• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.5
• /
• pp.746-750
• /
• 2015

In this paper, we propose a simulator to evaluate the performance of the semi-active laser guidance or the quadrant photodetector and to simulate the laser power reflected from a target. The laser pulse repetition frequency was generated and synchronized with the laser pulse repetition(PRF) code. To evaluate the performances of the proposed methods, we implemented a prototype system and performed experiments. As a result, the generated high voltage was variable in the range of DC 3V to 340V and has the rate of change of 2000 V/s. PRF code can be generated within 50ms ∼ 100ms and the error is implemented within 0.3ns. The laser output is synchronized with the PRF code and has a dynamic range of 23.6dB.

• Journal of IKEEE
• /
• v.15 no.2
• /
• pp.171-178
• /
• 2011

In this paper, a novel pulse repetition interval (PRI) jittering coder based on quasi-random M-sequence codes is proposed for improvement of counter-countermeasure capability in a radar. Each of the proposed jittered 256 PRI codes has a unique code chip combination with 256 code chips, such that any set of three consequent code chips (4 pulses) from any code appears only once among the entire code chip sequences of the codes. This indicates that only 4 of received pulses are enough to determine uniquely the exact timing position of the incoming pulse train (or code chip sequence) required for counter-countermeasure, as well as the identity of the transmitted code. To prove the proposed idea experimentally, the jittered PRI coder is implemented and demonstrated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.12
• /
• pp.1768-1770
• /
• 2016

In this paper, we propose a construction method of fractional repetition codes, a class of distributed storage codes, using relative difference families. The proposed codes can support multiple replication degrees for data symbols. It is shown via simulation that the proposed codes store more data than the random fractional repetition codes.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.59-64
• /
• 2024

The small tracking radar randomly changes the transmission period to avoid deceptive signals such as RGPO (Range Gaet Pull Off) operated on the target. Since the code repeats after a specific section, it becomes difficult to avoid a deceptive signal when the repetition is exposed. In this paper, a more realistic transmission pulse code is generated by adding random code generation through FPGA and system white noise. We present the research results of code generation that generates PRF that can avoid repetition while using pseudo-random code in EPROM using FPGA. Also, the result of designing random PRF pulse was confirmed by applying it to tracking radar.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.39-46
• /
• 2007

The purpose of this study was to develop a comprehensive posture classification scheme considering the effects of external load and motion repetition as well as those of working posture. The scheme was developed based on a series of existing empirical studies dealing with postural classification scheme, effects of external load and motion repetition. Ranges of joint motions, external load and motion repetition were divided into the groups with the same degree of discomforts. Each group was assigned a numerical relative discomfort score of code on the basis of discomfort values for the neutral position of elbow flexion. The criteria for evaluating stress of working postures were proposed based on the four distinct action categories, in order to enable practitioners to apply appropriate corrective actions. The proposed scheme was compared with OWAS, RULA and REBA. The comparison revealed that while the proposed scheme and RULA showed similar results for the working postures with light external load and non-repetitive postures, the former overestimated postural load for postures with moderate or heavy external load and repetitive postures than the latter.

• ETRI Journal
• /
• v.21 no.4
• /
• pp.29-40
• /
• 1999

In this paper, we show the robustness of a proposed system using both a frequency diversity and a time diversity effect when the channel assumptions are relaxed such that all sub-bands are not independent fading. We take time-repetition coding with interleaving such that the repetition code symbols are spaced sufficiently far apart to guarantee time diversity. We also incorporate offset multicarriers into a proposed multicarrier DS-CDMA system in a different way compared to that of [10] to reduce the total multiple access interference. When we take a convolutional encoder instead of a time-repetition encoder, and again use both time diversity and frequency offset, then we can obtain the significant performance gain.

• Journal of Sensor Science and Technology
• /
• v.25 no.5
• /
• pp.303-309
• /
• 2016

In this paper, we introduce a new method for controlling the illumination of LEDs in visible light communication (VLC) by changing the duty cycle of Manchester code. When VLC data were transmitted in Manchester code, the average optical power of the LEDs was proportional to the duty cycle. In experiments, we controlled the illumination of a $3{\times}3$ LED array from 10% to 90% of its peak value by changing the duty cycle of the Manchester code. The synchronizing clocks required for encoding and decoding the Manchester code were supplied by pulse generators that were connected to a 220 V power line. All pulse generators made the same pulses with a repetition frequency of 120 Hz, and they were synchronized with the full-wave rectified voltage of the power line. This scheme is a very simple and useful method for constructing indoor wireless sensor networks using LED light.

• Management Science and Financial Engineering
• /
• v.12 no.1
• /
• pp.127-142
• /
• 2006

In this paper, we present a frequency reassignment problem (FRP) that arises when we add new base stations to resolve hot-spots or to expand the coverage of a code division multiple access (CDMA) network. For this problem, we develop an integer programming (IP) model along with some valid inequalities and preprocessing rules. Also, we develop an effective heuristic procedure that solves two sub-problems induced from the original problem in repetition. Computational results show that the proposed heuristic procedure finds a feasible solution of good quality within reasonable computation time. Also, the lower bound by-produced from the heuristic procedure is quite strong.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.28-38
• /
• 2013

In this paper, we propose a improved turbo equalizer which generates a feedback signal through a simple calculation to improve performance in single carrier system with the LMS(least mean square) algorithm based equalizer and LDPC(low density parity check) codes. LDPC codes can approach the Shannon limit performance closely. However, computational complexity of LDPC codes is greatly increased by increasing the repetition of the LDPC codes and using a long parity check matrix in harsh environments. Turbo equalization based on LDPC code is used for improvement of system performance. In this system, there is a disadvantage of very large amount of computation due to the increase of the repetition number. To less down the amount of this complicated calculation, The proposed improved turbo equalizer adjusts the adoptive equalizer after the soft decision and the LDPC code. Through the simulation results, it's confirmed that performance of improved turbo equalizer is close to the SISO-MMSE(soft input soft output minimum mean square error) turbo equalizer based on LDPC code with the smaller amount of calculation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.11
• /
• pp.1311-1319
• /
• 1992

In the partial-band interference and Rayleigh fading environments, the bit error probability equation of FH/MFSK signal has been derived and the error rate has been evaluated. And the results are shown in graphs and discussed. Here, to improve the error rate performance the repeated diversity and the error-correction coding techniques are adopted. The degree of improvement of error rate performance has been found out in diversity and coding techniques respectively. In diversity case, repetition number is taken as a parameter and in coding case, as the error-correction codes Hamming code, BCH code, and convolutional code are introduced. From the obtained results, we have known that the increase of the number of repetition in diversity technique has been brought a little improvement of performance but the coding technique considerable improvement and in particular, convolutional code is very effective. Therefore, coding technique is considered to be better than repeated diversity to cope with Rayleigh fading and partial-band interference.