenia, or sarcopenic obesity based on status of waist circumference and appendicular skeletal muscle mass. Results: The prevalence of sarcopenia and sarcopenic obesity was 16.3% (n=317) and 18.3% (n=369), respectively. The 10-year risk of cardiovascular disease risk in the sarcopenic obesity group was higher ($3.82{\pm}0.22%$) than the normal group ($2.73{\pm}0.09%$) and sarcopenia group ($3.17{\pm}0.22%$) (p < 0.000). The odd ratios (ORs) for the ${\geq}7.5%$ 10-year risk of cardiovascular disease risk were significantly higher in the sarcopenic obesity group (OR 3.609, 95% CI: 2.030-6.417) compared to the sarcopenia group (OR 2.799, 95% CI: 1.463-5.352) (p for trend < 0.000) after adjusting for independent variables (i.e., exercise, period of menopausal, alcohol use disorders identification test (AUDIT) score, income, education level, calorie intake, %fat intake and hormonal replacement therapy). Conclusions: Sarcopenia and sarcopenic obesity appear to be associated with higher risk factors predicting the 10-year risks of cardiovascular disease risk in postmenopausal women. These findings imply that maintaining normal weight and muscle mass may be important for cardiovascular disease risk prevention in postmenopausal women.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.15-24
• /
• 2004

The Seokgatap pagoda composed of mainly alkali granite and other minor pink-feldspar granite, fine-grained granite, granodiorite, diorite, gabbro, and tuff. Despite the small loss and damage derived from joints, its peel-off and exfoliation are serious enough to cause the heavy deterioration on the stone surface. The chemical and petrological weathering has partly replaced the original rock-forming minerals with clay minerals and iron oxyhydroxides. Based on the petrogenesis, rock materials of the pagoda is very similar to rocks of Dabotap pagoda and the Namsan granite in the Gyeongju. The central fart of the pagoda has sunken highly, which caused all the corners to split and the structural transformation to become worse. The reverse V-shaped gaps between the materials have broken stones filled in a coarse way. The iron plates inserted between the upper flat stone laid on other stones and tile pagoda body in the north and east side has been exposed in the air and corroded, discoloring of the adjacent stones. The overall diagnosis of the Seokgatap pagoda is the deteriorated functions of the stone materials, which calls for a long-term monitoring and plans to reinforce the stone surfaces. But the main body including the pagoda roof stone needs washing on a regular basis, and the many different cracks should be fixed with glue by using the fillers or hardeners designed for stone cultural properties after removing the cement mortar. In case of the replacement of the stone materials with new stones, it's necessary to examine the pagoda for the center of gravity and support intensity of the materials. The structural stability of the pagoda can be attained by taking a reinforce measure in geotechnical engineering and making a drainage. The ground humidity, which has aggravated weathering and structural instability, should be resolved by setting up a humidity reduction facility. The contamination of lichens and bryophyte around the pagoda and on the surface is serious. Thus biochemical treatments should be given too in order to prevent further biological damages and remove the vegetation growing on the discontinuous planes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.744-753
• /
• 2021

This study suggests ways to improve the standard test method and judgment criterion for the "Eco-toxicity Test" based on the rules and regulations provided in 'performance and qualifying test standards for marine pollution prevention materials and chemicals' in the Republic of Korea. Compared with the relevant references of other countries, this study attempted to find the limitations in the existing standards. As for the growth inhibition test of algae using Skeletonema costatum as an indicator, applying comparative analysis to measure specific growth rates, together with statistical analysis, instead of applying current methods, judged by the appearance of colors from the culture medium was suggested. Considering the exponential growth phase of the test species, the test duration was suggested to be reduced to less than four days. For the test with fish as an indicator, resetting the appropriate body size was suggested to, show consistent sensitivity against chenicals applied during testing. Furthermore, it is necessary to consider the criteria needs, which should be established in reasonable and objective ways. For the testing species, marine rotifer, Brachionus plicatilis could be a replacement for Artemia sp., and a bivalve for fish in the test. To improve the performance effectiveness of the "Eco-toxicity test", it is worth considering the designation of accredited testing institutes, by placing it in the same loop. Thus it is also expected to have a reliable management system in place, having the capacity of cost calculation properly and adjusting testing items if required.

• Animal Bioscience
• /
• v.35 no.10
• /
• pp.1575-1584
• /
• 2022

Objective: An experiment was conducted to evaluate the effects of partially replacing soybean meal (SBM) with sunflower meal (SFM) with added exogenous multienzymes (MEs) on various biological parameters in broilers. Methods: One week-old, 400 broiler chicks were randomly divided into four treatments (control, 3SFM, 6SFM, and 9SFM) with 5 replicates/treatment (20 chicks/replicate). Control diet was without SFM and MEs, while diets of 3SFM, 6SFM, and 9SFM treatments were prepared by replacing SBM with SFM at levels of 3%, 6%, and 9%, respectively, and were supplemented with MEs (100 mg/kg). Feeding trial was divided into grower (8 to 21 day) and finisher phases (22 to 35 day). External marker method was used to measure the nutrient digestibility. At the end of trial, twenty birds (one birds per replicate) with similar body weight were slaughtered for samples collection. Results: No significant effect of dietary treatments was found on all parameters of growth performance and carcass characteristics, except relative weight of bursa. Weight (25.0 g) and length (15.80 cm) of duodenum were significantly (p<0.05) higher in 3SFM than control. Lowest (p<0.05) villus height/crypt depth ratio was found in 3SFM and 9SFM than control. Most of meat quality parameters remained unaffected, however, highest pH of breast meat (6.16) and thigh meat (6.44) were observed in 9SFM and 3SFM, respectively. Lowest (p<0.05) cook loss of thigh meat was found in 6SFM (31.76%). Ileal digestibility of crude protein was significantly (p<0.05) higher in 3SFM (72.35%) than control (69.46%). In addition, amylase (16.87 U/mg) and protease (85.18 U/mg) activities were significantly (p<0.05) higher in 3SFM than control. However, cecal microbial count remained unaffected. Conclusion: Partial replacement (up to 9%) of SBM with SFM, with added MEs can help to improve the nutrient digestibility, intestinal morphology, and digestive enzyme activities without affecting cecal microbial count and growth performance in broilers.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.1057-1063
• /
• 2023

The urban railway sleeper floating track, the subject of this study, is an anti-vibration track to reduce vibration transmitted to the structure. currently, the replacement cycle of resilience pad for sleeper floating tracks is set and operated based on load. however, most previous studies were conducted on load-based structural safety aspects, such as fatigue life evaluation of sleeper anti-vibration pads and increase in track impact coefficient and track support stiffness due to increase in spring stiffness. therefore, in this study, we measure the vibration acceleration of the ballast for each analysis section and use the results of 7 million fatigue tests to calculate the spring stiffness of the resilience pad for each section. the spring stiffness of the resilience pad calculated for each section was set as the analysis data and the concrete vibration acceleration was derived analytically. the adequacy of analysis modeling was verified as the analyzed concrete bed vibration acceleration for each section was within the field-measured concrete bed vibration acceleration range. using the vibration acceleration curve according to the derived spring stiffness change, the spring stiffness of the resilience pad is estimated from the measured vibration acceleration. therefore, we would like to present a technique that can estimate the spring stiffness of resilience pad of a running track using the vibration acceleration of the measured concrete bed.