• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.691-699
• /
• 2008

In the design of a foundation, settlement of the foundation may exceed allowable design criteria even with a competent bearing stratum. In such a case, a piled-raft foundation system may be adopted using piles as settlement reducing component. In this paper, Disconnected Piled Raft Foundation (DPRF) system, which installs disconnected piles underneath the raft and uses the piles as ground reinforcements, is studied as a cost effective design method against the classical piled-raft foundation system. To this end, large size loading tests were carried out on weathered ground changing area replacement ratio and length of piles. The results indicated that the settlement of the reinforced ground was reduced by 34~87% and the allowable bearing pressure increased by 70% on average from those of the unreinforced original ground, respectively. The correlating formula between the area replacement ratio and the load bearing ratio of piles were derived from the test results and numerical analysis. From the correlation, a design method determining the size and the quantity of the disconnected piles to enhance the bearing capacity of original ground to the desired value was proposed based on one inch settlement criteria.

• IE interfaces
• /
• v.14 no.3
• /
• pp.310-317
• /
• 2001

The purpose of this study is to investigate and to develop a decision support system for supporting the outworn facility replacement analysis in shipbuilding. This paper also provides an information system which can be effectively applied to various criteria in decision making. The modelbase of decision support system uses the concepts of the analytic hierarchy process along with an appropriate scoring methods. The AHP represents an improvement over other well-known scoring approaches since the criteria weights of priorities established by the AHP are not based on arbitrary scales, but use a ratio scale for human judgements. The proposed methodology in this research enables the decision maker to evaluate the investment alternatives based on qualitative data and quantitative data in a systematic way.

• Journal of Korea Society of Industrial Information Systems
• /
• v.20 no.5
• /
• pp.45-52
• /
• 2015

The read performance of hybrid hard disk is better than the legacy hard disk and power consumption is also considerably low. As blocks with enough localities may be located in the non-volatile cache whose size is generally limited, an effective block replacement scheme is required. As this replacement is inevitably affected by various parameters, we define this issue as a kind of multiple criteria decision model. To solve this problem, this paper suggests a new block replacement algorithm based on the analytic hierarchy process. Through simulation for our model, we confirmed that the proposed model could be used as a replacement algorithm of the hybrid hard disk as it may improve boot time as well as response time of general applications.

• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.537-544
• /
• 2019

In currently electronic systems, the speed of information integration has increased due to the development of electronic technology. However, due to the increase in the number of parts and groups, the product structure has become complicated. In this paper, a study was conducted to evaluate quantitatively the replacement of a small equipment. First, the level of the replacement was determined through the algorithm for the replacement level of parts. Next, we defined the ease of detail replacment, and the factors for each detail replacement. In order to calculate the weighting of the detail ease, we performed the analysis of the replacement process of subcomponents of communication exchanger and defined the evaluation criteria. Finally, the completion of the evaluation check sheet and the evaluation score table.

• Journal of Korean Society for Quality Management
• /
• v.28 no.1
• /
• pp.57-77
• /
• 2000

A two-dimensional warranty policy, two types of warranty criteria, such as the age and mileage of an automobile, are employed simultaneously to determine the eligibility of a warranty claim. We deal with the analysis of a variety of combined two-dimensional free replacement warranty(FRW) and pro-rata replacement warranty(PRW). In this paper we also propose the analysis of policies with item failures modelled using the one-dimensional and two-dimensional approach, respectively. We obtain expressions for the expected warranty costs and illustrate through numerical examples.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.4
• /
• pp.195-201
• /
• 2014

Purpose: The purpose of this study is to develop guidelines for clinical trial of the total ankle replacement system for premarket approval. Materials and Methods: We selected and analyzed nine peer-reviewed articles whose quality had been proven in a previous phase. Two investigators extracted parameters for guideline criteria, including number of cases, patient age, follow-up period, failure rate, radiographic osteolysis rate, residual pain rate, and percentage of satisfaction. In addition, the inclusion and exclusion criteria were analyzed and developed. Results: Eight level IV studies and one level II study were included. The average number of cases was 159 cases and the mean patient age was 63.5 years. The mean follow-up period was 4.2 years, ranging from two to nine. The average failure rate of total ankle replacement in mid- to long-term follow-up was approximately 13% (2%~32.3%). The rate of osteolysis was approximately 18%. Residual pain was common (21.4%~46%), but overall patient satisfaction was approximately 85.6% (67.5%~97%). Conclusion: The results could be used as criteria for designing the clinical studies, such as number of cases, patient age (over 60 years), and follow-up period (minimum two years). The clinical scoring system and 36-item short form health survey (SF-36) was the most commonly used method for clinical evaluation for total ankle arthroplasty. In addition, the overall results, including failure rate, osteolysis rate, and patient satisfaction, could be used as a parameter of guidelines for premarket approval.

• Journal of Chest Surgery
• /
• v.13 no.4
• /
• pp.405-413
• /
• 1980

A total of 63 patients [42 males and 21 females] underwent multiple valve replacement with artificial valves between January 1975 and August 1980 at Seoul National University Hospital. There were 38 patients with aortic and mitral valve replacement, 22 with mitral and tricuspid, and 3 with aortic, mitral and tricuspid valve replacement. The valve lesions varied from trivial to severe and most aortic and mitral valves had mixed stenosis and insufficiency, while tricuspid valves had only insufficiency. The patients were severely symptomatic in majority of the cases, and belonged to the Classes III and IV [III:45, IV:16] of the NYHA functional criteria. Hemodynamic studies were performed on all the patients. The mean pulmonary wedge pressure was remarkably increased to 19.8 mmHg in aortic and mitral valve lesions and 18.0 mmHg in mitral and tricuspid valve lesions. The mean pulmonary arterial pressure was also increased, while the cardiac index was reduced. In 1977, the average perfusion time was 245.5 minutes for aortic and mitral valve replacement and 181.6 minutes for mitral and tricuspid valve replacement. It has progressively declined to 169.2 minutes for aortic and mitral valve replacement and 123 minutes for mitral and tricuspid valve replacement in 1980. The average period of aortic occlusion also declined after the use of cardioplegic solution. Twenty deaths occurred among the 63 patients operated upon, an overall mortality rate of 30.8%. The operative mortality has declined with successive year from a level of 66.7% before 1977 to 21.1% in 1980. Fourteen patients suffered from a list of postoperative complications, which eventually resolved with adequate treatment. All the survivors were enjoying the levels of daily life activities greater than those existing before the operation.

• Journal of applied mathematics & informatics
• /
• v.26 no.3_4
• /
• pp.493-500
• /
• 2008

In this paper, we first construct a mathematical model for tagSNP selection based on LD measure $r^2$, then aiming at this kind of model, we develop an efficient algorithm, which is called approximate greedy algorithm. This algorithm is able to make up the disadvantage of the greedy algorithm for tagSNP selection. The key improvement of our approximate algorithm over greedy algorithm lies in that it adds local replacement(or local search) into the greedy search, tagSNP is replaced with the other SNP having greater similarity degree with it, and the local replacement is performed several times for a tagSNP so that it can improve the tagSNP set of the local precinct, thereby improve tagSNP set of whole precinct. The computational results prove that our approximate greedy algorithm can always find more efficient solutions than greedy algorithm, and improve the tagSNP set of whole precinct indeed.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.279-285
• /
• 2009

In this study, applied to the industrial water service, it is verified feasibility of break-even analysis method which has not been introduced in Korea. The On-san water pipeline of 7.1km among the Ul-san industrial water service is selected and the optimal replacement time calculated by break-even analysis method is year 2033 to 2044 which will be 53 to 67 years since the pipes were buried. If indirect cost such as the value of lost water and traffic disruption, service interruption, etc. is calculated as 30 and 100% of the direct cost, the financially optimum replacement time is advanced 3 to 9 years. These ways present rational criteria to establish long-term plan for budget and to execute the limited budget efficiently.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.1
• /
• pp.1-5
• /
• 2020

In this study, the objective is to improve the criteria used for statistical comparison of the VLF tanδ (TD) database and failure rate according to water-tree degradation in underground distribution power cables. The aging condition of the KEPCO criteria is divided into 6 levels using the Weibull distribution, and the "failure imminent" condition is quantified by using the statistical end-point of the lifetime parameter of the VLF big-data group obtained from KEPCO. Moreover, new criteria with a 2-dimensional combination of TD, DTD, and a statistical normalized factor are suggested. These criteria exhibit high reproducibility for the detection of cables in an imminent failure state. Consequently, it is expected that the adoption of the extended VLF-2019 criteria will reduce the asset management cost of cable replacement compared to the VLF-2012 criteria of KEPCO.